Help on PCI 6280 connector

Similar Questions

• Problem with connection diagram - BNC-2110 to PCI 6280

  Hello

  I want to read analog input using BNC 2110 as an interface connected to the PCI-6280. In the first step I want to use the Signal Express to see only the data, but when I choose one of the input and then string I want to see the connection, I get this message:

  ------------------------------

  Connection scheme tool does not send the accessory on the connector 0 of your device:
  BNC-2110

  Please select one of the following accessories to display the supported connection diagram:

  Support for accessories:
  SCB-68

  CB-68LP

  TBX-68

  CB-68LPR

  SCC-68

  ------------------------------

  What should I do in this step?

  Hi MiladAk,

  There is this sentence in the Manual "the BNC-2110 is only intended for differential analog input signals. The 16 channels HAVE on PCI-6280 are mapped to 8 connectors BNC AI0 - AI7 on BNC-2110. HAVE [n] with I [n + 8] represent a differential channel. This means that if you select channel differential AI0 in Signal Express with Terminal configuration it will also use AI8. These two channels is represented by a single BNC connector (connection central driver is positive = AI0, negative connection is shielding = AI8).

  Best regards

  CaravagGIO

• 88705 error on PCI-6280

  After obtaining the 88705, PCI-6280 card error has been removed but MAX still sees the jury and cannot be deleted in the attempt to re - install in the new location.  Any ideas?

  TJ,

  When you say that it cannot be deleted, the option simply in gray? It is after the card has been removed from the system completely?

  Could you also tell me what version of the DAQ hardware drivers you are using as well as the operating system with this computer?

  I found a knowledge base about the error 88705 you can pass by this way: http://ae.natinst.com/public.nsf/webPreview/89A6279147AA994A862572DF00491BCA

  The issue might be with MAX or with a process runs do not, then let me know everything above and if the KB help at all so we can we this necessarily so plu. Thank you.

  Timothy

• 23 - d130ea pci express connector envy

  Recently purchased a dvb - s2 (pci express) card, can't find the connector motherboard relevant.

  Any help much appreciated

  HP ENVY 23 - d130ea TouchSmart all-in-One desktop PC is a computer 'All-in-one' who doesn't have any full size PCI Express slots in it.  The PCI Express slots only this computer, are strictly internal PCI Express mini card Sockets and a PCI Express MXM slot for special MXM graphics card.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• What is this on my PCI DAQ connector? (PCI 6259, M-Series)

  I'm building a new rig which includes a PCI-6259, am confused by this connector:

  

  What this is, and which mates with it? This is the place where I expect the power connector PCI-E to the power of the system, or the 'hard drive connector"that the M series is supposed to have. But this has about four times as many pins I guess than to have. It is not schematized or mentioned in any job I can find online.

  Yes, version PCIe card has the supply and on the back of the card connector.  The PCI version does not work.  I think it's because PCIe is a lot of current as long as PCI, so the extra power is needed.

  Both versions have if the RTSI connector.

• ... Should help I PCI slot available in my HP Pavilion Slimline s5xt?

  Hi guys!

  I recently bought a HP Pavilion Slimline s5xt.  I discovered that I need a firewire port so I need to install this PCI Express card.  Make my day... Please say this is possible.

  Here is the link to the map that I need to install:

  http://www.Amazon.com/GP/product/B002S53IG8/ref=ox_sc_act_title_1?ie=UTF8&m=A2XNAOBSW0CZDL

  Please let me know.

  Thanks for your help!

  Hello:

  This link to the motherboard for your specific model record confirms the existence of 3 PCIe x 1 slots, each of them can be used for the PCIe x 1 firewire card that you are considering buying.

  Given that the package specifications indicate that you get the profile regularly mounting brackets and low profile, your bases are covered.

  http://support.HP.com/us-en/document/c02831611

  Paul

• HP 110-510 x: need help on pci, bus and usb sm controller

  I just spend Budled Ubuntu a Win7 Ultimate, but I can't find the driver for pci encryption controller, sm bus and usb.

  is there a compatible driver, I can use it, even if his other product HP?

  Thank you

  Hello:

  For the smbus controller, install this driver and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127758_1

  For the usb3 controllers, install these two and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

  For the encryption pci controller, download and run this driver... It will probably not install the device automatically.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_133833_1

  Go to Device Manager and click on the controller E/D PCI needing drivers.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66974.

