WRT56G2 static IP Port and forwarding

Similar Questions

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• Can you is more middle - click on the buttons back and forward to open the most recent last/next page as a new tab?

  I use Firefox 26, and I remember at some point in the past you could middle - click on the buttons back and forward to open the most recent last/next page as a new tab. Now, it does not work. I have not changed anything else on Firefox I know works, so was it gradually as keyword.url or is this something else?

  ... OK, this is weird. I restarted Firefox in safe mode and the reworked for/back Middle-click, so I thought it was one of my modules. Yet once, I opened Firefox in normal mode... and Middle-click works.

  I have no idea.

• my phone has port and new battery and still will not hold a charge

  my phone has port and new battery and still will not hold a charge

  What do you mean 'there port and new battery? If someone other than Apple has opened and replaced the things, it is now unbearable.

• my macbook pro red on heart Tel port and no sound, what I can do to fix

  my macbook pro red on heart Tel port and no sound, what I can do to solve?

  The red light in the headphone when your Mac is convinced that he took an optical connection via this port.

  You need ti insert and remove the headset plug a dozen times to convince him to change the setting of metal cap and disable Optics (the red light is the optical sound).

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• I have upgraded to 4 and no longer have the drop-down list next to the icons of the arrow in the address bar that allows me to jump back and forward through Web pages I've visited.

  I've updated it Firefox 4 today and I no longer seem to have to drop the box that used to be next to the arrow icons that you use to move backward and forward between Web pages. It is one that allows you to skip the pages you have visited.

  Right click on the previous/next buttons.

• H8-1223: card mother HP Angélique Label of ports and diagram

  Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case.  The problem is the case connectors are labeled, but aren't the ports on the motherboard.  I need to have the labels on the ports and connectors of my Board of Directors.  The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset.  I need information on the place where to connect or if these connectors at all.  I'll try to send some photos if I can understand how this Bluetooth to my cell phone.

  

  On the left is the cornerstone of HP mother.  I wanted you to see the ports that are on the map. PSWD HP LPC.  The line is the Corsair Obsidian Series 350 d connectors.  How can I connect these?  Or do I really need them?

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• Satellite A300 - USB port and fingerprints issue

  Hello

  I'm starting this thread that I have problems with my fingerprint reader and my USB port.

  I have a Toshiba Satellite A300-C01 laoptop. It was purchased in September of last year. I have not used it much except for the first week I had it, I've been away (Overseas), and I didn't take my laptop with me (I took a former I). There is no chance that the laptop has been used so that I was absent because I live alone and that the cell phone was simply sitting in the computer room.

  I started using it again about 3 weeks. Around a week ago, I noticed a pop-up (bottom left of the screen) telling me that a USB port had problems. I put my FlashDrive on the first USB port and at first, it was not recognized. I tried with another flash drive I have and who has been recognized. However, every time I start the computer I get who pop up telling me that there is a problem with the USB port.

  I also met a problem with the fingerprint reader. A pop up appears in the lower left side of the screen and say that the fingerprint reader was having problems. Happened since then that the problem with my USB port began to appear. About an hour ago, I checked the Device Manager and the fingerprints fingerprints/biometrics scanner does not appear in Device Manager.

  Has anyone else had this type of problem?

  What did you do to solve it?

  I would appreciate comments that I have no other choice at this time until Monday when the Toshiba support is available (they are available Monday to Friday).

  Thanks in advance,

  Deanne.

  First of all, you should try to update the chipset drivers and software of fingerprint. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn't work you should try to update the BIOS. Check the Toshiba site for an update.

  In the worst case, you must reinstall the laptop with the Toshiba recovery disc. So you can make sure if it s a hardware issue or not.

• Hi, I just bought a macbook pro 13 ", however it has no ethernet port, have I need to buy a device of air port and what one do need me?

  I just bought a macbook pro 13 ", however it has no ethernet port, have I need to buy a device of air port and what one do need me?

  Your MacBook Pro has built in WiFi.

  Wi - Fi

  802.11ac wireless Wi - Fi network; IEEE 802.11a/b/g/n compatible

  It is the best way to connect. You will need a router if you don't already have one.

  If you want to use ethernet wire you can use this cable. ter http://www.apple.com/shop/product/MD463LL/A/thunderbolt-to-gigabit-ethernet-adap? fnode = 8 b See the following link for more useful information if you are new to Mac.

  Kim

• Is it possible to access the USB ports and a slot for card SDX?

  Is it possible to access the USB ports and a slot for SDX card at the back of the iMac?

  Rotate the iMac autour to see ports.

• MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

  I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Need help on the use of the PCI-6221 and c# to control three digital Port and an analog of entry

  I need to send the digital output at three ports and then read an analog input voltage using the analog card PCI-6221.

  I did a c# program to fight against it. I built four tasks altogether. Three tasks for three digital output ports and a single task for analog input.

  How can I reduce the time?

  Using my method, to 3.3ms in total. And it's slow.

  I can build one task for three ports?

  What is the best way to the control task to reduce the time of communication with the PC?

  Is that possible to save a lot of analog reading entry in the memory of the DAQ hardware and then read it all together from the computer in order to reduce time consumption?

  1 million thanks!

  Hello

  Hi Jin,

  To answer your questions, Yes, you are able to configure a task of digital output to use three output ports and PCI-6221 has a buffer of memory FIFO aboard 4095 samples.

  I would like to direct you to the example of NOR-DAQmx for c# files located in the following location on your computer

  C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DotNET2.0

   

  Here, you will find predefined examples in c# that should give you a good idea of how to go about architecting your code to achieve the results you need.

  There is also a useful help file which you will find by navigating to Start > all programs > National Instruments > NOR-DAQ > help of NOR-DAQmx .NET Framework 2.0

  I hope that this answer is useful.

  Best regards

  Steve H

• Pavilion a6120n: USB ports and slots memory card does not

  My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

  I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

  Here's what I've tried so far.

  Run antivirus software. Full scan & scan memory - no problem

  Don't scan complete malewarebytes - no problem

  I tried to reboot several times without success.

  Catering to several previous = failure restore points

  Computer restart in repair = failure mode

  Use the repair disk I did = failure

  Control the management of the power supply for each usb port see if power was properly routed = ok

  Removed the cover of the housing and carefully inspected the cables and connectors.

  Finally I tried to uninstall the drivers usb = failure

  After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

  Still no usb or memory card function.

  Any help would be appreciated

  Thank you

  MrBob38

  OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

  I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

  After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

  I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

  I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

  Thanks for the comments, and I consider this problem to be solved.

  MrBob38