Help - my ssd is missing 40 GB, after that I tried to install Bootcamp

Similar Questions

• Firefox has becomes slow and unresponsive after that I tried to install the addons (not installed)?

  I recently format my computer and reinstall windows 7, since it was the only way I know of to solve the problem with Firefox (I already had this problem too). I download the latest version of firefox 33.0.2 and install it. This version was super fast. But becomes slow and unresponsive when I tried to install the Add-ons. I visited the official site of firefox and searching for addons, when I tried to install addons, Firefox crashed. Therefore, it has becomes quite slow and cannot restore previous sessions. Even to type my email address, it takes more than 5 minutes and reacts more frequently (after typing each letter).
  I want to know if this is due to some viruses, or this version of firefox is not "stable".

  Hey there,

  We are sorry to hear that Firefox crashes. To better help you, please follow the steps below to provide us with crash IDs to help us learn more about your accident.

  1. Enter Subject: hangs in the Firefox address bar and press ENTER. A list of submitted Crash reports will appear, similar to the one shown below.
  2. Copy the 5 most recent report ID begins with bp - and then back to your forum question but that stick in the box of "Post a response. (Please do not take a screenshot of your plant, just copy and paste the ID image below is just an example of what your Firefox screen should look like)

  

  Once you have done so, you could try the Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  I hope this helps!

  Curtis Parfitt-Ford
  Support for Mozilla

• my dvd is battery and does not open after that I tried to install a program.

  Hello

  I started to install a program on my laptop.

  The installation did not pass. And the cd is stack on the disc and does not open.

  On my computer, it does not see the drive that reports to the Conference on disarmament.

  shows that C; and f:

  Hello Arturomaduro,

  By "stack" I assume you mean that the CD/DVD is 'stuck' in the player and you cannot get the drive to open it? The most important thing right now is to get the DVD from the drive. You have two options.

  1 / restart your PC and press the eject button on the CD/DVD drive to see if the drive open and release the CD/DVD. Normally, this should do the trick.

  2 / if my first option does not release the disc caddy, you will need a large paperclip and bend straight. Take a look at the front of your DVD drive and you should see a small hole. This is usually placed near the eject button. Make sure that your PC is off and you have removed the plug from the socket. Now insert the straigtened paper clip into the hole and the 'push' the draw caddy should now begin to open (or open completely). If it opens only paritally, then gently pull the draw caddy until it opens completely and then remove the CD/DVD. After removing the CD/DVD push the caddy draw lots to close. Be sure to gently push to clear the draw caddy.

  Maybe it's just a unique and the player will operate normally afterwards. If she keeps refusing to eject a CD/DVD, there may be something wrong with the CD/DVD unit itself.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• December 15, 2011 updates to Windows Vista. After that automatic download and install on stop, my computer would not start up

  Original title: 15 December 2011 update of Windows Vista

  After that automatic download and install on stop, my computer wouldn't boot. I had to run Startup Repair 2 days in a row and remove the updates. They are always there to be installed when I stopped. Help, please!

  Hello

  I suggest you to see these steps:

  Step 1:

  I suggest to reset Windows Update components and follow step 2.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  After reset, you will find that Windows 8 or 9 update that must be installed.

  Try to update one by one and check.

• Windows Media Center could not update Playready after that kb3004394 has been installed.

  Windows Media Center could not update Playready after that kb3004394 has been installed.  I then uninstalled kb3004394 and tried everything I can find on the web for difficulty playready including this procedure

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

  and this procedure

  http://www.hydrous.net/weblog/2012/08/20/resetting-PlayReady

  Nothing worked and I'm pulling my hair out.  I use WMC with an HDHomeRun and a map of Time Warner cable.  This facility worked well for more than a year before installing this update.  The machine is a Dell XPS 8300 running windows 7 SP1.   I'm unable to watch all channels protected by DRM and I lost all my legally registered content.  It is a disaster and cost me 30 hours and counting.  Anyone have any ideas?

