having a memory problem

Similar Questions

• failure of migration on wifi. error message. programs do not work. anyone else having the same problems?

  failure of migration on wifi. error message: migration quit unexpectedly. Apparently, the migration is yet complete, but with a lot of mistakes. many programs on the new computer do not work. anyone else having the same problems? never had any problems with apple before. Maybe it's my last mac.

  Migration via wifi is a bad choice, physically connect the two PCs with an ethernet cable is the best solution. Start the computer in recovery (command-R) and erase the boot partition. Then reinstall Mac OS X and migrate again using ethernet. Some programs such as MS Office may still have a problem and need to be reinstalled.

• Equium L20-197 - memory problem

  I have memory problem with pc-world of computing L20 and currys sell the L20 with suite spec 256 MB of main memory and 128 MB of video memory (up to 128 no) when this is not the first case of all memory is shared and there are 64 MB main memory and when you try memory video in bios , it won't let you upward in rising to 128 unless you install another memory stick no matter who else noticed this problem? I know that the previous model of the L10 with intel video chipset was supposed to allocate depends of the video memory load, but there is no mention of this on the ati chipset model. all the ideas!

  Hello

  AFAIK usually specification is 32 to 128 MB shared memory. Probably, it should be possible to put it in the BIOS. On some units with ATI graphics card, it is possible to put it under properties of ATI (display properties > advanced). There is an option to change the value of the AMU which will change the RAM allocation shared to the graphics card. It's usually adjustable 16 MB, 32 MB, 64 MB and 128 MB.

  Can I really don t give you answer correct but my friends a laptop with 512 MB RAM and it works fine.

  Good bye

• After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem

  After that I went to El Capitan, my computer would be close and take forever to reboot.  I took it to the Genuis Bar and they said it was us who extinguished the FileVault.  I've updated the software on 1: 1 and now, I'm having the same problem again.  The computer turns off and sometimes it takes me an hour or two to get started again.  Help, please!

  refer to this article and move forward with the NVRAM reset at the end.

  Reset the management system (SCM) controller on your Mac - Apple Support

  If the problem persists, how long have you made it Go?

  I would bring out there, but first call Apple.

• Siri handsfree works intermittently after updating iOS 9.2. Anyone else having the same problem?

  Siri handsfree works only intermittently after updating iOS 9.2. I have a Mustang from 2015 with my ford touch. Siri handsfree worked perfectly before the update. Now when I use it it disconnects sometimes. Anyone else having the same problem?

  Yes, I have the same problem with my Ford Escape of 2013 using MFT version 3.8 (just installed).  Use IPhone with IOS 9.2 6.  I can call him only intermittently SIRI when I use the long pull on the switch.  Also, when I do it, SIRI goes my audio setting that I played (usually USB iPod) to BT audio.  I'm trying to see if the fix suggested elsewhere for the BT audio works but were unable to invoke SIRI to check.  Ford Sync experts were of great help and finally told me to go to the dealer.  I read somewhere after a 'google' search a person represents himself as a guy HE said it's a problem of IOS and Ford does not change (code) until we as customers.  That's all I know right now.

• My wifi cut continuessly and I bought an optus modem and im having the same problems can anyone help?

  what I did to my computer?

  what I did to my computer that makes my wifi cutting continuessly and I bought an optus modem and im having the same problems can anyone help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:

  Try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• I'm having a little problem with my Windows Live Hotmail, if I try to send a new e-mail, it takes me to Windows Live highlights page.

  I'm having a little problem with my Hotmail, if I try to send a new email, it takes me to windows live highlights page, if I do a search, it won't take me to the first pages of search and it takes me to the windows live made highlights page. If I try to remove messages from hotmail, it takes me to the windows live made highlights page

  driving me crazy

  I did a system restore, reinstalled IE 8 defragmented and run an anti virus scan, please help

  original title: I'm having a small problem with my Hotmail

  Hello PaulaSteptoe,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• having video display problems - C000D11DA error message - how to fix

  having video display problems - C000D11DA error message - how to fix

  Hello RobertHollman,

  -You try to play the media file online or the file that is saved on your computer?

  -What version of Media Player do you use?

  This problem occurs if the management of digital rights (DRM) system is damaged on your computer.

  Follow the steps listed in the article below to solve the problem:

  Error message when you use Windows Media Player 10 to play multimedia files online: "C00D11DA - Windows Media Player cannot play, synchronize, or burn a protected file because an error occurred when checking the license."

  Thank you!

• Why start having internet connection problems when I watch a lot of videos in windows vista?

  Why start having internet connection problems when I watch a lot of videos in windows vista?

  Bandwidth saturation, perhaps?

• Having a few problems of weird text on windows vista

  Im having a few problems of weird text really I'm lucky, I have some experience with computers, I tried to switch my keyboard language and end the explorer.exe process, then open it again found that no answer here is a picture of the problem http://imageshack.us/photo/my-images/202/problemsz.jpg/

  He was everywhere in the system, but I already solved it I think I might have messed around customization and messed up my 'theme' I think that I had to change back to windows vista basic and change the font type: P thanks for the reply

• My data hard drive is about to die, or it is related to a memory problem?

