Help license SSL Info failover ASA 8.2 8.3

Similar Questions

• ASA 5500 SSL VPN Failover license

  Hello

  I have a partner who request assistance with SSL VPN licenses on the ASA 5500 firewall sharing:

  His question is:

  Both SSL, provided with the firewall of the SAA, licenses can be shared across a couple active / standby?  I would therefore have a total of (4) licenses of SSL VPN to use?

  This would also be true for two security contexts that are included with the firewall?

  For example, I buy two base ASA 5520 firewall, running active / standby, that each machine is supplied with SSL VPN licenses (2) and (2) licensing of security contexts? In version 8.3, the licenses are cumulative by failover pairs, so I should a total SSL VPN (4) and (4) security contexts?

  Here is my response to his request:

  Based on this link (http://www.cisco.com/en/US/partner/docs/security/asa/asa83/license_standalone/license_management/license.html#wp1449664)

  It was mentioned that:

  "You can have one active license type, either the AnyConnect Essentials license or the AnyConnect Premium license. By default, the Adaptive security apparatus includes an AnyConnect Premium license for 2 sessions. If you install the AnyConnect Essentials license, it is used by default. See not anyconnect-essentials control or in ASDM Configuration > remote access VPN > network (Client) access > advanced > component AnyConnect Essentials to activate the Premium license instead. »

  It will be able to share the included license on the ASA 5500 4. It will be able to share these licenses, but I'm not sure the security context. My answer would be, it can use only 2 context Security licenses since only the VPN licenses are shared on the version 8.3 and other licenses not characteristic. My understanding is correct? or there are other explanations on my customer survey?

  Thanks in advance!

  Ice Flancia

  Cisco partner Helpline Tier 2 team

  Only from ASA 8.3 version and following, the license can be combined on a failover pair active / standby.

  2 SSL included license on SAA in failover pair is combined as 4 license SSL.

  2 license of background on ASA in failover pair is combined as license frame 4.

  Here's the URL on ASA combined license failover:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa83/license_standalone/license_management/license.html#wp1450094

  Hope that helps.

• licenses for a cisco ASA active/passive pair AnyConnect SSL

  Hi all. I buy 2 5512 x ASAs is configured like a pair of active/passive as a VPN device. I need to purchase licenses for both devices anyconnect? Thank you

  Licenses AnyConnect Essentials (or premium) are combined on a cluster failover ASA. Reference

  So, buy once only the quantity and type of licenses you need based on your end users - not based on the number of ASAs - and they will be available at the ASA Active whether primary or secondary unit.

• SSL VPN failover

  Hello

  I have a SSL VPN 500 license running device. I also have a beam of 5520 firewall only. Can I use the firewall as a failover cluster (active / active OR active / standby) to the current 5520 with 500 licenses SSL?

  If this is not the case, what is necessary to have a failover for 5520 with 500 appliance SSL?

  Thank you

  Wine

  If you run version 8.2 and earlier, then you must have the 500 user license of SSL enabled on the new ASA5520 to perform failover.

  The two needs of ASA to have exactly the same material, the module, the license to run the failover if they perform version 8.2 and earlier versions.

  However, if you are using version 8.3 and later, there is no need to have the 500 user license of SSL enabled on the new ASA5520. You can configure failover immediately.

  Hope that answers your question.

• Customization of SSL VPN Cisco ASA version 8

  Is there a way to customize the appearance of the SSL VPN? To change the features of the ASA custmization? To change the total look of the portal page the way we like it and not the Cisco default settings? For example, the RDP plugin has always display the help text on the right side, and we would like to show different text in this area. We were able to change it but could not import to the area of the asa.

  Import of SSL vpn customization ASA is not possible. Impossible also to change the appearance of the portal page.

• Is it possible to withdraw a license installed previously on ASA?

  Hi all

  I am currently reconfigure a HA Setup with a second 5510 ASA5510 installation.

  The old 5510 has a license 'AnyConnect for Mobile' which is not used. If we improve this SecPlus license to allow failover posibilities and we bought a new 5510 also with SecPlus license. When I try to activate the failover, I get the message that my companion did not license «AnyConnect for Mobile»

  I know for failover, both devices must be exactly the same (at first I thougth that the AnyConnect license would be lost when SecPlus). So now I'm wondering and seeking solutions remove the AnyConnect license (because we do not use it).

