Hearing "Audio Engine" affects the record?

Similar Questions

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Microphone is not record audio (my voice) during the recording of videos!

  So, today I went to check on some of my video files to modify and at their reading, I heard no noise. I was confused by this because in the past, my microphone was fine and should record audio without a problem. But all of a sudden it stopped working at all, at least for the record there. When I'm in Skype calls, my microphone seems to work because I can be heard. But when I try and save, my microphone is not working. I record with Fraps and tried a lot of different options within the system itself. I tried "His file Win7" stereo and surround, and two of them did not work. I even went to Skype call testing service to see if my microphone still worked, and when it reproduces the audio I could hear myself using the microphone. Please help me because I don't know what the problem is!

  Edit: Forgot to say that I tried to record with no microphone but the eternal mic and I have all his be picked up when recording, but when I tested it with Skype, I could hear audio.

  Re Edit: So I tried later and tested with my microphone and could not hear any audio, but when I used the computer's microphone, I could hear audio! So that leads me to believe that my mic is broken, but I can't be sure.

  Hello

  First I want to apologize for the delay in responding.

  Here, in this scenario, this could be a problem with the hardware or driver issues. I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooter audio recording and check if the problem persists. See the following article to run the troubleshooter in Microsoft Help.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Method 2:

  Try to install the latest audio drivers, including drivers for the chipset and check if it works for you.

  See the following Microsoft Help article to update the drivers for hardware that does not work correctly.

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  If the problem persists, then it would be best to contact the manufacturer of equipment computer for more help on this issue.

  Please reply with the status of the issue so that we can better help you.

• Can't hear audio of recorded files OBS!

  so, I recently installed first CC pro, then I recorded a video, but when I come to change it I noticed that I could hear anything! I can hear audio normally when I open it with windows media player, I can also hear audio on my old (Vegas Pro) editing software but I just can't hear on the body, when I import something as bars and tone, I can hear normally, so the problem is with the specific clip, its a x 264 .mp4 file (I installed quicktime and also Xvid codec too) I recorded with OBS Another problem that happened is on OBS Studio, I used 2 tracks, one for my microphone and another for his Windows so I could put the microphone that is higher than the volume of game but the body cannot detect the 2 tracks, it seems that a blank audio track, VIDEO works normally, I see it perfectly! I hear no audio! Please help I don't want to record and 1.4 new video time!

  A better way or to upgrade to 2015 CC, or by using the hand brake, the CC 2015 update is faster if im going with it

• Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

  Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

  Monitoring is done through your audio device, no hearing. When you updated your PC, playback of the audio device settings would have been reset. One of them includes the follow-up of the input jack, and that's what you need to restore. Since we do not know which audio device you use, it's all that we can tell you, except that if it is a device internal, you will need to open the volume control options and he change it. It depends on the good OS versions...

• where are the audio files stored during recording as a project?

  Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

  They are stored in their own folder in the project folder:

  

  So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

• Cannot record audio wave on the Satellite A100-PSAA9

  Why I can't record Real Audio Conference with the RealTec driver provided on my A100 Toschiba in time?
  Options records data just, 'micro-Line In-CD' but vague is missing, why?

  I have another laptop from Asus with RealTec driver and he is it possible, on my Toshiba not, why?

  Hello

  Please read the solution in this tread - it will solve your problem.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16446

  Sincerely
  Cornelius

• The range of process buffers affect the audio quality?

  I came across some problems of overload on Logic Pro X and I was suggested to increase "Process buffer range" to "Large" to reduce the errors of overload. My question was whether this parameter will affect my audio quality. Thank you!

  -Macbook Pro w / Retina display (mid-2014 - 128 GB), OSX El Capitan.

  

  It can affect the latency and should not affect the audio quality.

• Audio Studio LE-how adjust the recording settings

  Help to install a SONY USB turntable

  Hi all -

  I just got a SONY USB turntable and hooked up with the software (Audio Studio THE), when I recorded it, I picked up a lot of other noise that has mastered the music from the disc.  How can I set my system so that it captures only the record music and not the environmental music?  Thanks in advance

  Laurent of Norwalk

  Hi Laurent,.
   
  1. have you installed the device USB stereo turntable with success?
   
  There might be some recording settings in the Audio Studio software THE. We recommend that you cross check if all unwanted settings are applied that captures the external sound and change accordingly.
   
  See Install a USB device
   
  See Audio recording in sound recorder: frequently asked questions
  You can also contact the Team Sony
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Why not to record my audio changes of the original item

  I have several clips in first pro I want to change in hearing. After applying my favorite preset to one of them and save, I went back to preview to see that he has created ANOTHER audio file just for that I changed the audio connected to the video is completely intact. How can I just change the audio directly from the item, instead of making a new audio file?

  How can I just change the audio directly from the item, instead of making a new audio file?

  You can not.  Premiere Pro is a non-destructive Editor, which means it is play your media files and all changes must be exported outside as a new media file.

  Unfortunately, hearing does not work like that.  It's a destructive Editor, which means that any changes made to your audio files will permanently change the original.  Because of this design (flaw), PP will create copies of your audio files to Audition to work on.

• Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

  I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!

• Hearing audio on the timeline problem

  I can't hear any audio while dragging the red pointer over the timeline in edit mode. Although it is audible after I export the movie. Help!

  It might be a mute point, but I had this problem as well, and I just figured out how to fix it.  In the Properties window of the flash for the change of the audio file the event to the stream synchronization parameter.  This will ensure that audio plays while you scrub through the timeline.

• Audio synchronization is disabled at the end of the records

  Hello

  I have a few tapes. Format AVI which were made earlier this year. The files were made using a black magic capture card and their recording Media Express program.  These recordings are about 2-3 hours long.

  I discovered that although the audio is synchronized at the beginning of the records, it is disabled by as much as 1 to 2 seconds before the end of the recording.

  Is there a way to first Elements 8 to correct the audio so that it is correctly synchronized during the registration?

  Thank you!

  Welcome to the forum.

  Unfortunately, you have filed for the subforum tips & tricks, which is a repository for tips on how to do things in the meadow. Our MOD, Steve, will probably pass this point on the main forum, so that several users can see and respond.

  Now, in regards to the AVI, which term is simply a wrapper, and it's what's inside that really matters. This ARTICLE will give you general information.

  It is likely that the CODEC of the BM is originally the derivative of synchronization. Dynamic correction of OOS is a little more difficult, that static OOS, but this ARTICLE will return you though the process.

  Good luck

  Hunt

• Search engine box change also affects the default search engine in the URL bar

  I've just updated to 23.0, and for some reason, change the search engine in the search box also changes the default search engine in the URL bar as well. I don't know if it's intended functionality (I hope that's not), but it is a bit irritating. I didn't know if it was related to an add-on that I installed it at the same time, so I tried to turn that off, but the problem was still there. so I tentatively guess it has to do with 23.0.

  Hello, yes it is (unfortunately) the new behavior in firefox 23 and upward and was introduced to solve the problem that several tools/adware toolbars are crush keyword.url unbeknownst to users preference...

  See also bug #738818 (please do not post in the bug reports).

  Additional comment, the add-on restartless Keyword Searchcan solve the problem, please see my post /questions/963439? page = 2 #answer-463664 ~ J99