Help setting up Windows XP virtual. No hardware assisted virtualization detected error

Similar Questions

• I can't open windows dev, required audio hardware is not detected

  My computer says: "Windows movie maker cannot be used because the required audio hardware is not detected on your computer".

  The audio material is on my computer. I downloaded the audio to youtube, I have changed it to an AVI file with www.zamzar.com

  Can someone help me please?

  It is already very clear. The audio from your computer does not meet the minimum requirements of Windows Movie Maker.

  Hardware audio here refers to the audio device (common examples are Realtek and Conexant High Definition Audio) in your computer and not the audio file you want to add to the film.

  Audio drivers may be damaged or have problems.

  Please tell the following details on your PC-

  * Manufacturer/OEM (HP, Dell, Sony, Acer, MSI, etc..)

  * The series and model

  The information could be useful to find the updated drivers for your audio device.

  Also, press the Windows key + R, type devmgmt.msc and press ENTER. Expand sound, video and game controllers, and then check that your audio device is there. Also, double-click on your audio device, click the general. The State of the device should be "this device works correctly. If it displays errors or problems please post a description of the State of the device with the error code here.

  Also, try to download and install Windows Movie Maker Version 2.6.

• Can I run a HP Omni 1020 t in the mode of hardware-assisted virtualization?

  HP Omni 120-1020t CTO desktop PC

  Windows 7 Pro

  BIOs LEO - 703

  You are welcome.

  Have you downloaded Virtual PC for XP?

  http://www.Microsoft.com/Windows/Virtual-PC/

  I have some experience using XP mode for testing on my HP Elite 8200, not on your PC itself.

• (Redirected) Activation of hardware assisted virtualization in the bios of alienware aurora (late 2009 model)

  Hi all, I wonder if someone can help me to activate it in bios? I ran ms HAV detection tool and my processor is capable, however, there is no option to enable it in the bios. After looking at the manual of the pc option isn't there either. I'm about to watch updated the bios, but I thought I'd throw the question out there as I watch.

  Thank you

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Need help to install windows 7 Home premium on my mac.

  Ideas:

  • Need help to install Windows 7 Home premium on my Mac
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Installation of Win7 on a Mac has nothing to do with Windows Update. Please repost your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  How communicate you with a real person who can help set up my Photoshop CS6 license from a computer Windows to a new Mac?

  Hello

  My son has Adobe Photoshop CS6 when he attended a school for dyslexia and disorders on the autism spectrum with software for students in the United Kingdom.

  He has used with success of this edition.

  I have the codes on the box but didn't post here not sure of what?

  He moved to one-sixth of the Collyers in Horsham college and had to buy a new laptop. The College being all Apple we brought a pro IMac.

  He studied art, graphics and media education.

  It is a challenge for a person with an age of 7 years in reading! Spell checking in the Photoshop really helped his presentation work. The IMac has the recognition voice very good text.

  It will be if everything's going to be all right on to art College to study graphics.

  The problem is that he must now get his Photoshop on his new laptop computer and the version that he only works on Windows.

  It is possible to send a new code for the CS6 works on his laptop?

  In the future it will need to Photoshop and Illustrator professionally, but at this level, we cannot justify paying a monthly fee for the latest version.

  Hope you can help.

  Regarding the contact with a real person who can help, which will be necessary for you to follow through with what you want so be prepared to have your exercised patience and hope that it is not.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• This message could not be sent. The authentication setting are may not be not correct. He said go to "help" click "Troubleshoot windows mail", but I can't find it. Now I find that I can't receive any message.

  It started just two days before, when I tried to email a bow popped up. Some ocured of errors in the processing of the application. See HELP, click "Troubleshoot Windows Mail" I do not see this statement today. Yesterday, I found somehow and make their operating instructions and arrived in the box, I put a check mark in one of the boxes, and now I can't receive my mail. Can you help me a...

  Try to compact and repair the database and see if that helps (see www.oehelp.com/WMUtil/).  And beware of the antivirus software that may interfere with WinMail.  See www.oehelp.com/OETips.aspx#3

  Steve

• Help please... Replaced the hard drive of MBP, restored from TM, but the Windows XP virtual machine does not start

  I replaced the 250 GB hard drive in my MacBook Pro early 2009 with a 500 GB drive, it the Mac OS extended (journaled) format and restored from my Time Machine backup.