  My windows 7 x 64 operational system joined as well as all my applications is installed in an ssd and there is a hard drive to store data. My system is as follows:

  Motherboard: GIGABYTE GA-X58A-UD3R

  MEMORY: KINGSTON KHX1600C9D3K3/12GX DDR3 12GB (3X4GB) PC12800 1600 MHZ HYPERX GENESIS TRIPLE CHANNEL KIT

  CPU: Intel Core i7 930 (s1366, 2.80 GHz)

  PSU: Enermax MODU87 + 700W 80 + gold PSU EMG700AWT

  HARD drive: Western Digital Caviar Black 1 TB HDD (64 MB of Cache, 7200 RPM, Sata III)

  SATAIII SSD : SSD Samsung 840 PRO Series 265 GB (model MZ-7PD256)

  I rarely have the problem which is depicted in the icons following (I speak for hard drive data storage):

  No preview of the photo, but I can see a specific image when I double click on it

  

  

  records are missing

  

  After this problem, I went to check if the same thing was happening in the icons in the primary system ssd. Therefore, I went to start--> pictures--> sample photos and I could see a glimpse of the images.

  

  I was also able to move through each folder I wanted in the ssd. Then I double clicked on 'computer' icon and the following happened.

  

  I was able to close the window without any problem. I think that it is a hard drive problem, but could also be a memory problem. What is your opinion on that? Another weird thing that happens, is the loading time on a cold start the msconfig.exe file. Sometimes the file loads instantly and other times it takes several seconds (7-10) to load on the screen. If it is not a cold start, then the file always loads instantly. The same thing happens also with the Task Scheduler. It seems very strange to me. Please note that Superfetch, Prefetch, Defrag, Windows backup and indexing are disabled.

  Finally, I found the solution to my problem. When I got a memory low message (12 GB of installed RAM memory) I couldn't believe my eyes.

  

  I immediately opened the resource monitor, went to the memory tab and I just saw the dllhost.exe file has consume all memory. I thought that this file was infected and I checked both versions of them (x 64 & x 86) with virustotal, but it wasn't the issue. When I read that this file system is loaded to restore media files in thumbnail view in windows Explorer, I remembered that I had a defective mp4 file that could not be opened. I knew I had to do. I had to delete this file. The problem is that while you try to remove a defective media file, the dllhost.exe file tries to make it, so you are not able to delete until the end of dllhost.exe through process Explorer process.

  Conclusion: When you see a media file that it is not rendered in the thumbnail, view then this file is probably defective and the dllhost.exe goes to an infinite loop, while he tries to make this file, until it consumes all your RAM memory!

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Microsoft Photo Viewer memory problem / unable to print images... (2 questions)

  The other day I tried to print a photo (.jpg file) color - so I deactivated the "Print in grayscale" checkbox in the properties of the printer (just like always).

  But after clicking on the OK/Print button in the Print Wizard Photo, 4 the same error windows pop up.

  Translated from Danish:

  "An error occurred during printing.
  "The images cannot be printed due to the following error:

  ... But there is no description of error?

  Now 4 error popups every time I try to print an image (.jpg or .png) - but NOT when you print documents containing images (.pdf and .odf) that prints very well.
  .txt files print as well...

  Standard Windows 7 Photo Viewer no longer works. He tells me that I have not enough memory on my system to display the selected image (.jpg-file 3 MB)...

  I'm on a system Windows 7 Home Premium with 4 GB of RAM installed - I'm only using about 1 GB of them at the moment - is NOT a memory problem.
  The CPU usage is also about 1%...

  Any thoughts?

  Kind regards

  I hate this chime late trying to solve this problem, but I had the exactly the same problem (per month) and finally resolved.

  What has not worked:

  • Reinstall Windows 7 as an upgrade on the spot.
  • Upgrade to Windows 8 (improved the situation, but did not fix)

  What makes:

  • Create a new user account, it set until I transferred the old user account settings.
  • Set the color management settings.

  Before you reinstall, I suggest to create a new user account and try printing once logged into the new account. If the photo printing Wizard works when logged in with a user account, the problem is specific to the settings for the user account with the problem.

  To check the color management settings try this:

  • Click Start
  • Color in the search box type
  • Click on color management in the results of the research
  • Click the Advanced tab
  • Make a note of any settings that do not start with the system default
  • Change all settings that are not listed as default from system to system default
  • Close the color management dialog box and try again the Print Wizard

  In my case it was a colour profile Adobe corrupted causing the problem.

• When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours Unite

  When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours uninstalling a bunch of useless software on my laptop and still photography will not merge the HDR sequence. It worked once before, but now it does not work. Help!

  I just 8 GB of RAM and have been able to put together five separate images HDR images. I compared these files 5-image HDR with files - 2 and 3-image and see improvement very few (if any) using all five. Your results may vary, but you can try to reduce the number of images until you get your new laptop.