  Make sure that the include subfolders is selected, and the driver should install.

  Then restart.

• When Coldfusion 10 will be updated with a new version of Tomcat, help with PCI compliance?

  Hello

  McAfee Scan Alert reported that Tomcat version 7.0.23.0 is not compatible pci.

  We are on CF10 and just put update to update 12.

  We read in another thread that Tomcat is specialized for the CF and that

  CF should be updated Tomcat as needed.

  The complete Scan alert warning is:

  Scan indicates that you are using a vulnerable version of the server web apache tomcat. The version of tomcat deployed to this web server may be outdated and vulnerable to a series of issues (including but not limited to)

  -denial of service attacks

  -crossing of directories

  -by default the admin password

  -l' run the code by downloads arbitrary files

  -circumvention of access restrictions

  -cross-site scripting

  -session fixation

  -circumvention of CSRF prevention filter

  Thanks in advance,

  -Mike

  Yes, Steve, if your site is running on the integrated server (something that Adobe suggests only to development and never in production), then Tomcat is directly accessible. If CF is running on Apache or IIS, lockout procedures in such place as specified in the guide of lockdown, Tomcat should not be directly accessible.

• Pavilion HPE: I need the jetty (or HP) part number connector PCI-e edge to replace on a H8 - 1360t

  PCI-e GPU in my H8 - 1360t was pulled without releasing the tab on the connector edge first. Therefore, the connector plastic pulled free of the fingers. The PC is long out of warranty and it would be excluded from the guarantee in any case.

  This leaves the PC unusable because plastic case can not be delayed to the fingers. If the motherboard will need to be removed and replaced the edge of the PCI-e connector.

  The connector is made by Jetty, but has no part on that number. I need a reference number in order to get a replacement. As far as I know, there is no manual tech specific part for the motherboard I could mention this information. She will have to come from a person to HP.

  Help.

  A difficult search for the part.

  http://www.ttiinc.com/object/fp_fci_pci.html http://www.Farnell.com/datasheets/188358.PDF   

• Need help! SR1830NX

  I recently bought a new video card, e-GeForce 8800 GT from NVidia (EVGA) and he said that must be a minimum of power supply 400 watt with 26 amps on the rail + 12 v and an additional PCIe power connector (or two connectors of HDD).  My current diet is only 300, so I know that it won't work, but I just need help to choose a new power supply.  I did a little research and it seems that http://www.bestbuy.com/site/olspage.jsp?skuId=8545158 & type = product & id = 1188560188623 this product will work, it's high notes and all, but I wonder if it will work even with my computer.  Once again, I have a Compaq Presario SR1830NX and am just wanting to upgrade to a better diet.  Will be the one that I chose work w / my motherboard?  Thanks for any help!

  http://www.Newegg.com/product/product.aspx?item=N82E16817371006 I think it's the only one that I will eventually buy.  = D a person left a comment indicating that the + 12V "double rail" was in fact a single rail 30 a, and it is 430 watts, so I think it should work without a doubt!  = D thank you very much for your help!

• NVIDIA Quadro: I plug 6-pin power adapter or connector 8 pin?

  I am trying to install my graphics card Nvidia Quadro 6000 on a HP Z820 with a PSU 1125W

  The Quadro card: 1x8pin auxiliary power connector and power connector auxiliary 1x6pin.

  My questions are

  1. in the connection of my power adapter, do I plug the unit into the 8 pin or 6 PIN auxiliary connector?

  2. where can I connect the other end of the power adapter?

  3. the power adapter must be a HP one or can I use any brand.

  4, if it's HP, what is the part number

  I would appreciate help on this.

  Vinny

  Edit: Here is this link related to this issue.  It goes also to other topics with excellent similar information:

  http://www.TomsHardware.com/reviews/power-supply-specifications-ATX-reference, 3061 - 12.html

  First, it is important to know that there is another interface "6 to 8 pins" which is a feature of power-for - motherboard power ... you don't want that, sure, and connectors plastic is having different shapes.  You can see that he has 4 yellow wires (usually the supply wires) and would not have the sequence of correct wiring of a PCIe 6 to 8 pins supplementary power converter:

  

  I don't know the show, too, is not what you want.  This looks like an 8 pin to two adapter 6 pins.  You want a 6-pin to 8 pin adapter.  Is attached another picture of the nVidia type tells you to do.  If you look at the hyperlink at the top of this post you will find the wiring of 6 pins on 8 wire and for your project, you will probably want to follow the advice of nVidia for best results.  There is power to the ground and 'sense' son to all be correctly connected to the adapter.

