Help users understanding and connection steps

Similar Questions

• Oracle UCM CIS - user authentication and connection to the virtual computer

  Hello
  
  I have a few questions. I'm trying to integrate the University Complutense of MADRID with my custom web application.
  
  (1) is it possible to authenticate users (password validation) if we use CIS to integrate. If this isn't the case, then if the server of the University Complutense of MADRID uses its own database backend and not no matter what LDAP for user management, must make us a call to the database table directly? Any idea on the table?
  
  (2) if I am trying to connect to a server of the University Complutense of MADRID that runs on a virtual machine, but in the local network, I always get an error like this.
  Failed to retrieve the configuration information for the content Terminal item. Permission denied. Address < < ip address > > ' is not an authorized remote socket address.
  However, if I connect to an instance of the AAU runs on a server instance, the same code is running.
  The server within the virtual machine console is accessible from my m/c through browser. So should I give access to this port to the socket connection 4444. Couldn't find anything on it. Any help will be appreciated.
  
  Thank you
  In depth.

  Hi deep,

  You can restrict access to the content server port 4444 using a filer of ip address in the /config/config.cfg file of

  There is a property called SocketHostAddressSecurityFilter

  You can for example set
  SocketHostAddressSecurityFilter = 192.168.1. * | 10.102.3.3 | localhost
  the list is led separate

  connections from addresses other than these raise the error that you have demonstrated

  Please consider maring this thread as answered if that solves the problem to help others facing the same

  Tim

  Please consider maring this thread as answered if that solves the problem to help others facing the same

  Published by: Tim Snell on December 15, 2010 07:57

• Locked user account and connect on demand

  Hi, any omniscient! :) I'm sorry for my bad English, but I have a question.
  
  Why is able to connect to an Application user using Builtin ApEx Authentication Scheme, when this user's account is locked? We see that in the ApEx 3.1, 3.2 (and I think, ApEx 3.2.1 has builtin regime too).

  As a workspace admin Home > Administration > manage Services > Set Workspace Preferences and ensure that the account Expiration and locking is set to enable.

  Scott

• How can I download the new update on my Macbook pro when the password is not working? When I connect to the Adobe site with the same user name and password it DOES not work. I don't understand why.

  So I have a macbook pro - and she advised me that I had to update my Adobe flash player. So I go through all the steps and I'm stuck at the last stage, where he asks me my user name and password. I go in there correctly - several times and it does NOT connect. He shakes to show that there's an error. Double check my file AND I go to the Adobe site to connect with the same information. and it works very well.

  WHAT IS THE PROBLEM? Help please.

  Could you please try ComputerName administrator as username and the password as password.

  I hope this works.

  Concerning

  Hervé Khare

• Pls Help, I forgot the connection user name and email of my CC details.

  No idea how I can track my CC username and email id login using my credit card and the details of the phone. I need to update my credit card and also need the information for future use. With so many emails and connections, its all messed up and can barely remember.

  Please provide your order #, addresses e-mail in a private message we would certainly help you with this.

• I was using Microsoft Fix and one of the messages for me was that "more than one user is currently connected to this computer"

  While checking on Microsoft 'Fixit' to see if everything was working OK, I got a message saying as follows: more o no user is currently connected to this computer. »

  I can't understand this because I am the only user on my computer.  No other Member of my family is using my computer, so can you help me this please?

  Thank you.

  Hi Deepak B,.

  Thank you very much for your help.  I did as you suggested.  First: the Safety Scanner did not find a malware, etc. on my computer, which is really good.

  Second - accounts - outside myself - on my computer. I was surprised to see there was a guest account as well as mine.  I now extinct 'guest account '.  I can think about is my daughter and her husband who make us visit once a year.  April, my daughter knows a lot about computers, so I think that it is the culprit!

  That is the problem solved, and I am grateful for your help.

  ElmGrove

• How to share an internet connection Wi - Fi, which requires the user name and password on a laptop computer of Windows 8 on a PC with Windows XP?

  I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...

  Hello Ashan,

  Thanks for the reply.

  You can try to follow the following suggestions to solve the problem.

  First, try to reset Internet Explorer and see if that helps.

  Reset Internet Explorer

  http://support.Microsoft.com/kb/923737

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Additional information:

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.

  (Also works for Windows 8)

  Updated a hardware driver that is not working properly

  To connect to the Internet

  http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• I try to get an update of the software update, but he kept saying ' this phone (Iphone 5 s) is not onger connected to the internet while I am using internet.» Please help me understand why.