  Now when I try to start my Windows XP virtual machine (using Fusion 2.0.6... planning upgrade to 3.1.2 but wanted to validate all was well first), I get BSOD, even in safe mode.

  I have my vm separately saved on a network drive data files based on things that I had read before, I do not think that TM backup of virtual machines. However, a friend with a similar setup with more knowledge I think because I could see my Windows XP vm VMWare listed under 'Documents' in Time Machine showing its full size, it has actually saved and there restore it. Apparently he has done this successfully before.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  TIA!

  Katie

  To be clear: you have restored VMs from the disk or network time Machine?  And if the network drive, what backup method you use?  (i.e.: have you just copied engine off the computer virtual package or not?)  Can you copy/restore the virtual machine to the network again drive?  What is a virtual machine that has the error, or other virtual machines have problems?

  Time Machine backup correctly a virtual power off machine. But since Time Machine works automatically, you often will get not a consistent backup unless you do some tricks to make sure Time Machine backup only when you use a virtual machine.  (i.e.: turn on Time Machine only when you're done with the virtual machine.)  Thus, it is normally recommended to exclude the virtual machines from Time Machine and use another method to back up virtual machines.  Your friend is lucky or is only backup virtual machines powered off.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  The Mac player Paritioning is unnecessary unless you use Boot Camp or have required another for the partition.

• HL-DT-ST DVDRAM GH24NS07 ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 39)

  See the question above.  Thank you for your help.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to reset the administrator password in my Windows XP Virtual Machine

  I just created a Windows XP virtual machine and have been using it without any problem.  Today, I started the machine and he asked an administrator password.  I believe that I have not set up one that I've never been asked before.

  How can I reset my password or I have to rebuild a new machine?

  Can I use a password reset utility?

  Thanks in advance for any help.

  Kind regards

  Doug U - M

  If an empty password does not work then you probably have to rebuild the virtual machine. This time, I recommend adopt you the practice of setting up a second admin account immediately and make a note of the password. It's the same when you buy a new car: you get at least two sets of keys.

• I lost the bar background tasks, start menu and help on my windows 7__

  I lost the bar background tasks, start menu and help on my windows 7

  Hello
   
  1. are you able to use the icons on the desktop with success?
  
  In addition to the suggestion of BurrWalnut you can see the methods below.
  
  Method 1.
  You may have set the taskbar to auto hide, check the settings below:
  a. Click Start and select Control Panel.
  now, (b) go to the menu bar of tasks and put in service and click on it.
  C. on the taskbar tab, check if there is a check mark next to auto-hide the taskbar.
  d. If there is remove it, then click on apply and then OK.
  
  Method 2.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts and check if the problem still persists.
  For more information, see the articles below.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP ENVY 750-175se: stuck on "Set up Windows" - fresh install of Windows 7

  Hello

  I have a new install of Windows 7 Ultimate 64 bit on my desktop HP Envy. I installed myself, everything went well. However, now when I am setting up Windows (on the screen where it says "Select a username for your account and your computer name to distinguish it from the network"), the keyboard nor the mouse work.

  The mouse on the background light is on and both work until I have start Windows (ie. the BIOS) and both are plugged into the USB 2.0 ports. I tried different USB ports around the system, but that did not work at this stage (well that as well the mouse and keyboard worked for the previous points of the facility before the restart brought me to this screen). I tried to disable Legacy Support in the BIOS, but that only returns an error message saying "Boot Device Not Found". I tried another keyboard that I know works on other systems, no difference here. I did research online that some users recommend using a PS/2 keyboard, but there is no port for a on this machine. I'm literally not to penetrate into my operating system, but none of the USB devices work. I've also seen suggestions about how to disable of EHCI or XCHI driver settings Pre-boot in the BIOS but I can't even find those on this BIOS. So maybe someone knows I am missing a setting in BIOS that can help me out here or something? Thank you!

  Hello:

  Here is what, in my view, the problem is...

  Intel has removed support for USB 2.0 chipset chipset Skylake.

  This means that only USB or normal DVD installs windows 7 will not work.

  Microsoft Windows 7 ISO not the USB 3.0 drivers natives either.

  Therefore, add USB 3.0 drivers in Windows ISO.    Intel has on it.  They have a utility that does all the work for you.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Run the utility and point your support Installation USB and windows 7 above should install.