  Anyone got a clue?

  Regards and thanks in advance for your efforts!

  Daniel Lange

  The only thing you could do is remove the activation key and a key that does not allow the Anyconnect.

  Not sure if you can get a licence, but you can try.

  PK

• IP phone SSL VPN by ASA

  IM in the middle of configuring Ip Phone SSL VPN by ASA, is stuck on authentication... When I enter the user name and password on the phone screen, I get the message "username and password failed" on the screen. However, in the newspapers of the ASA, I see the following line

  February 16, 2011 15:12:57 725002 85.132.43.67 device 52684 complete SSL negotiation with customer vpn:85.132.*.*/52684

  February 16, 2011 15:17:26 725007 85.132.43.67 52745 SSL session with client vpn:85.132.*.*/52745 is complete.

  What it means?  How can I turn on debugging to see what is happening?

  Thank you in advance!

  Hello

  If you do not use certificates in the client authentication then the SSL handshake full until the user is prompted to authenticate with the username user and password.  If that fails authentication request, you will see the terminated SSL session immediately after this failure (as in newspapers you provided).  Note 5 seconds between the end and the SSL session establishment, it is more likely when the user is authenticated with the aaa server.  If the phone is an authentication against an external aaa server failure you'll want to investigate the logs on the server to determine the cause of the failure.  The ASA can also provide confirmation of the request for authentication/reject with the command 'display aaa-server '.  If you want to see what happens at a level of authentication protocol you can activate many debugs including "debug aaa authentication | common | internal ' and debugs specific protocol such as ' debug RADIUS user. session | all ' or 'ldap debug ".

  This has answered your question? If so, please indicate it answered!

• IKEv2 VPN without using licensed SSL? (ASA-5512)

  Hi all

  I enabled Cisco 'Anyconnect Premium peers' for customer less connections vpn ssl, the obvious snag is that for Anyconnect ikev2 sessions he wants to use the SSL license pool instead of the IPSEC pool (which I have a lot of connection for 'peers VPN Total: 250' licenses.

  * Is it possible to configure Anyconnect to connect through IPSEC and use licensed IPSEC (while keeping Premium Anyconnect active peers)?

  * Should I consider 3rd third-party vpn outside Anyconnect clients?

  CyA

  Craig

  Remote access to sessions with IKEv2 will always consume a Premium license. Change for another customer will not help unless you change to a customer that uses the legacy technology with EasyVPN. But this should not be the solution.

  If you enable AnyConnect Essentials, you can use AnyConnect with IPSec the platform limit, but you cannot use the features award (as a clientless) more at the same time.

  In a situation like that where many AnyConnect-Sessions are necessary and only a couple of sessions without client, I installed AnyConnectEssentials on the ASA principal and deployed an another ASA only for VPN without client. Due to the high cost of premium VPN licenses, is much cheaper then buying the Premium licenses for all VPN users.

  Sent by Cisco Support technique iPad App

• AnyConnect user more perpetual license can share several ASA?

  Dear all my friend.

  Need help :)

  If I order ' Cisco AnyConnect 50 user more perpetual license ", SKU 'AC-PLS-P-50-S '.

  Can I use this 15 license in ASA, ASA B 15 users and 30 users in ASA C?

  is this similar with license for Collaboration, got PAK, and we can use partial licenses to any machine?

  You can use it in several ASAs. However the total number of unique users must not exceed the number of licenses.

  Your example request 15 + 15 + 30 = 60. 60 > 50 so you'd be in violation of the license.

• LICENSE of BOTNET in ASA

  One of MY customer wants to upgrade their 5 qnty of ASA-5000 X series firwall with firepower.

  and they also wants to license BOTNET.

  My question is, is it mandatory (BOTNET) when you upgrade to ASA - fire power?

  Coz, we also take AMP, STROKE.

  and I was informed that the BOTNET is included in AMP power lic of fire.

  My question is, is it mandatory (BOTNET) when you upgrade to ASA - fire power?

  The subscription of BOTNET is separate and is not required for the upgrade of firepower. In addition, if the customer will get subscription fire power amp, then I would say that the subscription of inherited BOTNET would be unnecessary.

  I hope this helps!