  I'm trying to get a software update IOS 9.3 as reminded me. He repeated that "impossible because you are no longer connected to the internet while I am on the internet. Please help me understand why. I did it many times, but it's really annoying

  The iOS 9.3 update was pulled for iPhone 5s and older iPhones because of activation problems. He will be unavailable for the next few days.

• Connect you to Skype does not work with the correct user name and password

  I tried to login with my correct user name and password, but received the error: unable to connect to Skype.

  So, I reset the password and can log on the Skype website.

  Tried to connect to Skype and the same error: unable to connect to Skype.

  I use

  Mac OS X Version 10.9.5.

  Skype 5.8.0.1027.

  OK, I think I thought about it on my own. I had not used Skype for some time. I just DLed the latest version and here is my connection works fine. Hope this helps you.

• By mistake I disabled all user accounts and cannot connect to my dell latitude d610 laptop computer. Tried going into the bios and turning off everything, what does not work!

  By mistake I disabled all my user accounts and cannot connect to my laptop, the Dell Latitude d610. I tried to restart in all modes as well as rotating directors passwords and disable in the bios. Nothing works!

  Hi kathleenvickers,

  1. How you have disabled all the user accounts on the computer?
  2. What do you find in the login screen when you restart the computer?

  See the articles below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• Unable to connect to a dial-up connection does not require a user id and password.

  It's kind of a weird question.  I have a new vista machine, and a user must always connect to a Government to start the connection via modem.  In XP, we used hyperterminal and everything worked well.  As hyperterminal is not available under Vista, we spent some time trying to get the vista switched from work.  He composed, negotiates, but when it comes to 'verification of the user name and password' connection failed after that right.  He has not set password to connect, the password entered only after you connect and you select the option to connect.

  Now, I copied Hyperterminal from a XP machine and was able to connect.  But using hyperterminal, none of the shortcuts that I do can be used.  They all come with "could not read session file: c:\. "c:\session.ht".ht."  I changed the location of the shortcut, the location of the hypertrm.exe, departure to the target location, etc...  The only way to get a recorded session to run is to open hyperterminal, and then click file, open and point to the location of the session.ht file.  It works, I suppose, but its not just a lot more, especially since this is not until the last the default location that you opened a file from.

  Ideally, I would like to use the connection to start menu.  Is it possible to force the connection does not send a user name and password?  He always says "verifying username and password" even though I left the empty boxes.  Or is this another problem with Vista and dial upward?  Any help would be greatly appreciated.

  Thank you.

  I thought about it... a bit, I've found a workaround.

  You can call hyperterminal for the prompt, using:
  Hypertrm c:\myfile.ht

  You open hyperterminal as we are used to having open when you click the .ht file in XP.

  Knowing this, you can create a shortcut to hyperterminal which calls the hypertrm.exe AND the .ht file

  Mine is:
  C:\Windows\System32\hypertrm.exe c:\Windows\System32\ohip.ht

  Bloody Government and their former systems eh?

  I hope this helps!

  Dave

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• Client AnyConnect and connections without client hang for two users

  ASA 5525, v.19 9.1 (5)

  AnyConnect client 3.1.02026

  I have two users who are unable to connect through the AC client or no client via the web portal. The use of the client, it will get stuck in a loop of "check updates". On the portal, the connection will proceed to point "Cisco Secure Desktop validated successfully... Success... Reloading... Please wait. "Then it crashes here.

  This problem occurs for the user, no matter which company laptop it connects to. A help desk technician can use his laptop computer and connect properly, but she could not connect on his own laptop computer or on another laptop. (Same for the other user.) So the question does not appear to be linked to his laptop or the installation of the CA. (Helpdesk reimage her machine early in the process of solving problems before they realized that the question seems to follow the user.)

  I've updated the hostscan - no change in the results file.  Client and clientless connections seem to work for all users. We are puzzled.  Suggestions, anyone?  Thank you!

  The LDAP protocol must be people - Active Directory server.  Chances are the one who manages the SAA should have access at least to look at Active Directory to look that up.  If they are not they need.

  Of course, I don't know a lot about what you use the devices, but if you use ISE, there should be a type of device MNT (monitoring and troubleshooting) - collecting newspapers and, hopefully, they are sent to a certain type of overall collection of syslog (splunk?) tool.

  Otherwise, there should be a device called a CAM (Clean Access Manager) who collects newspapers - which can also be spread to a global tool for syslog - but with cam, you can pull reports from the output in a file delimited by commas (.csv) and pass through them that way.

  -The thing that annoys me, is he gets to two users any computer, they try to connect to any network to which they connect, and other users can authenticate and access network on these same devices.

