Help! Integrated Broadcom Gigabit Ethernet - M51

Similar Questions

• Broadcom Gigabit Ethernet works on Windows 7, but does not work on Windows 8. (Error code 10)

  Hello!

  I telled main things in the title.

  Things I've done:

  Checked device Maneger, code 10 error.

  Downloaded the driver and paste the .sys file in the system32\drivers. Same thing. After I removed it, but the same thing happens.

  I wanted to install the latest driver, error code 10.

  What is the problem?

  Hello

  Thanks for posting your query in the forums of Windows.

  I understand that you have found the error code 10 on the computer. We're really sorry for the inconvenience caused to you. We will help you solve the problem.

  A Code 10 error is generated in the Device Manager in one of the following situations:

  • Device Manager cannot start the device.
  • One of the pilots who needs the unit does not start.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Which is exactly the model of the Ethernet card?

  Given that the unit was working fine with Windows 7, you might face this problem because the device driver is not compatible with Windows 8. I advise you to download the latest driver from Broadcom site and then try installing the driver in compatibility mode.

  You can follow the link given below to install the driver in compatibility mode.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Make the programs more compatible with this version of Windows
  

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Broadcom netxtreme 57xx gigabit ethernet is not supported to install esx 3.5

  Hello

  I use my laptop Dell E5420 workstation 6. When I try to install esx 3.5 in my computer, it's show error message as port of networking is not supported. Then I tried to install esxi 3.5 in the same system. His installation, but I have not found all of the network adapters. Physical system I have broadcom netxtreme 57xx gigabit ethernet. I changed little in vmx file, but not all.

  Please help me

  I hope that you use WS 6.5?
  you will miss at least the line

  ethernet0.virtualDev = "e1000".

  Take a look at this vmx - worked in nice on Workstation 6.5

  config.version = '8 '.
  displayName = "esx35i."
  ethernet0. Present = 'TRUE '.
  ethernet0.virtualdev = "e1000".
  Ethernet1. Present = 'TRUE '.
  Ethernet1.virtualdev = "e1000".
  floppy0. Present = "FALSE".
  guestOS = 'other '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-image".
  IDE1:0. FileName = 'VMware-VMvisor-InstallerCD - 3.5.0 - 82664.i386.iso.
  IDE1:0. Present = 'TRUE '.
  memsize = "1024".
  Monitor.virtual_exec = "hardware".
  monitor_control.restrict_backdoor = 'true '.
  numvcpus = '1 '.
  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  scsi0:0. FileName = "esx35i - system.vmdk".
  scsi0:0. Present = 'TRUE '.
  Sound.Present = "FALSE".
  virtualHW.version = "6".

• I run xp coffeehouse get an icon remove the device safely. I check it and it is for a card broadcom netlink gigabit ethernet which can not be deleted

  I run xp family on a computer laptop hp compaq 6510 b.  The broadcom netlink gigabit ethernet adapter is part of my motherboard.  Why do it and can I get rid of him?

  Hello

  1 have had any changes made to the computer before the show?

  Restore the system to the date and time when the computer was working fine.

  http://support.Microsoft.com/kb/306084

  If this message has always been to present its likely that the Ethernet card that is built into the computer is connected to the motherboard using a USB connection (this is common in laptops). If this is the case, there is nothing that can be done to remove the message that the deactivation of the Ethernet card, but this will prevent you from being able to use wired Internet/network connections.

• Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet

  Hi all

  Just bought a HP Z800 of high-spec workstation I use in my lab at home and I need VIB/drivers for the on-board "Broadcom Corporation NetXtreme BCM5764M Gigabit Ethernet to."

  The works of bare metal installation install fine, but any nested ESXi hosts without any NIC - someone has used before and have a link to where I can download the VIB?

  I'll probably get in on a second hand Intel NIC to work around this problem, but it would be great if someone has already done this and has any tips.

  Thank you

  Jon

  OK, I solved this... and my boy I feel like a "retarded". It turns out that in my haste to deploy virtual computer, I only gave 2 GB RAM... as soon as I expand this to 8 GB, it works perfectly.

  Here is the virtual machine with 2 GB;

  

  And now with 8 GB;

  

• My PXE / ESXi autodeploy is unable to see my cards network Broadcom NetXtreme II 10 Gigabit Ethernet (BCM57810).

  My PXE / ESXi autodeploy is unable to see my cards network Broadcom NetXtreme II 10 Gigabit Ethernet (BCM57810).
  

  
  

  What I'm missing here?