  I don't know your problem, but 3004394 has caused a lot of problems for a lot of people - https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18.

  Microsoft have apparently released an update of replacement/deletion for it - https://support.microsoft.com/kb/3024777?wa=wsignin1.0

  But to a few other posts on this forum, it seems to fix everything for everybody. If all goes well it can help you.

  If not, allows to see what MS themselves have to say.

• Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens

  Please help me solve this problem makes me crazy. I tried to install and reinstall photoshop EXTENDED several times and each time I have lunch there ask me serial number in which I entered once, nothing happens

  Hi Glenn,.

  Please try the steps mentioned in the link below and see if you are able to serialize your software.

  • Log, activation, or connection errors. CS5.5 and later, Acrobat DC
  • Try Solution 2: clean the connection of the cached user information.

  Please share the results after you perform the steps.

  Thank you

  Atul Saini

• Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get normal

  Hi, after that I tried to load either a new or existing project into Adobe first Elements 9 I just get a grey white screen with any of the timeline, boxes etc. on the view. It happened suddenly, one day OK then not! At the top of the screen, I get the normal icon of pre, File, Edit, Clip, etc..

  I intend to have bought the first 13 items, it would be better if I bought a new program instead of downloading an upgrade, just in case the upgrade does not correctly load because of the error with my current program?

  If I have the deleted first Elements 9 on my PC would I lose all my existing videos that have been produced using Prime Elements 9 or would they be registered so that they can still be worked in first 13 items?

  First elements 13 works with Windows 7?

  Thank you

  Terry

  First 13 elements absolutely works with Windows 7!

  In fact, I highly recommend you download the free trial version and give it a test run.

  In the meantime, go to Windows Update and make sure you have all the updates of Windows, including those who do not automatically install it. Then go to the website of ATI / nVidia and ensure that you have the latest driver for your graphics card and go to Apple.com and ensure you have the latest version of Quicktime, by the requirements of the program.

• BOOTMGR is missing, press Ctrl + Alt + Delete while trying to install Windows Vista Home Premium 64 - Bit

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Hey ClockworkOtter

  You can't go from 32 bit to 64 bit

  There must be a clean install

  links below have very good tutorials on a clean install of vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  http://www.winsupersite.com/article/showcase/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista.aspx

  Walter, the time zone traveller

• My serial number of Design Premium CS5.5 is not recognized for the PS, after that I have re-installed the program. How can I solve this problem?

  After that I upgraded my Mac OS to 10.10, PhotoShop was no more working. The rest of the Adobe design Premium CS5.5 programms were still working. To resolve this problem, I have re-installed PS now it works, but only in the trial serial number of "Adobe design Premium CS5.5 ' is not valid. No idea how to solve this problem. Adobe customer service can't help. When I installed Adobe design Premium CS5.5, initially, I had the same problem with Acrobat ProX; to make it work, Adobe had to provide me with a number of additional series for this program.

  Hi Andreas,

  Please visit: https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  I hope this helps.

  Concerning

  Megha Rawat

• Code 646 error that I tried to install updates KB977304 and KB976416, but they continue to come down can someone please help me.

  Error 646 dates moved KB977304 and KB976416 please help.

  Hello

  You need these updates? They have already installed or do not have the programs what are
  (Windows updates sometimes suggested those who are not needed). If Yes, then go into Control Panel-
  Updates to Windows - click right on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Computer does not recognize router befsr41 after that I tried to reset it.

  So earlier today, I tried to reset my router because for some reason that I could not log in with my password I use normally, after switching to AT & T of the Charter (from DSL cable)

  Just after that, we moved the router does not either, but we called linksys for repair, but we had to pay $30 and I'd rather not do it again.

  Anyway, my computer will not completely recognize my router. I can't access it is based on the web options page, if I try to use the CD it will say that my computer is not connected. I know the cables are connected correctly.

  Oh and also, why I couldn't use my old password?

  Someone at - it an idea on what could be wrong?

