Help return - turn on 3G
I'm on wifi and connected to my home router Tournai. Problem is that now, when I turn off the 3G does not work. I had the app Switcher network and thought that it is perhaps the issue, so I deleted and restarted my phone to be sure. But it still does not work. I have small 3G symbol at the top of my screen, but the arrows which will normally appear on her show the transfer of data are not displayed and I can't connect to the web, etc. I know from the first day I started my phone that the 3 G does not work in my area. Can someone help me? Thank you!
Bashly
It is possible that a reset would help. It is under:
Menu-> settings-> privacy
You would still be running Android 2.1.
----
I'm a volunteer. The MotoXprt tag means that I spend too much time here. The views expressed in my posts are mine. I am owner of a Backflip and a setback. If my opinion doesn't have any sense - ignore it!
Tags: Motorola Phones
Similar Questions
-
Satellite U920T - need help to turn on the WiFi
Hello!
I have a laptop Toshiba Satellite U920T.
My OS is Windows 8.1 x 64 with all updates.
There is a challenge with wireless which started after I put in place a flight on charm bar Mode and back fired.When I disabled the flight Mode, the switch wireless of charm bar is remained handicapped as shown on the screenshot (sorry, all the screenshots are in Russian, but if something is not clear I'm ready to explain)
http://bit.LY/12HGayL
The adapter in Device Manager is Normal
http://bit.LY/1Gd2ygA
It is the latest version of the driver installed
http://bit.LY/1Itn4NO
The Windows Network Diagnostics Wizard detects that the wireless is turned off.
http://bit.LY/1w84plz
When I try to enable wireless using the utility of the farm, he pointed out that I should turn the WiFi hardware button
http://bit.LY/1ItncNd
But my laptop is not any material for the WiFi button. Only hokey, but it comes to establish a flight Mode.Need your help.
Sincerely,
VadimGuess, what, I think that there is a problem between the driver and the system and consequently the system reports that the WiFi network is DISABLED.
I recommend you to uninstall the Intel Wlan Device Manager driver.
Then, you must restart the laptop.
Please perform a complete shutdown (no hybrid closed, standby, etc.)After the new reboot, install the Wlan driver and reboot once more.
It would be really interesting to know if you can activate the WLan after this short driver installation procedure. -
Help with turning on Mobile network blackBerry Smartphones
My blackberry curve does not connect to a wireless network. I tried to check the box Mobile network in respect of the management of connections and do not access. I turned the phone off and then turned it back... nothing. I have disabled all connections and then turn it back on and still nothing. When I try to call from the phone, I enter the phone number, press the button send green and nothing happens. I try to compose my contacts and nothing happens. I tried calling my phone and it goes straight to voicemail. I am home, which, for the last 6 months, the signal was strong. I'm at my wits end. Help!
I jumped the battery and put it again and everything was fine. In the 6 months that I have owned a Blackberry, it's never got stuck like that. I hope that it is an instance of time.
-
JavaScript, script working almost help returns something weird
Hi scripters,.
I work almost Javascript Variable to inDesign who kindly gave to me (see below) I know very very little JavaScript and I almost got this job I just need help.
The script returns the size of the document and the unit of measurement to a variable, but my goal was to get the unit of measure to be abbreviated (IE; Mm mm)
It works, but it also returns a weird thing in front of mm (NaN).
function toTitleCase(s) { return s.toLowerCase().replace(/\b\w/g, function () {return arguments[0].toUpperCase()}); function getPageDimentions(page){ var width, height, bounds, units, abbr, decPlaces; // function presumes that normal pages // i.e. same vertical and horizontal and no page shape transformations decPlaces = 3; units = toTitleCase(page.parent.parent.viewPreferences.horizontalMeasurementUnits.toString()); // If you forgot to include the toTitleCase function then remove the method abbr = UnitValue(units); bounds = page.bounds; height = bounds[2] - bounds[0]; height = myRound(height, decPlaces); width = bounds[3] - bounds[1]; width = myRound(width, decPlaces); return height + " x " + width + " " + abbr
Any help would be greatly appreciated!
Scott
Hi Scott,.
you have not provided the script. And some closing hooks are missing as well.
However, the point is, that you use:
abbr = UnitValue(units);
Instead of:
abbr = UnitValue(units).type;
like Marc suggested this other thread.
Uwe
-
Need help to turn off (?)
I had 6 Lightroom installed/activated/registered on a Dell desktop computer. A few months ago, the motherboard has failed, and Dell repaired under warranty, so I now have the same rear machine. However by doing the repair work they also reinstalled Windows and erase everything on the hard drive, despite my statement is not to touch the hard drive. So now I have to reinstall all my programs, including 6 of Lightroom. I downloaded LR6 and enter the serial number, but an error message informs that the serial number is already registered - what is correct. I need to somehow disable the program and turn it back on? With the program is no longer on the hard drive, I don't know how to disable. Or is there another procedure to use? Thanks for any help you can provide.