  There is a readme on the link above for instructions on how to convert your DVD in a bootable usb flash drive.

• CD/DVGW SN - S082D question - Windows cannot start this hardware device Code 19

  I've had my laptop for a little over a year now and it's had its fair share of problems, which most is repairable or there is a solution.
  Earlier today, I inserted a disc in the drive and tried it opens, went into "My Computer" and find the disk was not displayed.

  It's happened a couple times and a simple reboot fixes the problem.
  I rebooted twice and this time, that the problem was not fixed, after going in 'Device Manager', I found there was a problem with the device and he gave me the following error message

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  As usual "search for the solutions" is useless and doesn't return any results.
  Thanks in advance for any response.

  Some info that may help
  OS: Windows Vista editions Home Premium
  Laptop model / number: Medion MD 98300
  DVD drive: TSSTCorp CD/DVD W SN-S082D ATA Device

  Thank you

  First of all, I wonder why you post this here in the Toshiba forum if you don t have a Toshiba laptop
  It's a little strange for me... anyway I'll try to help you.

  It seems that the registry keys are corrupt and so your CD/DVD drive does not work properly.

  Just try the proposed solution mentioned here in the doc of Microsoft:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• Windows 7 - preparation set up windows. Do not turn off.

  I got this new toshiba laptop with windows 7 and it starts up and started using it. activated the 30 days free trial norton, surfing the internet and worked on some pictures for my sister. When I went to close it it says something like "installation 59 updates ' he has done fast enough, then it turned off. I went to meet my sister and when I turned on the laptop, he said 'preparation set up windows. do not turn off"he was stuck on this for hours, about 2 or 3. I thought that maybe he was stuck so I turned it off. I turned it back and he was still stuck on this same configuration screen. I turned off then turned it back and went into safe mode. I did a restore to before the updates 59 which was only a few hours earlier. I restarted the laptop and it looked pretty good. then I noticed he was saying something about the norton is maybe defective. he wouldn't let me turn on the antivirus and firewall. he wouldn't let me enter the network. I can't get on the internet basically can't do anything. It seems to work, but it is not. now, whenever I stopped it it starts to install the updates and when I start it again, it goes to the preparation set up the screen. I even left it for a day and a half on the screen configuration and nothing. What is the problem with my laptop brand new?

  Usually a single word explains what causes these problems - Norton !
  Is the laptop still under warranty? If so, Toshiba needs then provide support for problems with the operating system.

  Instead of contact Toshiba, then through the dance where they try to blame Microsoft and will not help you, if the laptop is a recent purchase so I suggest you press on press F8 key just after you press the power button.
  If you do not press F8 in time then Windows 7 will attempt to load and you will have to wait until she did try to do.
  Shut down the laptop and reboot again, by pressing F8 to only a Boot Menu appears.

  In the upper-left corner of the Start Menu should be a link to repair your computer .
  Choose this option.
  The System Recovery Options window should now appear. This is what it will look like - What are the system recovery options windows 7?
  At the bottom of this list there should be a Toshiba provided option that will allow you to do a clean/restore Windows 7 install.
  If she's not here so Toshiba should have provided you with a recovery with which disk you can boot up the laptop and then access the system recovery.

  Do a clean reinstall of Windows 7 (a format of the hard drive) and the installation of Windows 7.
  Once you have done this, and the system has rebooted for the last time, uninstall all Norton products immediately by clicking on the start ORB,
  in the field of research to install type.
  Under control panel, click on the link "view the programs that are installed on your computer.
  After you have uninstalled the Norton "tricks", restart the system.

  Update the computer laptop now, install the updates offered in groups of 10 only ! Yes it's more slow their installation at once, but... you already know the result to install all updates at once, right?

  When all updates and required reboots are finished, suggest you only install the freeMicrosoft Security Essentials or Avast.
  Both are valid antivirus programs, and both are compatible with Windows 7.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• 20/01/11 Windows preparing to set up Windows

  Last night all our Win 7 Machines did an update and it takes me to restart the computer, once we rebooted the systems that they all were stuck to prepare to set up Windows screen for more than 6 hours, I could understand 1, but so far we have 6 systems, in doing so, we are a fraid to do the rest because of this problem ideas or suggestions? It maybe SP1 that I've heard, but I'm not sure.

  Any help would be great - these machines are machines of IT technology too - we are lost without them.

  Thanks - Chuck

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft