Similar Questions

• Satellite L50 - B 241 - headset not recognized

  Hello, I just got a new laptop at work, (it's a L50 - B Satellite 241. it uses Windows 10, although I suspect it was sold with Windows 8.1 when I put in my headphones, the sound does not pass by the helmet. when I check the sound settings (right-click the volume) I see only the speakers as a choice no helmet). I checked the device manager and I see only Conextant Smart Audio HD, which I believe is for the speakers, no mention of the headset;
  So it appears the driver for headset are not installed? any ideas how to fix this please? in the office they gave me a USB headset but I would use a normal 3.5 jack

  Thank you!

  Hello world, anyone have any ideas on that? Thanks in advance

  Conor

• Headset not recognized

  Anyone had a problem with their phone without acknowledging when the headphones are plugged? I found that my sennheiser on ear together are not recognized, while my headphones and play in the area.

  Unfortunately my most ear those are by far my favorite. The only difference is that the entrance is a few mm short, but there was never question of am on other phones.

  Hopefully im missing something obvious or there is an easy solution for this.

  Try to clear data for smart connect under settings-applications-all. Also, clean the 3.5 mm input.

• Inspiron 15R 5537 helmet is not recognized.

  So I bought 5537 yesterday with win8. When I plug my headphones, it is not recognized. Audio continues to play through speakers. I've seen people with the question the other way where speakers did not work for them but because of helmet. The helmet is not a microphone (this is the problem?) I have tried many headphones, none of them have been recognized. I was on the last commands of Realtech, I uninstalled to try if it works. But still not a go. :(

  Ashwas

  The helmet is not a microphone (this is the problem?)

  This should not be a problem. The headphone jack ("combo") will work with a smart phone earphones headphones or with ordinary headphones. The problem with taking the combo, it's that it will work only with smartphone headset microphones, not ordinary microphones.

  If you had a problem caused by the wrong configuration, then re - install the audio driver would fix it. Try to reinstall the Realtek driver and if it does not then you probably have a hardware failure. Contact the technical support. You also have the option to return the laptop in the short period of return.

• Peripheral PnP USB - muted, is unplug sound when not touched, "device not recognized" or a malfunction, etc...

  Here is an exhaustive list I hope what happens (it's the Microsoft forums, so I think you guys are going to read a lot of information):

  • The sound on my PnP USB audio device cancels randomly without any reason. It is not to be touched at all, and often happens when I'm even not listen to all the sounds.
  • Before he died, it emits a blur in the helmet noise as it is to be disconnected or the cord is cut or something. I have to unplug it and plug it back several times to make it work.
  • It has been for several months, working properly, this month started anything, for about a week.
  • I can't use my headset because it is loose. I had the USB key to solve this problem, because it's too expensive get taking fixed. I did not buy the device at first hand, I got it from a family member who took my laptop in for repair and the guy he recommended and we sold two of these jacks.
  • When it goes off during a game, I can't sound to return. Sometimes I can fix it on a game (as Portal 2, for example) by going to options and change the type of sound (or any) what's called it headphones to speakers, then back to the helmet. However, the game freezes often when the sound goes off and I have to remove the usb key, and in this case the game should also be repeated. In addition, everything has sound options like that.
  • This happens randomly, but it tends to happen every five minutes or every few seconds, and coincidentally it almost always happens during a loading on a video game screen.
  • It is not always give me a warning sound, especially on the games. He's just quiet.
  • Device Manager does not display a point of exclamation or question marks next to any audio device and the key USB pnp is indicated correctly. In the options of the sound in the Control Panel, there is of the sound bars next to the USB key that indicates that his is read, but it is not in playback mode. The USB pnp is listed as default device, so don't tell me to do. The microphones are turned off as well.
  • It does the same thing in all my usb ports.
  • The driver is up-to-date and meant for Windows 7.
  • I do not install the Windows updates. Updates are bad.
  • Box for what he calls a "USB stereo Audio Adapter external" StarTech.com, or "ICUSBAUDIO". It came with a disc that I used to install the driver, and I went on their website to get one for Windows 7 specifically and installed.
  • I use a computer laptop 64 bit Windows 7. In Device Manager, there are three things listed under sound: Realtek High Definition Audio Intel (r) display Audio and USB PnP Sound Device. None of the USB devices have exclamation points.
  • For the first time today, when the usb unplug sound, my computer tells me "Device not recognized" and said it could have malfunctioned. When I clicked on it for more information, he said that he could not tell me what the usb was even because it was not plugged in, which was not true. I also had a window appears which has tried to install the device driver (already installed) and then was told that the unit had been disconnected before he could do (not true). It just happened, for the second time today a few seconds ago.

