Help to port E3000 forwarding

Similar Questions

• Help to port RV042 forwarding

  Hi and thanks for reading this. My VPN router works well but I just need to make sure that port 8443 is forwarded so that my customers from outside my office/domain can access my Web server to generate reports. I have already connected to my router and entered my IP address of the web server with the port enabled in the port forwarding section range. It is said: secondary https [tcp/8443 ~ 8443]-> 192.168.xx.x

  It is activated and I saved the day. Everyone in my office and the server can display this site very well but can my clients outdoors. What gives? I really try hard to understand but I have developed with nothing. Any help is greatly appreciated.

  Hi niospecv and welcome to the homepage of Cisco community!

  The RV042 now reports to the Cisco Small Business Support Community.

  For discussions concerning this product, please go here.

• WRT54GL Port Range Forwarding?

  Hello. In Port Range Forwarding, there are only 10 lines (konfigurating 10 different ports.). What happens if you need to pass more than 10 ports?

  Installation of the 3rd firmware like dd - wrt or tomato.
  Of course, you should not need so many expeditions in the first instance.

• Please help me port an android application BlackBerry App. How to wear an android app to a BB app

  Please help me port an android application BlackBerry App.  How to wear an android app to a BB app

  The best way is to follow this start: https://developer.blackberry.com/android/documentation/gettingstarted.html

  Using Eclipse to develop the Android app?
  -> Then follow this guide: https://developer.blackberry.com/android/documentation/install_plugin_prerequisites_1895476_11.html

  It's a time to port (you do not plan on the continuation of your request later)?
  -> Then you can use the online tool to make your application: https://bdsc.webapps.blackberry.com/android/bpaa/

  Otherwise, you can use the command line tool (https://developer.blackberry.com/android/documentation/preparing_android_apps_for_bbtos_1729415_11.h... or the graphical help of BlackBerry)

  If you encounter problems, poster and we'll try to help as much as possible you

• Help to port forwarding

  I recently installed an ASA5510. I need to pass certain internet traffic entering a few internal as servers below:

  These 3 are already configured with NAT and security policy via ASDM.

  TCP-smtp of 66.66.66.66 traffic goes to 192.168.1.16

  TCP-http 66.66.66.66 traffic goes to 192.168.1.16

  TCP-https 66.66.66.66 traffic goes to 192.168.1.16

  However, I'm not sure how to do the following, as it does not overlap the 192.168.1.x subnet:

  the TCP-pptp 66.66.66.66 traffic goes to 192.168.1.10

  Gre47-IP of 66.66.66.66 goes to 192.168.1.10

  where 66.66.66.66 is part of our external subnet.

  static (inside, outside) 66.66.66.133 tcp smtp 192.168.1.16 smtp netmask 255.255.255.255

  static (inside, outside) tcp 66.66.66.133 192.168.1.10 pptp pptp netmask 255.255.255.255

  list of extended outside access permit tcp any host 66.66.66.133 eq smtp

  list of extended outside access permit tcp any host 66.66.66.133 eq pptp

  outside access-group in external interface

  clear xlate

  It should work how you got it.

• Help with ports BEFSR81 V2 has become inactive

  I have the BEFSR81 V2 and every day at least one of the ports become inactive and the router must be unplugged and plugged in again to reset the ports. In efforts to try to help this problem, I was going to upgrade firmware version 2.44.2 to that on the 2.45.10 site, but when he got download I get a consignment to the model error on upgrade end file. Can someone let me know what happens if there is a problem with the router ports go out or the update of the firmware will fix if all goes well this issue and how to get the firmware updated

  Thank you for the help

  Before trying to upgrade the firmware again, please reset the router by pressing button reset for 40 to 50 seconds long. This should help make the firmware upgrade a success. If it is not always works, try to upgrade the firmware using a tftp utility instead of the router interface based on user's web. The tftp utility can be downloaded from here. Please download and save the IRB on your computer. Once it is saved, run the .exe file. It will ask you the router's IP and password, and then select the file. Select the downloaded firmware file and see if it works.

• WRT56G2 static IP Port and forwarding

  Hello people,

  I just installed Linksys WRT56G2 and the wifi works. I managed to send a few ports for my machine for applications and games. However, I always use this address IP special so that I don't have change the settings everytime I connect.