  
  

  # Extract the bundle off the downloaded zip line and place it in C:\AutoDeploy

  Add-EsxSoftwareDepot - DepotUrl C:\AutoDeploy-VIBS\BCM-NetXtremeII-11.0-offline_bundle-1553810.zip - net-bnx2x name | Sort descending creationdate | Select creationdate, Version, StatelessReady, summary

  CreationDate Version StatelessReady summary

  ------------                          -------                                                     -------------- -------

  21/01/2014-07:10:23 1.78.79.v50.2 - true 1OEM.500.0.0.472560 bnx2x: driver for VMware ESX

  08-02-2012 03:00:42 1.61.15.v50.3 - 1vmw.510.0.0.799733 true bnx2x: driver for VMware ESX

  # Add the driver (use force because complains and fails otherwise)

  Add-EsxSoftwarePackage - ImageProfile "Profile001" - SoftwarePackage net-bnx2x-force

  # Check it is there

  Get-EsxImageProfile "Profile001" | Select viblist - ExpandProperty | where {$_.} Name - like "net-bnx2x"} | FT-auto

  Date created Version of the vendor name

  ----      -------                           ------   -------------

  Broadcom 1.78.79.v50.2 - 1OEM.500.0.0.472560 net-bnx2x 21/01/2014 07:10:23

  # Export

  Export-EsxImageProfile - ImageProfile "Profile001" - ExportToBundle - FilePath "C:\Users\Administrator\Desktop\ESX-Software-Depot\Profile001.zip".

  WARNING: The image profile is not validated.  ISO / offline Bundle will always be generated, but may contain errors and may

  functional.  Errors:

  WARNING: Requires the VIB Broadcom_bootbank_net - bnx2x_1.78.79.v50.2 - 1OEM.500.0.0.472560 com.broadcom.cnic_register - 9.2.0.0, but

  be satisfied within the ImageProfile. However, the VIb (s) Broadcom_bootbank_misc-cnic - register_1.78.75.v50.1 - 1OEM.500.

  can meet this requirement.

  > # Confirm ESXi image name

  > Get - EsxImageProfile - name Profile001 | ft - auto

  Vendor name has changed the level of acceptance

  ----       ------ -------------        ----------------

  VMware Profile001 27/02/2014 PartnerSupported 18:44:45

  >

  > # Net-bnx2x Confirm is a software installed

  >  Get-EsxImageProfile "Profile001" | Select viblist - ExpandProperty | where {$_.} Name - like "net-bnx2x"} | FT-auto

  Date created Version of the vendor name

  ----      -------                           ------   -------------

  Broadcom 1.78.79.v50.2 - 1OEM.500.0.0.472560 net-bnx2x 21/01/2014 07:10:23

  >

  > # Confirm the current rule of deployment deploys profile001

  > Get-DeployRule-name *

  Name: DefaultBoot

  PatternList:

  ItemList: {Profile001, cell01}

  If you put all the VIB - names in a single order, separated by commas, then it works fine

  Add-EsxSoftwarePackage - ImageProfile - misc-cnic-register,net-cnic,net-bnx2x,scsi-bnx2i,net-bnx2 SoftwarePackage

• HP ML350P g8 have only 100 MB connection on Broadcom BCM5719 Gigabit Ethernet Esxi 5.5

  Hello

  I have HP ML350P g8 that has recently settled with Esxi 5.5, but I have 100 MB of connection on BCM5719 Gigabit Ethernet of Broadcom that are connected with Gigabit HP switch.

  Tried to restart the server, but no luck. any idea. It seems that the driver has been installed with custom HP Esxi ISO. See the photos

  Any idea? Thank you.

  Just decide that, have you already checked the switch physical configuration of the port and the cable network?

  André

• Help: Gigabit Ethernet on Pavilion a6120n

  Hello

  I have a HP Pavilion a6120n running Windows Vista SP2, bought two years ago. It has an Intel PRO/100 VE network adapter. This means - it does not support gigabit ethernet?

  I ask this because I recently bought a wireless Netgear WNR3500 router that supports gigabit ethernet. According to the HP website, my computer is doing as well. But now, I'm not sure, because for some reason any my network will only operate at 100 Mbps.

  Thank you

  Yes it means that your computer supports 100 Mbps and 1 Gbps. You can check this link

  http://support.HP.com/us-en/document/c01048279

  Check under the heading network (LAN)

  How ever you can upgrade your network card buy a PCI Gigabit card.

• Cannot configure embedded card Gigabit Ethernet...

  Hello

  I am using Bootcamp 2.x with 10.6.x on a 2011 end pro macbook.

  Is Windows XP SP3

  I want (I need) using the integrated Ethernet Gigabit 10/100/1000 BASE-T, but cannot configure it!

  My Broadcom 802.11n wireless card is in place and works fine

  Documentation of the specifications Apple says:

  • Gigabit built-in 10/100/1000BASE-T Ethernet (RJ-45 connector)

  When I ran PC-Wizard, he told me:

  Network card:

  BCM57765 of Broadcom NetXtreme Gigabit Ethernet PCIe

  If I go to computer management program and open the list of Device Manager

  Card Ethernet is not visible in the list of network... and control has a ethernet cards? icon...

  How to proceed with the installation?

  Any advice?

  Thanks in advance

  You have the DVD with drivers?

  See also install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .

• Maid in Gigabit Ethernet Adapter

  Hello

  I bought a bolt of lightning for gigabit ethernet card.

