Help! Mode screen is permanently stuck like white.

Similar Questions

• Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns

  Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns and laptop computer must be restarted to restore functionality
  The center of the causes of "touchpad button" toggle switch by pressing the touchpad pointer to enter a random State like two fingers to zoom.

  Sometimes, he'll be back to normal, but most of the time the computer should be put to sleep or restarted to restore functionality.

  a. I tried turn off all touch pad feature one item at a time and all, he still has some weird random State.
  (Did not try the impossible combination need $ to be interested but went to the 90% level)

  b. I tried disable the touch pad buttons offending and only using the mode tap the buttons and the problem still persist.

  c. Finally, tried bending the entire keyboard instead of pressing the buttons and it has also created the problem.

  This leads me to believe either the power key or flexion of the entire keyboard is originally is

  a. flexion of the touch pad causing the driver getting into a crazy State or require a recalibration.

  b. electrical connections causing the driver enter a crazy State or require a recalibration of bending.

  Note: I have reinstall the latest version of the driver.
  Also: American Toshiba support site that this problem exists in the notebooks of May.

  Also: The touchpad is too sensitive, which makes it very unusable!

  CAry

  Have you tried to install the operating system and check the functionality of the touchpad with the factory settings?
  Recovery image contains tested the touchpad and right and I don't think that helps the driver installation.

• Satellite L300D: black screen during boot - stuck on classpnp.sys & repair

  Hi I have 3 year old Toshiba L300D.
  1 year back I upgraded vista to windows 7 Home premium.

  3 days back I had problem - my windows start page was hanged and was not forward, also all types of safe mode was stuck on classpnp.sys.

  After reading many forums, I started with USB (with windows 7) and use command prompt and all 'pcmcia' realted deleted files from drive C. Now using function F8

  I can't use any option (all the safe mode option, low resolution, restarting, etc. doesn't work, even in the Bios configuration changes will not work). Also now start my PC with USB, after the start of the windows black screen page appears with the white arrow and it will not go further this black screen so I can't even use now guest & installation option.

  Now, I don't know what to do :(
  Any help will be appreciated :)

  Hello

  The classpnp.sys seems to belong to «service Plug & Play of Windows 7»
  Connect USB devices to the laptop?
  Try to start the unit without the connected USB devices.

  In the worst case, you have to reinstall the OS using the recovery disk if F8 and all other Repair Options would not work.
  But in my view inevitable painful s

• iPhone 6 my screen is all black with white lightning

  The screen is all black with white flashes when I turn it on. Is it a broken screen / digitizer or would it be a hardware problem? This also happened to me a months I did a factory reset. The screen flickered a few minutes after, but was wrong after that until now. Tried to do the same thing again with no luck.

  I suspect a hardware problem. But try:

  -iOS: do not respond or does not light

  https://support.Apple.com/en-us/HT201412

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  https://geekindisguise.WordPress.com/2009/07/16/how-to-put-iPod-touch-iPhone-int o - dfu mode.

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  How to make a genius bar appointment? Apple support communities

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• I have a frozen screen of Active recovery of white desk with a mouse. I think that the computer is frozen upward with a problem of recovery? Right?

  I have a frozen screen of Active recovery of white desk with a mouse.  I think that the computer is frozen upward with a problem of recovery? Right?

  How can I fix?

  Hello
  • What were the changes made before the problem occurred?

  You can try to restart the computer and check if it helps.

  If above does not help, you can read the following steps to disable the active desktop on the computer and check:

  a. to disable Active Desktop.
  b. right click on an area empty office, point to Active Desktop, and then click view as Web Page to clear the check box.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ie4_turnon_active_desktop.mspx?mfr=true

• Windows initializes to the Safe Mode screen. Unusable keyboard

  Dell Inspiron E1505, Windows XP Home SP3 Ed.    Computer seemed to have some symptoms that I had not fully diagnosed a blocked key "t".  Trying to diagnose the problem, I wanted to start the computer in "safe" mode  When this screen came, my keyboard was unusable, so I couldn't choose how to start Windows (Safe Mode, Mode safe mode with networking, etc.).  The only thing I can't do is hard power the computer down and start again.  But now it always comes with the selection of Safe Mode screen.  The real problem is that the second 30 countdown clock never starts if Windows never starts.  The ability only I seem to have with the computer now is to push the power button to start and press the button to turn off it, but I get them all in the process is the selection of the Saft Mode screen and nothing else.  Please notify.  Thank you.

  You cannot run windows without keyboard operation. If you think it works, (you can check if see the Num, scroll lock or caps lock lights) you can try to access your BIOS with it. If it works from there, (not too sure what to try out unless you have another keyboard, you can use to install the appropriate drivers for this) you could try to put in your windows CD and try installing 3rd party drivers. There was also an option in the recovery console to select a default keyboard layout. And if you can acess recovery console, you can then change the boot options to make normal startup or the clock is displayed.

  (In the recovery console, first select your windows installation (default is 1) then it prompts for administrator password, if you have not just press on enter, then type help to see the commands and for more information on order type in the command and /?) Ex: boocfg /? and press ENTER. The main controls, you would need is fixboot and bootcfg.

  I hope this helps a little,

  -Alex.

• When I closed my Windows Vista computer, it reached the "Logging Off" screen and seems stuck.