  I used a Netgear router before and there was a possibility to map a particular to my MAC address IP address so that the IP is reserved for me. I wonder if there are similar functions in WRT56G2, and could someone tell me how to do it if there is? I heard there is also a way to set up your computer so that it always uses the same IP address. Although it is less preferred (because I use different wifi in different places), could someone please also tell me how to do if the first way is impossible?

  Thanks for any help in advance.

  omnific

  If you are talking about a DHCP reservation using your computer that will always get the IP value automatically. But your dosent Linksys router feauter is installed. So the only option for you is to assign a static to your computer IP address whenever you are connected to your home network.

• Help Server port security...

  I have install a VMware View virtual security server in our environment.  I install a second vSwitch use DMZ on the host computer and it gave a new group of ports for use of the DMZ.  Security Server VM uses the new DMZ port group.  I have that a dedicated server will switch to DMZ, then back to the DMZ port on our firewall.

  Our firewall is managed by our ISP (I'm a one man IT Department in a large (for a computer scientist, in any case) environment so it helps me to deal with other tasks).  After talking with them several times, they assure me that everything is configured correctly so that there must be a problem with my VMware setup which I don't see.

  I have an external IP address dedicated to security server I've had linking an internal IP on a DMZ subnet dedicated by the first paragraph.  I open ports UDP and TCP 80, 553-4172 for security server and also to pass these same ports on our view connection server that is located on our private network.  (I've changed port 443 by default to 553 as my original thought was that something must be blocking 443 on the side of VMware)

  I am with them in that port rules are simple to set up-side firewall so I do not know there is no problem, especially after talking with four different technicians who all looked Setup and confirm that it was accurate.

  If I do a scan of port of the outer harbour, 4172 appear as being open, but when I scan port 553 it is closed.  This drives me batty as it doesn't seem to be much to screw - up in terms of setting this up.

  I'm also curious how to require the use of RSA devices only for the customers who connect throug Security Server.  If I place a replica of connection to the server, will not be the same configuration be used on both servers, which means that I couldn't activate RSA on the other without having to be on the other?

  Thank you!

  Hi dyeltonDC,

  I guess you did a lot of configuration errors including an ExternalURL.

  Please go through this doc and video http://communities.vmware.com/docs/DOC-14974

  Clearly, this article explains how to configure PCoIP Secure Gateway and desktop access other components using Protocol PCoIP external network.

  Have alook at www.vmware.com/pdf/view-46-architecture-planning. PDF page 60 for detailed deployment sight firewall rules all using DMZ

  Everything should work properly once you configure the display according to these guidelines.

  -Noble

• Problem LRT224 Port Range Forwarding

  Hello

  I have a new router Linksys LRT224 Dual WAN Gigabit. I want to allow traffic to be analyzed on port 9100.

  Connection accepted TCP 91.102.93.5:63261-> 192.168.0. 48:9100 on eth0

  I understand that it has accepted my request on port 9100 and sent to the 92.168.0.48:9100.

  But nothing happens. When I telnet to 192.168.0.48 9100 inside this works if the printer seems to work fine.

  OK, I found the problem. And it wasn't the LRT224. After reset of the printer, I worked :-)

• Need help ASAP Live mail forwarding rule all msgs

  I have several windows live e-mail accounts, business and personal. I created a rule to pass on what I thought, it was only a single e-mail account to my boss during his medical leave.

  I did, but all emails, the path back to 2007 and all my accounts retains in his mailbox. It keeps repeat and repeat. So far, he has received almost 1500 emails from my accounts.

  I tried to change/delete the rule, but I can't get the transmission to stop.

  Please help me before she gets fed up and dismisses me!

  Hello

  Thanks for posting your query in Microsoft Community.

  I can certainly understand the situation, you have to be in good and due to the rule not deleted/canceled and I'll be happy to answer your query.

  • What exactly happens when you try to edit/delete the rule?

  Try the following steps if you have not yet tried and check.

  1 start Windows Live Mail and sign if requested.

  2. in the menu bar, click the Folders option.

  3. click on the option of Message rules on the left side.

  4. choose rule e-mail that you want to edit/delete your messages.

  If the problem persists, you can try to repair Windows Essentials program as it may be damaged.

  1. click on the Start menu.

  2. click on Control Panel.

  3. click on programs.