  Could someone give me a pointer in the implementation to connect to the Internet using this? Can't seem to get it to connect.

  I use a MacBook Pro el capitan

  Thank you very much

  If the Ethernet on your Mac has stopped working recently - Apple supports

  This might help

• Thunderbolt to Gigabit Ethernet adapter not working

  Hello

  I'm new to this community has never had a problem on my mac since I had last year.  MacBook Pro retina mi 2014 running El captain.

  My ethernet is not picking up DHCP and thunderbolt ethernet does not appear in the network interface.

  I use also fell in love with VGA Converter works on the two test port.

  I also reset the PRAM and the MSC still nothing.  Also restored some peripheral preference to another forum I found on the internet.

  I created another account from administrator to test to see if the interface resumes, still nothing.  How ever wifi works without problem

  Thanks in advance if anyone could help with my problem.

  Dump of information systems presents its collection as below.

  Bolt of lightning to Gigabit Ethernet Adapter:

  Name of seller: Apple Inc..

  Device name: Thunderbolt to Gigabit Ethernet Adapter

  Vendor ID: 0 x 1

  Device ID: 0 x 8003

  Revision of the device: 0x1

  UID: 0X0001000203A8FCF0

  Apple serial number: DTN450706APDWKHBZ

  Route of chain: 1

  Firmware Version: 5.5

  Port (upstream):

  Status: Connected device

  Link status: 0x2

  Speed: up to 10 Gb/s x 1

  Port Micro Firmware Version: 0.0.8

  I have this problem as well. My crush to the ethernet adapter was working yesterday, but now I have not been able to run all day. I even tried everything said in this thread: ImtiazThunderbolt Ethernet does not work after upgrade to Yosemite , you should try what is in the thread, as it has worked for some people.

• Gigabit Ethernet through AirPort Extreme

  I just got a gigabit home connection. If I connect my iMac via ethernet to gigabit municipal internet provider modem, II can get about 800 Mbps download based on the file netspeed.com. Nice.

  However, when I use my Airport Extreme as a router ethernet (put the extreme between the iMac and the modem) my speed drops to about 1/10 of that.

  None of the devices that I currently own are capable of handling 802.11 ac, so I know I could not anywhere near gigabit wireless speeds. But it would be nice to have the fastest speeds on the one machine I intend to connect via ethernet, then connecy to the extreme wireless.

  Airport Extreme really limit the ethernet so? Is there a setting I can adjust for more fast ethernet routing?

  If the AirPort Extreme 802.11ac is configured as a DHCP and NAT router, then the WAN to LAN speed will be limited to about 300-400 Mbps.  Check the results here:

  http://www.SmallNetBuilder.com/tools/charts/router/view

  If the AirPort Extreme is configured in Bridge Mode, then you would expect to see 600 - 700 MB/s speed this way.

  http://www.SmallNetBuilder.com/tools/charts/router/bar/75-LAN-to-Wan

  If you don't see results, then the AirPort Extreme is not to negotiate properly with your modem speeds.  Unfortunately, Apple has removed all the settings to manually adjust WAN port on the AirPort Extreme 802.11ac speed, so there is not much you can do others try a few unusual things...

  One of them would be to insert a Gigabit Ethernet switch between modem and AirPort Extreme to see if it will negotiate better speeds like that

  Another would be to try an Ethernet cable between the modem and AirPort Extreme cross.

  If none of these things help, then you should ask Apple to replace the AirPort Extreme to you and hope for more luck in the next test.

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• Availability of Bluetooth and Gigabit Ethernet?

  I am looking to buy the Pavilion 17-e105sa or 17-e153sa. They have Bluetooth and/or gigabit ethernet connections?

  Thank you

  babyboomer49 wrote:

  I am looking to buy the Pavilion 17-e105sa or 17-e153sa. They have Bluetooth and/or gigabit ethernet connections?

  Thank you

  Hello

  These laptops look pretty same. However, the specifications indicate only 100 Mbps, ethernet card (integrated 10/100 BASE - T Ethernet LAN) and a chip to only b/g/n wifi (802.11b/g/n (1 x 1)). Good news is that you can get the 7260AC from Intel which is a wireless wifi/bluetooth combo card but the ethernet card is probably only fast ethernet card.

• U350 - Broadcom Gigabit does not

  Hello.

  I got my U350 today and I'm very happy with it so far. Look great and performs well. But it came preloaded with Vista - which I threw and installed Windows 7 Ultimate instead. Everything works fine - except for Ethernet (Broadcom Gigabit). I tried all the drivers out there, but this yellow question mark in Device Manager will not go away. I also tried Lenovos "driver agent" - but he gave me this message:

  After detection, we found that the following device drivers have a problem, but there is no version available at this time repair, you can leave your comments during the investigation.

  Any ideas?

  I found one that worked in the end: http://www.broadcom.com/docs/driver_download/570x/k57_vista_2k8_32-12.2.2.2.zip

  This driver is 139 KB - and it works. Pilots (packets) offers Lenovo are between 40-120MB - and they do not work.