  -That is why it is rather confused.  Pretty much saying, there must be something with:

  -the pool of intellectual property that they get an IP of

  -their powers AD

  -user name

  -something in this sense, if the information provided is accurate.

• When the adobe application manager loads up, enter user name and password, continuous coming unable to contact adobe, please connect to the internet and try again.

  When the adobe application manager loads up, enter user name and password, continuous coming unable to contact adobe, please connect to the internet and try again.

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• How to make a user able to connect only once? and how do I restrict a user authorized to vote only 15 candidates and the brand of vote count?

  Hello

  I'm just doing my project which is the voting system. So my first question is how to make a user or a voter can connect once only using their username and password? After that they brought their vote, they can not be able to connect to a vote. Here, the user name, I replace it with IC and the password I can replace the ID (student ID). Here is my code for the connection:

  <?php
  if(isset($_POST["submit"])){
  $user=$_POST['IC'];
  $pass=$_POST['ID'];
  
  
  $con=mysql_connect('localhost','root','pass') or die(mysql_error());
  mysql_select_db('ses') or die("Cannot select DataBase");
  
  
  $query=mysql_query("SELECT * FROM voters WHERE IC='".$user."' AND ID='".$pass."'" );
  $numrows=mysql_num_rows($query);
  if($numrows!=0)
  {
  while($row=mysql_fetch_assoc($query))
  {
  $dbusername=$row['IC'];
  $dbpassword=$row['ID'];
  
  
  }
  
  
  if($user == $dbusername && $pass == $dbpassword )
  {
  session_start();
  $_SESSION['sess_user']=$user;
  $_SESSION['sess_pass']=$pass;
  
  
  
  
  /*Redirect browser*/
  header("Location: main.php");
  }
  }else{
  echo "Invalid IC Number and ID Number!";
  }
  }
  ?>
  
  

  for the second question is how to limit a voter to vote only 15 candidates and counting of the vote that voters go? When the vote is made with 15, then the popup script appears informed that the elector make themselves with their vote.for this I use box as a method of voting and each checkbox have the id which is the primary key. I appoint the id as 'No' and set it as the primary key. Here is the code for voting:

  <?php
  $servername = "localhost";
  $username = "root";
  $password = "pass";
  $dbname = "ses";
  
  
  // Create connection
  $conn = new mysqli($servername, $username, $password, $dbname);
  // Check connection
  if ($conn->connect_error) {
       die("Connection failed: " . $conn->connect_error);
  }
      
  $sql = "SELECT No, Calon, ID, Jurusan, Image FROM candidates";
  $result = $conn->query($sql);
  
  if(isset($_POST['vote'])) {
      
  //get the ID value from the radio button form field and store in an array.
  $update_vote = $_POST['candidate_id'];
  
  //loop through the array and update the database
  foreach ($update_vote as $value) {
  $vote_sachin = "UPDATE candidates SET Undi=Undi+1 WHERE No=".$value."";
  $run_sachin = mysqli_query($conn, $vote_sachin);
  
  
      }
  
    header("Location:http://localhost/VotingSystem/");
  }
  
  
  ?>
  
  
  <form method="post" id="form1" action="main.php">
  <?php
  if ($result->num_rows > 0) {
  echo "<table border >
  
  
  <tr>
  <th>NO</th>
  <th>Candidate</th>
  <th>INFO</th>
  <th>Vote</th>
  </tr>";
  // output data of each row
  while($row = $result->fetch_assoc()) {
  echo "<tr>
  <td align='center'>" . $row["No"]. "</td>
  <td><img src=" . $row['Image'] . " width=120px height=150px></td>
  <td><br/>" . $row["Calon"]. " <br/>" . $row["ID"]. " <br/>" . $row["Jurusan"]. "<br/></td>
  <td align='center'><input type='checkbox' name='candidate_id[]' value='".$row['No']."'></td>
  </tr>";
  }
      echo "<tr><td></td><td></td><td></td>
      <td><input type='submit' name='vote' value='VOTE'</td>
      </tr>";
  echo "</table>";
  
  
  } else {
  echo "0 results";
  }
  $conn->close();
  
  
  ?>
  
  

  I hope someone can help me with this because I'm still trying to learn this by my own php code...

  Thank you

  # 1, add a Boolean column in the table (VoteSubmitted) and the value initially FALSE to follow if the user has already voted.  Check this field when they connect. If the field is set to TRUE, displays a message and cannot vote again. When they get it vote, update the field from FALSE to TRUE.

  # 2, I would like to do this with javascript to allow them to select all their candidates and submit once. You could start with something like this:

  Cut paste & limit the number of boxes checked script