Best, Ted
Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html
request a reset of count of activation.
-
I forgot to turn off my copy on the old laptop, Premium CS3 and I can't activate the copy on the new laptop, any help?
Tried to contact adobe but the numbers they gave doesn't support activation on the phone and it's a message if anyone talk to him.
Live chat option is not available on the internet. my laptop runs window 10.
Hi Alaa,
Please contact the disabled assistance team:
Let us know if that helps.
Concerning
Megha Rawat
-
Help returns the array of query results
Hi all... Pretty new to this so please forgive my ignorance. Running Oracle 11 g, trying to return results as in the example I give below. I don't know how the Sport field will have unique values, and I don't know how many unique values the year field is seen in the data. Does anyone have recommendations/suggestions?
The structure of the table is:
Year of sport
Baseball 10-11
Football 10-11
Football 11-12
Football 11-12
Football 11-12
Baseball 11-12
The result should be sports in each year and should be grouped by year but shown as columns so:
(GROUP OF the year)
1, baseball 1, Football
2, 1, Football Soccer 1, Baseball
I hope that makes sense. Thanks for any help!
... KaelonDoes anyone have recommendations/suggestions?
Maybe something like:
SQL> with t as ( select 'Baseball' sport, '10-11' year from dual union all select 'Football', '10-11' from dual union all select 'Football', '11-12' from dual union all select 'Football', '11-12' from dual union all select 'Soccer', '11-12' from dual union all select 'Baseball', '11-12' from dual ) -- -- select year, listagg(cnt || ', ' || sport, ' ') within group (order by cnt desc) sports from ( select count(*) cnt, sport, year from t group by sport, year) group by year / YEAR SPORTS ------- ---------------------------------------- 10-11 1, Baseball 1, Football 11-12 2, Football 1, Baseball 1, Soccer 2 rows selected.
?
-
Need help return correct name of a created the code clip
Hello. I'm a n00b AS3 with fortunately we a simple question I am designing a simple flash game. Copy the following code creates an array of video clips and the bsigns a photo for each of them. It is a map screen. What I need, it is when I click on one of the created movie clips, I need to return either the index of the item in the table or the name of the clip. Basically everything that I can use to differentiate them in the code. Here is the code:
import flash.display.MovieClip;
var MapLoader:Array = new Array();
var strJPGext:String = ".jpg";
var intContTileNumber:int;
var strContTilePath:String;
var intDistStartX:int = 63;
var intDistStartY:int = 64;
var intDistMultiplyY:int = 0;
var intDistMultiplyX:int = 0;
var intDistCount:int = 0;
var MapSquare:Array = new Array();for (var i: int = 0; i < 729; i ++)
{
var MapSquare:MovieClip = new MovieClip();
MapSquare.push (new MovieClip());
MapSquare [i] .x = intDistStartX + (intDistMultiplyX * 30);
MapSquare [i] there = intDistStartY + (intDistMultiplyY * 30);
MapSquare [i] .name = "MapSquare" + i;
addChild (MapSquare [i]);
intContTileNumber = i;
MapLoader.push (new Loader);
strContTilePath = intContTileNumber + strJPGext;
MapLoader [i] .load (new URLRequest (strContTilePath));
MapSquare [i] .addChild (MapLoader [i]);
intDistCount ++;
intDistMultiplyX ++;
If {(intDistCount > 26)
intDistCount = 0;
intDistMultiplyX = 0;
intDistMultiplyY ++;
}
}
stage.addEventListener (MouseEvent.CLICK, reportClick);
function reportClick(event:MouseEvent):void
{
trace ("name of the movieClip Instance =" + event.target.name);
}Now, it all works very well, it creates the plan and assigns the correct image and places them in the good X, position Y and this is the good 27 x 27 squares grid. The problem is with the name, when I click on the clip, it returns "Instance2" or "Instance5" or something else. It starts by 2 and then increases each number by 3 for each clip, so the first is 2, then 5, then 8 and so on. This is not good. I need to return the name I have given
. If I put the code in trace(MapSquare[1]) it will return the name 'MapSquare1' so I know has been assigned the name, but it is not returning.Please help
Thank you
-Red
Add event listeners just like anything else you set in the loop for...
MapSquare [i] .addEventListener (MouseEvent.CLICK, reportClick);
They can all use the same event handler function, so there is no problem.
-
Need help to turn on hardware virtualization on my Lenovo Ideapad y330
Hello
I have ideapad Lenovo Ideapad 330 with Config like below:
Processor: Intel (r) Core (TM) 2 Duo CPU [email protected] ghz 2.00 ghz
RAM: 2GB
HD: 320 GB
OS: Windows 7(32bit)
I want to know is hardware virtualization supported by my laptop, if yes, then how can I activate it because the Intel VT Settings feature is coming in the Bios disabled and I'm not able to activate.
