Help to configure SSL on router RV220W

Similar Questions

• HOWTO configure SSL VPN router Cisco 1941?

  Hello.

  How to configure SSL VPN on a router Cisco 1941? I would like a howto guide that is step by step. I've found myself so far.

  Best regards Tommy Svensson

  Here are a few links that might help:

  http://www.Cisco.com/en/us/products/ps6657/prod_configuration_examples_list.html

  http://security-blog.netcraftsmen.NET/2009/02/Cisco-IOS-SSL-VPN-example.html

• HP C4580 not scan to PC. I need help to configure my Netgear router please :)

  Hello

  I've read here, the threads that talk about this printer prints only not to or from a PC - my problem is that the C4580 go scan from my PC, but will not scan to PC.

  I found an answer from someone who has had the same problem earlier this year, but I do not understand what to do.

  Here's the answer:

  "I have ordered mine entering the settings from my router (Netgear) page and setting the built-in firewall rules. "The internal firewall was blocking the printer, I could print, scan using the computer, just could not scan from the printer to the computer.

  Also, I have a Netgear router, but could do with help on how to do the same thing as the person above.

  Thanks in advance for any help!

  Sorry, I don't need help after all

  It was not the router requires a configuration, it is the firewall that was a block that should be changed to "allow".

  My "all-in-one" now does everything it is supposed to do

• Help to activate SSL VPN router Cisco 1941

  Hello.

  I have a router Cisco 1941 and want to activate my SSL VPN license on it. How can I go about it?

  Best regards Tommy Svensson

  Hi Tommy,.

  Please try and download the PDF of the same link.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this message as answered if you feel that your request is answered. Note the useful messages.

• SSL VPN may be configured on the router from Cisco 881/K9?

  I'm now confused if SSL VPN can be configured on the router from Cisco 881/K9.

  Please someone advise me.

  If Yes, for only 5 users, what I need to buy the license or license is supplied with the router?

  Thank you.

  Yes, and you need a license:

  FL-WEBVPN-10-K9

  License SSL VPN functionality for up to 10 users (incremental), to 12.4 T based only IOS versions

  FL-SSLVPN10-K9

  License SSL VPN functionality for up to 10 users (incremental) for the only based 15.x IOS versions

• I can't delete the properties of the proxy server on my HP G60 Windows Vista laptop. Need help to access my wireless router.

  I'd appreciate any help or information that may help me set my Internet Options on my IE LAN settings. The configuration that I need to adjust consists of set the network settings on Auto instead of the designated inputs.

  Hi JoseGarza,

  You can follow these links to configure the wireless router & check if it helps.

  Set up a wireless router

  Setting up a wireless network

  Hope the helps of information.
  Please post back and we do know.

• Configure SSL for OUD 4444 port Admin port-> replace the self signed certificates used

  Hi Experts,

  When installing OUD choose Certification self-signed for ports 1636 and 4444.

  Later I change the certificates used by the port of 1636 to a new key file containing the CA certificates. (Track the steps of: https://docs.oracle.com/cd/E52734_01/oud/OUDAG/security_clients_severs.htm#OUDAG00050)

  But same procedure does not have to replace the self signed certificates used by ports 4444!  Everyone is configured SSL (with Cert CA) on the Administration port?

  I couldn't even start the servers, you see an error:

  """

  category = gravity CORE = NOTICE msgID = 458891 msg = the directory server sent a notification to alert generated by the class org.opends.server.core.DirectoryServer (org.opends.server.DirectoryServerShutdown alert type, alert ID 458893): the directory server started the shutdown process.  Stop was launched by an instance of the org.opends.server.core.DirectoryServer class and the reason for the closure was an error occurred trying to start the directory server: NullPointerException (File.java:277 AdministrationConnector.java:843 AdministrationConnector.java:675 AdministrationConnector.java:182 ConnectionHandlerConfigManager.java:356 DirectoryServer.java:2932 DirectoryServer.java:1584 DirectoryServer.java:10108)

  «[27/sep / 2015:06:22:53-0400] category = gravity = NOTICE msgID = 458955 msg = the directory server CORE is now stopped "«»

  Post edited by: 1976902

  Sorry, I cannot help here - here are a few possibilities.

  Change connector Administration certificate

  https://docs.Oracle.com/CD/E52668_01/E54669/HTML/ol7-genssc-auth.html

  The failure of the handshake could occur for various reasons:

  • Incompatible encryption suites in use by the client and the server. This would require the customer to use (or allow) a suite of encryption supported by the server.
  • Incompatible versions of SSL in use (the server can only accept TLS v1, while the client is capable of using SSL v3 only).
  • Incomplete trust for the certificate of the server path
  • The certificate is issued to another area.
  • incomplete certificate trust path between the certificate for the server, and a certification authority root.
  • In most cases, this is because the certificate is not present in the trust store

• How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  How do I know if my router has been compromised if a hacker does not any change in the configuration of the router?