  As you have activated your ISP to a cable on the DSL. The first thing you need to do is, pick up your Modem to the router. Let your Modem is connected to your computer. Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Once you connect to the Setup page of your router, on the Configuration tab, you need to change the local IP address to 192.168.2.1 and click on save settings.

  Once the settings are successful, unplug the power from your router and Modem. Connect the Ethernet cable from your Modem to the Internet Port Linksys router. Connect the power to your Modem first, wait until all lights are cover, connect the power supply to the Linksys router. Once all the lights are solid check if you are able to browse the Internet on your computer.

• Password not accepted on Win 7 after that 10 Windows cannot install

  Update Windows 10 has been declined through process going... back to Windows 7 and now the password doesn't work.

  Windows 10 upgrade decreased original title

  Hi Porter,

  Thanks for posting in the community.

  We are happy to help you to provide the necessary assistance to help solve the problem.

  Before I continue, I would like you to provide the information below:

  1. do you have an error message when the installation failed?

  2. How have you tried to install Windows 10, via the update or ISO file?

  3. do you get an error when you enter the password?

  For now, if you own or have a Windows 7 installation disc, I recommend that you follow the steps below to make the Startup Repair.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the USB flash drive or Windows 7 installation discor a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. In the page install Windows, or on the System Recovery Options page, choose your language and other preferences and then click on Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you use the installation of Windows or the USB flash drive disk, click repair your computer.

  6. Select the Startup Repair tool , and then click on Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Hope this helps

• Need help to get back running my computer after that I stop.

  After I stop and restart my computer I get this black screen with "floppy Q Seek failure, press F1 or the installer.  When I press F1 it bring back my splash screen, but this isn't a normal start procedure.  Help. What's wrong? I had an accident and brought my computer, with the exception of this.

  Hi Jotennis,

  ·        Do you have any floppy drive installed on the computer?

  ·        Do you not see any drive floppy in the computer window?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  You may receive this message if the floppy drive Q drive is enabled in the BIOS if the boot priority is set to boot from the floppy drive and the CMOS battery is dead or if the BIOS settings are set to default return. You can contact the computer manufacturer to help you disable the floppy drive in the BIOS and check the CMOS battery on the motherboard.

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  I hope this helps.

  Thank you and best regards,
   
  Srinivas R
  Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing album artwork after that put 12.5.1 updated

  I've cringed seeing another update for iTunes because every f * time g you do an update something goes wrong. Particularly with iTunes and iPhoto. After 12.5.1, the majority of my album artwork has disappeared. I have an extensive library that I worked at the wire. How many more hours to go back and manually reinsert cover for hundreds of albums? And what happened in the background which reflected the album cover? Now it's white base as years ago. Not only has this update lost my time, we took it back a decade aesthetically and it made me to consider leaving the mac world.

  Maddening sounds. I am one of the lucky ones whose art music turned out fine, but we'll try to figure out how to get yours working again. I'm not able to provide a solution - only options.

  Your audio files are located on your computer:

  (Your home folder) / music/iTunes/iTunes Music /.

  In other words, your mp3s should be located in this folder, integrated into the work.

  In addition, you should be able to purchase your work by watching your backups. If you can, restoration of the work is a simple matter of drag / drop.

• Healing Brush tool works after that I tried everything that was mentioned in the forums and help guides from adobe. Any ideas what else can we do?

  Ladies and gentlemen,

  who knows what else can be done to make the Healing Brush tool works? I use the latest Photoshop CC app 2015 WITH WINDOWS 10. I TRIED TO RESET THE TOOL, CHECKED ALL THE LAYERS, CLONE SAMPLE AND SO ON.

  ANY OTHER SUGGESTIONS?

  [Read https://forums.adobe.com/docs/DOC-7273]
  [Moved from the connections to specific program... forum forum MOD]
  

  Could you specify exactly how the Healing Brush tool is not working?

  Thank you, whoever this moved to the right forum.