  Sporadically, when I turned off my computer, it reached the "Logging Off" screen and seems stuck.  I walked away from my computer for a returned more than an hour to find the screen always showing "Logging Off" with the small circle in the middle of spinning.  The only way I can close down is to do it manually and then when I use the computer at a later date, I ger the message that my computer has been shut down improperly and I should log in safe mode.  This happened only since I upgraded to Windows Vista.  My computer is a Toshiba laptop Satellite P105-S6147.

  original title: Shutting Down computer

  Hello

  Please, try the suggestions made by the former MVP Malkeleah in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-stuck-at-logging-off-screen-after-trying/d99659e2-03d4-4b18-b3f1-cba3a438f07e

• CC of Photoshop tools stuck like eraser to erase

  Hello

  For some reason, all the tools of photoshop CC are stuck like a gum for me. IM using a Surface Pro 3 Microsoft 8 and my photoshop CC version is up-to-date. All of a sudden, he just started fading for all tools, when I opened it. Ive tried to restart photoshop and allows to turn the computer on again and nothing. It was working fine, then it started out of no where. I can't use ALL the tools but the gum. Any advice or help would be greatly appreciated!

  Thanks for the suggestion, I'm set! I so try disconnection of the pen, but that has not worked. For some reason, I tried to push the button at the bottom of the pen (closest to the tip) and it fixed the problem, my tools are now working normally! Thanks for the tip, never thought it was the pen!

• A bad start ios IPAD Landscape Mode screen orientation

  Dear developers, I hope that someone has encountered the same problem I have and has a solution.  When the application opens, initially, I get the correct start in landscape mode screen showing upwards, but then a split second later, it seems that the same splash screen is rotated 90 degrees and appears distorted in portrait mode.  The application was designed for the landscape mode ONLY and apart from this problem, works perfectly well.

  I created a single app for IPAD.  I use cs6.  I use the latest version of AIR 16.0.0.250.  I created a file ipa ADHOC with the following publication

  Landscape format

  Fullscreen is checked

  Auto orientation checked

  Make the Mode: GPU

  Resolution: Standard, although I had the same problem with HIGH resolution

  Files included

  Default - Landscape.png

  [email protected]

  I have created several applications in the past with different versions of AIR and have never had this problem.

  Thanks for any help/hint, you can provide.

  Justin

  I logged this bug yesterday. You could go and vote or add notes:

  Bug #3915279 - launch image twitches from landscape to portrait

  For now, use build 222.

• want to office 750-124: hang a screen on a desk like 750-124 don't see any vga or dvi connection?

  hang a screen on a desk like 750-124 don't see any vga or dvi connection?

  Gbober

  Hello;
  
  Let me welcome you on the HP forums!
  
  The terms of reference I could find for your office indicates that there are two HDMI ports on the back.

  Those who are used to connect a monitor.

  If your monitor doesn't have any HDMI input, then you will need to find an HDMI-DVI or an HDMI adapter / VGA to connect the cable from the monitor to the computer.

  Good luck

• Satellite 1900 305: screen is broken, freezing or white during use.

  Satellite 1900-305 I got now for almost four years has suddenly started having problems with the screen.
  Randomly the screen will freeze, or begin to break apart, what strange colors, or of the strips to the bottom of the screen, or fade slowly completely white. Sometimes when I restart, the screen is blank (no not even the Toshiba Logo) so I have to keep trying to restart as long as the screen starts to work again.
  I would say that this problem would happen in the first 10 minutes of starting up the machine. If it has not arrived within this period, it is fine for the rest of the day until the next time I turn it on.

  This means that the graphics card inside could start to fail?

  Hello

  Well, that's very strange question. Of course, in my opinion could be a malfunction of the graphics card, but also something wrong with the LCD display. But I can't give t you a good answer to this problem. In this case, the best way is to request the service of Toshiba for details.

• How doI to return the mode screen landscape? I run vistahome Edition

  Please help my screen went to portrait and I need help to replace for hhhhhhhhhhhhhhhelp of the landscape

  Press Ctrl & Alt keys and use the arrows to rotate back.
   
  According to the graphics card on your computer, these can be alternatives.
   
  Right click on the desktop | Graphics options | Rotation.
   
  Right click on the desktop | Screen resolution | Orientation.

• Download previous versions of Premiere Pro? The most recent one doesn't work on my computer. The screen keeps flashing black and white.

  Download previous versions of Premiere Pro? The most recent one doesn't work on my computer. The screen keeps flashing black and white.

  Hello

  You can see the following link to find out how to download a previous version of creative cloud apps.

  Download and install Adobe Creative Cloud apps

• Thank you, Ned.   I got it to where the program opens behind the Welcome screen.  I would like to get rid of have that arise every time.  This isn't in CS5 - but at least I get the program!

  Thank you, Ned.   I got it to where the program opens behind the Welcome screen.  I would like to get rid of have that arise every time.  This isn't in CS5 - but at least I get the program!

  I have no familiarity with the program to be able to tell what to do.  If it's like other Adobe software, there should be a setting in preferences (assuming that there is an option) that allows you to dictate how the programs opens.

  In the software that I use the most, for example, if you select Edit-> preferences, the Panel that opens has what see you below where you can choose what the program has when it is launched...

  

• Help! My file is stuck inside a group!

  Help! My file is stuck inside an empty group!

  I edited a linked picture by double-clicking the form and image in the toolbar links to edition, but now I can't leave the group to pursue the rest of my paper edition.

  All the rest is washed out! A double click of the canvas does nothing, there is no small "arrow" at the top left, most of the options of the menu of the object is gray...

  I'm totally stuck here!

  Please help with any suggestions! ?

  (using Illustrator CS5)

  Update: I think I solved the problem... my drawing layer had become sort of the base layer to another layer. No idea how - did not deliberately make!

  What that it either - by pulling it until its own layer everything fine.

  Never seen that before but.

  Consider the problem solved.