  Thank you for evaluating useful messages!

• Wildcard SSL cert on ASA

  Is it possible to use a wildcard on a SAA SSL certificate? In other words, instead of getting a specific cert with the FQDN of the ASA, we would use the emitted wildcard cert?

  Absolutely, it is particularly necessary in environments of ASA vpn load balancing. When you connect to a FULL domain name which translates an IP load balancing, one of the ASAs will make a http redirect to its individual host name, your browser (or AnyConnect) will attempt this connection and ASA must have a certificate for this specific host name. Have a certificate wildcard on all the ASAs solves this. I've got this running on several clients.

  If you need help with setting up, let me know.

  You can generate keys private on the SAA (and later export it to another ASA or other devices other than cisco), or you can import a certificate with existing wildcard characters with the private keys (to the PKCS12-BASE64 format)

  Kind regards

  Roman

• License of IPSec Cisco ASA

  Dear all,

  I want to know how much maximum IPSec connection allowed in my Cisco ASA 5505.

  I want to try VPN L2TP Mac and PC

  TQ

  The devices allowed for this platform:
  The maximum physical Interfaces: 8 perpetual
  VLAN: 20 unrestricted DMZ
  Double ISP: Activated perpetual
  VLAN Trunk Ports: 8 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active / standby perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  AnyConnect Premium peer: 25 perpetual
  AnyConnect Essentials: 25 perpetual
  Counterparts in other VPNS: 25 perpetual
  Total VPN counterparts: 25 perpetual
  Shared license: activated perpetual
  AnyConnect for Mobile: activated perpetual
  AnyConnect VPN phone Cisco: activated perpetual
  Assessment of Advanced endpoint: activated perpetual
  Proxy UC phone sessions: 24 perpetual
  Proxy total UC sessions: 24 perpetual
  Botnet traffic filter: activated perpetual
  Intercompany Media Engine: Disabled perpetual
  Cluster: Disabled perpetual

  With this device you can have 25 concurrent VPN sessions, regardless of the type.

• New for mapping SSL VPN ACS ASA - ASA groups

  Greetings,

  I am new to ASA, so any help is greatly appreciated.

  I just installed and installed an ASA 5520. I installed an SSL VPN. What I'm trying to achieve is to configure profiles of different groups and different users can access various resources when they access the VPN.

  Current config-

  ASA 5520 v8.3

  ACS 4.0

  Field of Windwos 2003

  I have different installation profiles in the ASA. (i.e. business Dept.) When I choose in the drop down menu, it allows me to open a session and displays the options I've chosen for this group. The problem is that I can connect in this group with any account. GBA, all windows domain users are in the default group. I guess the default group is being processed and which has hosted and user logon.

  Can anyone provide a good article or tips on how to configure the ASA and the ACS for several groups of users. We have several departments that will have to get the parameters when they connect. The ACS groups are mapped to the Windows groups that correspond to each Department

  Any help is greatly appreciated.

  Thank you

  Tim

  Hello

  I think that you need to activate locking group.

  In order to configure Group locking, send group policy name in the attribute class 25 on the Authentication Dial - In User Service (RADIUS Remote) server and choose the group to lock the user in policy.  For example, to lock the user 123 of Cisco in the RemoteGroup group, define the class of attributes 25 Internet Engineering Task Force (IETF) UO = RemotePolicy; for this user on the RADIUS server.

• SSL VPN on ASA-

  Everyone,

  I went up to a SSL VPN router and now migrate to ASA firewall and was looking for a doc that documents the installation using the ASDM or CLI.

  Thanks for your help.

  Sheldon.

  These should contribute.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808efbd2.shtml

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml

• Upgrade L-ASA-SSL-10 L-ASA-SSL-50

  Hi all

  Does anyone know if it is possible to upgrade a L-ASA-SSL-10 for a L-ASA-SSL-50?
  Or is the only way to move to 50 users with upgrade licenses?
  L-ASA-SSL-10-25, then L-ASA-SSL-25-50?

  Thanks in advance,

  Kind regards

  Lemar Biekman

  I'm sure that one of my colleagues did some time ago. If I remember correctly, he wrote to [email protected] / * / and asked a new activation without the unwanted feature key. After you apply this key, the new license could be applied.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni