My phone fell and the phone won't turn on or charge

Similar Questions

• Phone won't turn on or charge

  Hi all

  Less than a week ago, I bought a Xperia Z5.

  And today while you use (Internet I think), it stop with > 50% remaining battery. I couldn't activate it.

  I tried to recharge via USB and PC, did not work. Once back home, I loaded for like 40 minutes then tried to turn it on. He showed no signs of the load (the led blinks or stays red for a few seconds sometimes). I tried restarting of 120 seconds. I've never seen the loading icon. I tried the volume top + power button, took out my SD. Nothing. Should I try factory reset (CCP does not seem to recognize atm, even if I used it yesterday to copy my old phone, process that stopped in the middle and never finished), or should I bring it to the seller?

  Any help appreciated,

  Kind regards.

  Thanks for your help

  But my local dealer exchanged this morning...

  I have published this message yesterday before going to sleep, is there a way to close the topic because the issue slipped by the presence of a new phone?

• just downloaded windows 7 ultimate throught (the anytime upgrade feature) and now it won't turn on... Please help

  just downloaded windows 7 ultimate throught (the anytime upgrade feature) and now it won't turn on... Please help

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• Unable to determine the type of AC power adapter. Your system will run more slowly and the battery won't charge.

  I get the error message is: AC power adapter type cannot be determined. Your system will run more slowly and the battery won't charge.

  Hello
  (1) when you receive this error message?
  (2) what is the brand and model of your computer?
  (3) did you change on your computer before this problem?
  It seems that the adapter has gone wrong, I suggest you to connect another card and see if the problem still occurs.
  You can also contact the computer manufacturer for assistance on this issue.

• Parental control: I am the admin of the computer and the computer won't let me access the list allow and block my child's account

  I am the administrator of the computer and the computer won't let me access the list allow and block my child's account.  I'll bring my parental control password, click on my childs account, put parental controls, go to web filter and click on block some web sites, click on edit the allow and block list and the computer tells me that it is not able to make changes to parental controls settings and see the system administrator if the problem persists.

  Hi Ranw,

  ·        What is the error message when you try to change parental controls?

  ·        Have you been able to make any changes on this computer from your account earlier?

  You can follow the steps below and check if you can make changes to the parental controls on your computer.

  Step 1:

  Disable UAC (User Account Control) and check the result. Access the link below and follow the steps to disable UAC.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

   

  Step 2:

  I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account:http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account

  Check out the link below to check if the parental control is properly set:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  My project will not move past slide 7.  I created a new project using a ppt presentation and the porject won't move past slide 7 even in preview.  Help?

  I was pulling the presentation ppt to a network drive, so he didn't fully assume.  I saved the presentation on my desk and imported again and it worked fine.

• I dropped my iPhone and now it won't turn! fear a lot what do I do now?

  I dropped my iPhone and now it won't turn! fear a lot what do I do now?

  Your best bet is to get to a repair facility independent of having your phone looked.

  iPhone 4 s are little tough suckers, so you can have just a disconnected, damaged screen or display battery disconnected in the drop-down list.

  Your option at Apple is a one off replacement warranty on a 4S which means turn into your phone, pay $199, get a 4 s handed to nine.   It's too much pay for a 4S these days.

  In a shop that specializes in independent repair, someone can help troubleshoot your phone to see if it is a problem of display which are highly soluble or battery. Cost-$ 50 - $100 depending on the problem (s).

  If you have more serious damage to the Board, then it can be useful to continue given the value of the unit.

  How to identify a quality independent repair shop?

  Do the research.  Not all independent repair shops are trustworthy, and the quality of the parts they use can vary.  Looking for a store with good reviews, a solid guarantee at least 6 months on the repair and a guarantee to solve your problem or toll-free.  Ask that they source their parts.  Any store claiming to use real Apple original parts should be avoided, as this is not possible.  Independent repair is a fantastic option for comfort and savings, but you have to do some legwork to find a store in your area, given that many of those unscrupulous.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  Hello

  Check if the hard disk needs repair.

  Open the disk utility, located app in HD > Applications > utilities

  Select Macintosh HD on the left then click the first aid tab, and then click Run.

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• My satellite phone battery does not light and the battery won't charge (rest on 2%)

  Basically, my laptop is 3 months old and I don't know why it's acting weird. First of all, when I bought the laptop in June 06... the first week the laptop has no power in battery mode. So I stopped using the battery mode and still had to use my power adapter to power my laptop.

  Now 4 weeks later, I removed the battery to the rear and put again. Guess what the battery started working. Now 2 months later the same problem occurs, only that this time after removing the battery to it still turn on and the battery says 2% and also fails to load.
  So I m stuck with my son again... can anyone help?

  Hello

  In my opinion the best solution is to confront your local dealer with this problem. If I were you I wouldn't waste time. Unit is fairly new, warranty still valid and unit should operate.

  Perhaps is there some problem with electronic supply power.

• Bridge of Sony for Mac. wanted an update, and phone won't turn on now!

  Hello

  Today, I tried to transfer files from my phone to my Mac. When I plugged my phone the Sony Bridge for Mac asked me if I'd like to update so I clicked Yes and it started to be updated with my phone connected. Then out of it, my phone off and it won't turn on. It will only vibrate and display the Sony logo but won't go any futher. I tried the combination of flight + and start/stop button and many others, but nothing works! I need my phone very quickly at work, and I really don't want to lose all the files!

  Help, please!

  It sounds more like you had an update to the system firmware and you can have disconnected your phone that this process was going on - anything you can do I'm afraid to say is a repair of the system, but this will erase all data on your phone

• BlackBerry Smartphones icons disappeared and the menu won't pull up.

  OK, so I have a 8310.  I left my phone in the car for a few days (maybe something could have been by pressing one of the buttons while he sat there?) and when I picked it up, all my icons had been activated around and nothing was located where it was when I used the latter.  Everything worked fine, just all of the application and the homescreen icons were all scrambled to the top.

  This is the case, a * beep *, I decided to try to move the icons and put them back where they belonged.  I was able to highlite an icon and move it, but when I tried to finish the move sit icon where I wanted, the icon would be to just move with the trackball and has refused to sit in one place and stay there.

  Then I get a call on my phone and everthing is now the country of Wonderland with Alice and the White Rabbit!  All my icons have left the home screen, and I can't pull up the menu screen.  The trackball seems to work very well.  The blackberry icon button (between the button ' to call ' green and the trackball) seems to work (when the screen is black, you can push it and the screen lights up) but when you press it, the menu won't pull up.

  I thought that maybe I hid all the icons somehow?  I'm just confused on this one.  All the information at the top of the screen is still there.  Time, date, signal strength, network and all my message alert icons are visible.  I use the image as background is under the eyes, just all the icons disappeared and I can still shoot to the top of the menu to fix.

  1. press the Menu key and click SHOW EVERYTHING, as well as show that everything is checked.

  Now look around and see if you the icons. If this menu button still does not work...

  2 perform a reboot of the device: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

  A little luck?

  3. If still nothing, try to go to the Options icon if you can find and choose themes and change the themes... now all the icons?

  If you can't find the Options icon, press the green line to enter the call log.

  Press the Menu key > Options > General and make Options scroll down with a line to the home screen and the value to no.

  Now, go back to the home screen of the BlackBerry and press O (oh), alpha to zero. Who will pull up in your Options menu now