  Do you know how to access the Linksys configuration screen?  Click Administration.  You should be able to access the logs from here.

  What happens if they have an older linksys router?

  

  Click on the Windows "Start" button and select "All programs." Click on "Internet Explorer" to open a web browser.

  Type "192.168.1.1" in the address text box and press "enter." This IP address is the default value for a Linksys router. If you have reprogrammed the router to have a different IP address, enter your IP address instead.

  Click the log tab

  model # here

  http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

  192.168.1.1 is an IP address that is normally used by the routers broadbandfrom Linksys.

  If the router has an IP 192.168.1.1, you can connect by opening a Web browser and visiting

  http://192.168.1.1/

  This allows to connect you to the console of the router administrator and access its configuration screens.

  http://compnetworking.about.com/od/routers/g/192_168_1_1_def.htm

• I need help for configuring security for my wireless again.

  Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.

  original title: Wi - Fi Protected Access

  Hi dmcangus,

  See the Microsoft articles below for more information on WPA wireless security.

  Configure Security Wireless WPA for home networks

  http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security

  Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP

  http://support.Microsoft.com/kb/815485

• "Printer settings not comply with the configuration of the router.

  Hello

  I'm trying to establish a wireless connection with my printer to my computer, but the answer above, "printer settings not comply with the configuration of the router" someone has the solution please. Peter

  Hello

   
  • What is the brand and model of the printer?
   
  You can check this link:
   
  Network printer problems
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
   
  I also suggest you to check the manufacturer support for assistance to correct the settings of the printer.

• [WLS 10.3] Why I didn't "Use SSL JSSE" (Server-> configuration-> SSL)

  WebLogic Server version: 10.3
  
  Why I didn't "Use SSL JSSE" (Server-> configuration-> SSL)

  Because you're using WL 10.3?

  The feature is available in 10.3.3 (version 11g)

• Configuring SSL for the server SOA

  Hi all
  
  I am wrkin on SOA suite 11 g. I'm tryin to implement transport-level security. All first authentication 1-way and 2-way mutual authentication. For this I have to activate the SSL for the SOA server that is managed by the administration WLS server. According to my knowledge the WLS comes with demoidentity and demotrust keystore. If I need configure SSL for server SOA do I need to create a new keystore and CA, s, or I can use keystore demo.
  
  Now, in case I need to create a new keystore that can I do the same thing using keytool utility. Also, is it possible to do this using keytool utility? If Yes, please provide me with some links on how to do the same.
  
  Thanks in advance.

  Hi Shlomit,

  If I need configure SSL for server SOA do I need to create a new keystore and CA, s, or I can use keystore demo.

  You can use the keystore Demo dev purposes, but it is NOT recommended to use demo keystore for use in production.

  in case I need to create a new keystore that can I do the same thing using keytool utility

  Yes, you can do this using the Keytool utility.

  is it possible to do this using keytool utility?

  In fact, you can generate a self-signed certificate and use it as a certification for CSR signing authority.

  Please provide me with some links on how to do the same thing

  You should get everything here-

  http://download.Oracle.com/docs/CD/E14571_01/Web.1111/e13707/SSL.htm#i1200848

  Kind regards
  Anuj

• RE: router wrt310n - need help for configuring wireless security

  I can get wireless if the router is not secure, but cannot configure wpa and wireless security.  Instructions followed on linksys tutorial but still connect wirelessly if I select wpa security.   In addition, I can't find a way to change the ssid, the pages of router do not match documentation.  The version of my router is v1.  Is this obsolete, I know that there is a v2.  Any help will be appreciated.

  Please follow these steps to configure the wireless settings and try to connect to the wireless network.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Fix the Radio band to wide - 40 MHz and change the broad Channel 9 and channel Standard 11 - 2, 462 GHz... Wireless SSID broadcast should be enabled, and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304 change the RTS threshold to 2307 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

  IF YOU ARE NOT ABLE TO CONNECT TO THE RADIO

• Help to configure the router Cisco 1941

  Help!

  I just bought a router cisco 1941, I understand, it came with the Cisco CP, but I don't know how get you to the part where I can use it.

  Also, how can I connect to the router directly without using the HyperTerminal console, all I want to be able to do is configure the address IP of the ISP and my IP address so I can use it for surfing the internet.

  Help, please.

  Hello

  Thanks for the screenshots and show the output! You will need a few lines of command for CCP to work:

  Configure the terminal

  username username privilege 15 secret PASSWORD

  IP http server

  local IP authentication

  Sent by Cisco Support technique iPad App

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83