  Hello

  Check out the link and run the Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Install the Windows updates as some updates can fix a problem.

  As you mention that the computer is second hand troubleshooting accurately would be difficult. I suggest you contact the manufacturer. Check out the link.

  http://www.StarTech.com/support

• HAMA USB headset does not

  * Original title: headphones to LISTEN USB HAMA STATUANT upward

  I recently bought a pair of headphones "HS-540" Hama USB with microphone and it worked very well for about two to three days before you start all of a sudden stop to work in use (headset and microphone; I did not hear anything and microphone wouldn't work). I have to take out usb and then reconnect a new and suits, sometimes for only two seconds, sometimes more.

  I use Windows 7 64-bit. The helmet is not their own pilot; they installed a windows one.

  I tried to restart the pc, reinstall the driver and so on, but the problem is persistent. I tried the headphones on your laptop, too, which uses Windows 7 64 bit and they did not at all to waste.

  Hello Nnnatal,

   
  Thanks for posting your query in Microsoft Community.
   
  I understand that you are facing problems with the headset doesn't work does not correctly on your Windows 7 computer.
  I can understand how frustrating it can be when things do not work as expected.
   
  The probable cause of this problem could be because if the hardware device driver not recognized on the computer.
   
  To better understand this issue, I would like to know the following information:
   
  1. did you of recent changes to the computer before this problem?
  2. What is the brand and model of the computer?
  3. do you have an error message when the headset is not working?
   
  Lets try the following method and check to see if it helps:
   
  Method 1: First of all, I suggest to run Windows built-in troubleshooting (Recording Audio Troubleshooter) to get the problem of automatically detected and fixed
   
  Open the troubleshooting of Audio recording
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
   
  Method 2: Use the following steps and ensure that the default audio device is properly set.
   
  1. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.
  
  2. click on the recording tab, click Microphone, and then click Properties.
  
  3. click the levels tab and make sure the mute button is enabled, if off to click on it to activate sound for this connection and then click on apply.
  
  4. to listen to the sounds of the microphone through your speakers or headset, click the listen tab; Click on listen to them this peripheral box.
  
  5. click on the Advanced tab, click to disable the applications to allow him to take exclusive control of this devices check box, and then click OK.
   
  Method 3: If the problem persists always download the Hama headset drivers on the manufacturer's Web site and check to see if it helps:
  https://www.Hama.com/service/download/drivers/headsets
   
  Additional information:
   

  You can also view help on the question below links.

  Connect a microphone music player or any other audio device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Tips for the fixation of the sounds common problems.
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   
  I hope this helps. Feel free to write us again for any further assistance. We will be happy to help you.

• Logitech h340′s headset does not install correctly. "Unknown device".

  I use Windows 7 and comes from my brand new Logitech h340′s headset to connect to the PC via the USB port. Unfortunately, the device is not recognized and the driver so do not install automatically, so I can't use my headset.

  Here is the message I get:

  "Unknown device".

  "Windows has stopped this device because it has reported problems. (Code 43) »

  Then when I try the convenience of Windows it tells me that 'the best driver for your device software is already installed. Windows has determined the driver for your device software is up-to-date. »

  Device type: Bus USB controllers
  Manufacturer: (host controller USB Standard)

  I tried to restart, but it still does not work.

  All Windows updates have been installed.

  I really don't know what to do to be able to use my newly purchased helmet.

  Thanks in advance for your help.

  Hello Soraya,

  Thank you for reaching out to us on Microsoft Community.

  Before I can give you some suggestions to solve this problem, I want to collect the following information from you:

  • What is the brand and model of your computer?
  • Significant changes have been made on the computer before this problem?

  I would like to inform you that, "Windows has stopped this device because it has reported problems. (Code 43)" may occur if the peripheral equipment fails or if the device driver fails.

  Step 1.

  I suggest you follow the steps in the following link:

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  See: Also the error codes in the Device Manager in Windows

  Step 2.