Please provide a solution for it.
---
Thank you
updating the BIOS will not help you because your chipset does not support vt. Thus, there is nothing you can do about it.
-
Help! Turn on 10 power but nothing on the screen!
I got my switch 10 during about 6 weeks. First month was great. Then he started to get stuck in the mode 'sleep', but on mine, I realized I just need to hold the power button for 10 seconds to turn off or would be put on normally when I press the power button again. We were happy about that, he has worked steadily.
Thus, from yesterday: the battery was dead the day before. I left that it plugged in all night and day, then last night, I unplugged and tried to power it back it up. The backlight comes on - and sometimes it stays on, sometimes it goes off after about 10 seconds - but nothing happens. I left it on with the backlight all the night night LAST to drain the battery again. This morning, he was off, I plugged it in, same problem, no change.
I tried the button power + down / volume; Alt + F10; the reset button seems to do nothing; I have also seen a suggestion of F2 + F9 + F10 + entry that also did not work.
I can tell when the device is activated because the windows at the bottom of the screen button starts to vibrate when they are hit. Right now he's connected with the fixed Orange light in the power button.
I am afraid that the thing is just gone, but is there anything ELSE I can do? It was a refurb, so there is no guarantee. The seller has provided a 30 day warranty. Ha ha.
Thank you...
OK a tower more: with PC switched off, hold down the F2 key on the keyboard, then hold the power button until something happens.
After that, I'm out of conjecture.
-
my computer vista laptop and it's a siemens figitsu
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner
-
Need help, returning at the request of private
Hello
My application uses a private to open a web page. When the web page opens, the user types in their login credentials, and then they are transferred to a new site that told them to close the BlackBerry browser and return to my request.
Now, I'm trying to see if I can do the following:
-Create a URI template customized for my application, so that the Web site can send to an address as "myapp: / /...". "and will open my application. I did research online and on the forums on this subject, and I don't think its possible. I searched a lot on JSR 211 content managers and MIME types. I have also studied the chapidemo demo in JDE samples.
-Close the private. I know that I can't do this from within my application. I moved my application in the foreground successfully after my application filed an HTTP successfully, but the browser returns to the foreground when the Web site transmits to the new page (which tells the user to close the browser)
-Somehow determine the URL of the current private. If I could do it, I could have my application in the foreground when I recognize the URL of the page that was passed to the.
Unfortunately, I can't use a BrowserField because the site that I opened in the browser must support javascript and ajax... I tried this in the BrowserField, and it did not work.
Does anyone have any advice or suggestions?
Thank you!
I was able to achieve bringing my application to the foreground once the browser forward towards a new page using JSR 211 and a type mime custom. (BrowserPlugin.java & LoaderApp.java JDE samples)
-
Help [return to the trial]
I paid for creative cloud but continues to appear as a trial, some others are not expired. Difficulty please
Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-If you have more than one email, but of course you use linked to your subscription
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
-
I need help to turn a document. I have just basic acrobat reader.
This afternoon, I received a document but it is horizontal, and I want to go up and down, instead of on the side. I have Adobe just, DC, I have the basic player and not the premium. Can someone help me please. Thank you.
You cannot page rotation permanently with just the free reader. Can be done with Acrobat.
-
grid enabled on each image, need help to turn off please, uughhhh
I have a few active how the function of the grid (Ctrl-h) on EACH image, I opened. I need to disbale the grid manually for each photo by pressing control-H. It is listed under 'extras' as well. Please help me to disable this permanentely so I can't do every time! Thanks in advance!
Tracey
See-> see the--> grid
Maybe you are looking for
-
After your update about two days ago, it contained spyware WEBGET... as an add on... I had no idea was being installed.It took a while to understand how to remove it.Just an info
-
What is this small speaker looking thing near the FaceTime camera?
I found one thing of speaker llittle near the FaceTime camera on my iPad is what
-
24 v digital signal of the event from the host to the fpga power on/off
Hello forums or Sheet material cRIO-9074 module or 9472 digital module 24 V output c series To expand on the topic described, I want to be able send a trigger to alarm the fpga digital 9472 out that lasts 30 seconds using the operating system time re
-
Multimedia Windows will not play on the image but games on laptop desktop
Try so a video a meeting running xp and windows media file player I see on the cell, but the image of prijected is a black screen. Help
-
HP Photosmart: No black printing more
I changed my cartridges yellow, pink and blue as they were low on ink. After this operation, all the impressions I have try to make are without any black. Theblack ink level indicates half full. I tried to rebbot the PC, the printer... moved the blac