  There is also some PCIe additional adapters that allow you to convert several sheets supply 4 son "molex" grouping in a single 6-pin PCIe or connector 8.  It is best to not do this if you have a power with official ones built in.  Your the fact, and to check the manual, it looks like your top rated power supply has 3 of these auxiliary PCIe power cords (G1, G2 and G3 will be printed on the side of the end of your 3 card).  On the other hand, offer reduced rated power of the Z820 has only 2 additional PCIe (auxiliary) cords supplied by it.

  I don't know if you are forced to use a good 6-8 converter or could if away with plug 6 pin right in the correct position on the plug 8 pins of your videocard directly, according to article of the hyperlink.  I, personally, would get an adapter.

  EDIT: Here is a picture of two ends of what is supposed to be a PCIe 6-pin supplementary power adapter PCIe 8 pins.  The first and third power pins 6 pins are officially DC 12v (some references have each of the first 3 pins being 12vDC) and subsequently, the rest are supposed to be a 'sense' or earthed.  When I look at the plug 8-pole end wiring I do not see a ground wire or ground jumper coming to pin 8.  I would not recommend it, unless I'm wrong about his son:

  

• HP Compaq 8100 Elite: Video unrecognized card in PCI-Express x 16 slot for security

  I disable the PCI Express connector in the computer - security - Slot Configuration on BIOS.

  I don't know that my card on Board did not work and now machine does not start, machine beeps 6 times (error video card).

  I can't access the bios.

  I try to reset the CMOS, remove the Green rider, remove CMOS battery, press the button within 10 seconds, press the power button (to remove rest of energy.

  But none of it works.

  Can someone help me?

  How can I reactivate PCI Express x 16?

  Hello:

  If your integrated graphics card does not work, and reset the CMOS does not work, you can try putting the PCI express x 16 video card, you now have in the location PCIe White x 4 slot (slot next to the slot PCIe x 16 black white video card) and see if you can get into the BIOS to change the PCI x 16 setting.  It might work in the x 4 slot.

  If it does not, you will need to install a video card PCI (the one that goes in one of the white PCI slots) and use it to get into the BIOS, so you can change the settings to enable the location of PCIe x 16.

  So see if you can find a cheap, used, video card PCI on eBay, and should allow you to have the video again.

  You should also make sure you have removed all the connections of the computer when you reset the CMOS (all cables, power supply, mouse, monitor, etc.).

• Help installing graphics card

  Hi, I recently bought a new graphics card for my computer trying to install it, with the new card, that I can't in front of the screen of the bios at startup. I don't know much about computers, but am guessing it's a compatibility issue with some of my hardware. My pc is an HPE h9-1010 has and the new graphics card is overclocked Geforce GTX 660 2 GB Gigabyte-GV-N660OC-2GD. Any help would be appreciated.

  Whereas the new map replaces an NVIDIA card and the power supply meets specifications and there are two available PCIe power connectors, it would seem that the video card may be defective.

  Your PC and its characteristics do not meet the own GigaByte published system requirements for the video card. Contact the vendor for a replacement under warranty.

• P5LP - Incompatible with 1 GB card video and/or 2.1 PCI Express card?

  I have an old m7480n I am upgrading the video card.  I found and read many post on the problems of upgrade to 2.1 PCI Express card or current cards with 1 GB of memory.  I need the answer to help me make the right choice of video card. Or just tell me which card will work for about $100.

  Plug;

  Power supply 450 watts (360 watt on rail 12v with 6-pin PCI-Express connector)

  3 GB Ram

  BIOS is 3.19

  Motherboard; ASUS Emery-ul8e

  Try and could not install a HD6770 1 GB PCI Express graphics card.

  Fixed; I'm running with a GTS 250 PCIe 2.0 512 MB video card now.

• Built-in Wi - Fi card connector

  My Equium A60-155 came without Wi - Fi but solder tabs are on the main map. Anyone have a connector Mini PCI 124 (connector side) of Type III, or know where I can get one?
  I want to solder on the card and install a Wi - Fi card so I can release the slot in the PC.

  And what's with Wi - Fi antenna? The laptop is not Wi - Fi ready, and I guess that the WLAN antenna is not there.
  To use WIFI on board isn't so easy. Maybe you should continue to use the external solution.