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  • Click Startand then click Control Panel.
  • Click system and Maintenance, click System, and then click Device Manager.

   

  Note: If the control panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  • In Device Manager, double-click to expand the 'Bus USB controllers', right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  • Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.

• iTunes not recognizing iphone

  Hey guys, last updated itunes is not recognizing my iphone.

  Uninstalled and reinstalled iTunes several times, everything is up to date. I also tried the thing of driver device manager update, but the apple usb driver is not present even after I have reinstall and uninstall iTunes, all solutions? p.s Also running windows 10.

  Hello, you should see this article, it will help you If iTunes does not your iPad, iPhone or iPod - Apple Support

• My IPhone 6 is not recognized by my IMac

  My IPhone 6 is not recognized by my IMac

  What operating system do you use? If you mean that it is not recognized by iTunes and you use 10.7 as your profile is displayed, you will need to upgrade your operating system to get the latest version of iTunes.

• Logitech C310 Webcam not recognized

  I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

  Anyone else have a similar problem with a Logitech webcam that faces a problem?

  Contact Logitech technical support. The camera may be incompatible.

• Updated itunes 12.5.1 and iPhone not recognized now

  I upgraded to itunes 12.5.1 and now my itunes does not recognize my iphone when it's connected.  I have a new laptop with Windows 10.  Can anyone help please?  I want to save my phone before I upgarde to the new iphone 10.0 software.  Thank you!

  Hey cbaron12,

  Thank you for being a part of the communities of Apple Support.

  I understand that your iPhone is not recognized in iTunes on your Windows PC.  It of a good idea to always backup your iPhone, so in order to get this problem solved, please follow the steps in the link below.

  If iTunes does not recognize your iPhone, iPad, or iPod

  See you soon.

• iPhone, iPad Air 2 not recognized by iTunes

  Very frustrated right now. Given that Apple's Support is not in contact with return despite requests, the story will go here. I have Windows 10, iPhone 6 + and iPad Air 2. Last weekend I was invited to and did pass to iTunes 12.5.1.21. Plugged my iPhone 6 +. Not recognized by iTunes; 'sync' gray. Tried the same thing with my iPad 2 Air. Same result. I get no error message.  Here are my troubleshooting - what I'm missing, Apple?

  1. Lightning card Checked, works fine with other devices.
  2. Rebooted PC.
  3. Rebooted IPhone.
  4. Restarted iPad Air 2.
  5. I've tried different start up sequences (start iTunes connect manually; first)
  6. Went to 'Upgrade device via Device Manager' - these devices are working properly.
  7. Updated my iPhone and iPad 2 air for iOS 10 successfully.
  8. Apple email support; 48 hours later they gave me another email address for contact.
  9. Chose the Contact Apple Support via phone option - screen "we will call you - your phone will ring at any time.  Still waiting for the phone to ring.
  10. From Discussions on Apple's site with troubleshooting tips, have tried all suggestions with no luck - If iTunes does not recognize your iPhone, iPad or iPod - Apple Support.
  11. I even opened and closed the blinds completely throughout my house to see if that would help.  Go figure.
  12. The last resort on them, says "Contact Apple support" - see #9 above.  Twice.

  Apple-Support - What should I do at this point?  I'm all ears, and Android is looking better and better during my next upgrade.

  Happy to report that I finally found a position that has fixed this. Someone has to give Community contributor turingtest2 a price, they had an incredible post in communities that have corrected my problem.  See below for the excellent suggestions.

  iOS device do not show in iTunes for Windows

  iOS device do not show in iTunes for Windows

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2

• After upgrading to itunes 12.5.2.1 my iphone is not recognized as a device in itunes

  After that I upgraded to itunes 12.5.2.1 and IOS 10 September 14 my 6s iphone is not recognized as a device if I sync my PC with Windows 10 on it.

  Help, please.

  Any body else with the same problem?

• My program iTunes windows is not recognizing my iPhone more than 6 s

  I have installed ios 10 but my iPhone 6 s more is stuck in recovery mode and my iTunes account is not recognizing the device to complete the update or restore.

  The first thing to do is to make sure you are using iTunes 12.5.1, like this version, released on September 13, 2016, are the first to recognize and prepare for iOS 10 version.

  Next:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support