  4. click on programs and features.

  5. search for Windows Essentials on the list and select it.

  6. click on Uninstall/Change.

  7. click on fix all programs Windows Essentials.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• With the help of port security with Failover PIX

  Hello

  I want to configure port security on a switch in which a pair of PIX failover are configured. However, after

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/cat6000/12_1e/swconfig/port_sec.htm

  It seems that this is not possible due to the PIX swapping MAC addresses: "If a workstation with a secure MAC which is configured or learned about a secure port address tries to access another secure port, a violation is marked."

  Does anyone know of a way around this?

  Many thanks in advance,

  Matt

  Hello Matt,

  Unfortunately it not there no work around to your problem.

  Thank you

  Renault

• Help car game: move forward compared to changes of direction.

  Hey,.

  I was wondering how I can determine which coordinates my car needs when I press my keyboard compared to the directions that the car steers on-site.

  Basically, when I have the car I want to always move forward after that I flew.

  Here is the function that already, I have prepared:

  
  
  
  public function actions(event:Event):void {
  
  
  
  
  
  
  if (upKeyDown) {
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  }
  
  
  
  
  
  
  if (rightKeyDown) {
  
  
  
  
  
  
  
  
  this.rotation+=steering;
  
  
  
  
  
  
  }
  
  
  
  
  
  
  if (leftKeyDown) {
  
  
  
  
  
  
  
  
  this.rotation-=steering;
  
  
  
  
  
  
  }
  
  
  
  
  }
  
  

  Look for the line where it says:

  velocityX = Math.sin (this.rotation * Math.PI / 180) * speed;

  This velocityX (and velocityY) is used in the enter_frame function to set the position of cars on stage

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Port forwarding works not, help

  I have a string of teracom TCW120B controller and I want to remote control. Those of teracom gave me the following response to configure the router:

  "Is there a router between the controller and the device? If there is a router, it should do the port forwarding.
  http://212.25.45.120:81 /.
  http://212.25.45.120:82 /.

  These two devices are in our office. I have forwarded port 81 of our router (with the real IP 212.25.45.120) to port 80 (http protocol) to the ip address of the first unit.
  The 82 port is forwarded to port 80 on the ip address of the second device. »

  I can not I put the lan router you can order Remote control TCW120B.
  Please help me with this problem.

  Ignore the Wi - Fi Protected Setup button if your wireless network is already reached.

• Problem with Port Forwarding (When PPTP is upward) in the WRT-160N

  Hello world!

  I'm looking for more help with Port Forwarding in my new Linksys router. I bought the daysago afew router and was pretty surprised when I discovered that there is no DD - WRT firmware is installed in it (the router was 100% NEW when I bought it). I downloaded latest firmware original and flashed Linksys file successfully.

  But I still have the problem (even that I was on DD - WRT firmware too) with the port forwarding for my DC ++ and Vuze (app from torrents): I wrote port forward for ports 49151 (for Vuze) and 4000 (for DC ++) to pass on to my desktop computer (IP 192.168.1.201) - I saw a post on this forum, that there could be a problem If you transfer to an IP address, which is within the local area of DHCP, so I forwarded to IP.201 (my local DHCPzone is 192.168.1.100-. 149) But does not forwardind (())

  What's wrong?

  My configuration:

  Router IP: 192.168.1.1

  PPTP (I my ISP)

  IP address: 192.168.226.127

  Default gateway: 192.168.226.2

  DNS 1: 192.168.1.1

  2 & 3 DNS: 0.0.0.0

  The IP address of the PPTP server: 192.168.226.2

  User name: *.

  Password: *.

  _____________________

  Simple Port Forwarding:

  Name of the external port application port internal protocol for IP address Enabled

  Vuze 49151 49151 times checked 192.168.1.201

  DC 4000 4000 checked two 192.168.1.201

  As you mentioned in your post that your ISP has provided you with a PPTP connection with an IP address: 192.x.x.x. The IP address that is provided by your ISP is in a private beach, and if you try to transfer all the ports on your router, it will not work, as long as your ISP modem is blocking this port. If you need get a public IP address from your ISP.

  As you get Private IP of your ISP, if this connection is called as NAT behind NAT and your Modem behaves like a router.

  So now you have 2 options, get the public IP address from your ISP or change the type of connection.