Help WiFi profile!

Similar Questions

• Unable to connect to a network error - change wifi profile native default

  Unable to connect to my network. When I try to see my network it says wifi native default profile

  
  Original title: change the profile default native wifi

  Hello

  Thanks for posting your question on the Microsoft Community Forums!

  From the problem description, I understand that you can not connect to the wireless network.

  For a complete list of the steps to try, see the tutorial wired and wireless on this page.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Please help wifi does not not ACER aspire 4710g (wireless network card problem)

  Please help me

  C:\Users\ali>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt #.

  2

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Network adapter on Broadcom 802.11 g

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 318775098

  DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Broadcom NetLink (TM) gigabit Ethernet

  Physical address.... : 00-1D-72-1B-B7-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Anchorfree VPN #2 HSS

  Physical address.... : 00-FF-03-C6-CD-54

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card Anchorfree VPN HSS

  Physical address.... : 00-FF-EF-4A-57-34

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  C:\Users\ali >

  AWI

  There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

  I would start by removing the current driver of sifi and install the latest driver available.

  The IP address for the above connection is

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

• need help wifi not connecting

  I have and acer aspire E1 - 531 with atheros AR5B125, my computer wireless adapter whenever I connect wifi says limited access and preventing me from accessing internet. I tried to restart the network card, but he did nothing. I checked Device Manager and as my adapter teredo tunnel Microsoft generally has 10 code, all my drivers say it is fully updated, also idk if it is connected but have avast antivirus it says my firewall is disabled and it wont not put me on, can someone please help

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do last changes made on your computer before this problem?
  2. You are able to connect to the internet with the cable connected to the modem?

  A Code 10 error is generated in the Device Manager in one of the following situations:

  • Device Manager cannot start the device.
  • One of the pilots who needs the unit does not start.

  The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the error Code 10 can be a very generic message indicating some sort of unspecified driver or device problem.

  If it helps, try the methods and see them below.

  Method 1

  Step 1

  Try to run in the troubleshooter to build designated as network troubleshooting.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Step 2

  Try to update the drivers

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the problem persists, try to follow the steps mentioned in the following tutorial.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Additional information:

  You can also view the following link.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• need help WIFI... I can't access wifi...

  I'm of the India... model laptop .my is GSE B39SE... (64-bit windows 7)... This was bought in the Middle East... I formatted my laptop two weeks ago... now, I can't access WiFi... I do not have cd drivers for wifi... I visited the website of HP in the Middle East... and then select my model... and download driver taking care of all the wifi for my model... I tried all the drivers wifi as Ralink 802.11 b/g/n WiFi Adapter Realtek RTL8191SE 802.11b/g/n Wireless LAN Driver for Microsoft Windows Driver Realtek Local Area Network (LAN) intel pro... but still problem exists... Please help me... What is the exact model of the wifi pilot name?

  @sanu_kt,.

  Based on the hardware ID, the following driver should be what you need.

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61219.exe

• Helps WiFi password

  I need to reset my password for connection to a WiFi T61 on my phone. I forgot the original password, I put in place, and I can't understand how to reset. This is the feature of being able to access my camera on my phone.

  Im having no luck finding how to get back to zero. Someone at - it a preview?

  Hi Ericmacom,

  Here's how to reset your Wi - Fi connection settings to their default status:

  

• Need help creating automatic setup of WiFi for XP Win 7, etc... Get errors on XP

  I have 100s of Win 7 and Win XP computers and I need a way to automatically configure WiFi. Some will be made for students and others for personnel etc. I did hours of research on this mega and using a Win 7 PC to create export to a USB key that is susposed to work on all versions of XP upwards. But, of course, it isn't. This works for Windows 7 and Vista, but not for XP.

  Here's what I did...

  1 a tried using the XP "Wireless Network Setup Wizard" to my XP PC. But it is defective and not allow you to create an installation WITHOUT any encryption, of course it is not acceptable as our WiFi does not use it. We use a system of Access Point Aruba which forces authentication VIA AD/connection on the first attempt to navigate the web. No encryption AT ALL as much as the WiFi client installation is concerned. I also did a profile exactly as I want only it except that I put in bogus WEP settings so it creates the SMRTNTKY with the WSETTING file. WFC file in it and then edited the. WFC to remove file but then it wouldn't work which is NOT ACCEPTABLE.

  2 went to a Win 7 PC as it does from there is supposed to work on Vista and XP too and had no problem using the option 'Copy this network on a USB flash drive profile' and it works perfectly for Win 7 and Vista, but - error on XP with the following message...

  The wizard found no information needed to set up a network, or the information was not usable. Try to rerun the wizard to your original computer.

  After reviewing the files generated between the XP method to export a WiFi profile to a USB key and how to Win 7 well, I found the following differences, all related to security settings. Of course, it's a bug or a design defect and a BIG problem for the IT Pro.

  Here's what my two WSETTING. Resemble WFC files.

  For XP I have:

  
  
     
          011C0F3E-EB0F-46B8-BA95-267ADEA25EC3
          0B4E59B8-8317-46B2-B8C2-C46850162E6C
          The Microsoft Wireless Network Configuration Wizard
     
      Student
      ESS
      0
      0
     
          Open
          WEP
          12345
          0
          0
     
  

  For Win 7 I have:

  
  
     
          01BC3658-4F27-42D1-92F7-3F7CF581A75E
          0B4E59B8-8317-46B2-B8C2-C46850162E6C
          The Microsoft Wireless Network Configuration Wizard
     
      Student
      ESS
      0
      0
     
          Open
          None
         
          0
          0
     
  

  There seems to be ONLY two lines which differ between the two files and are as follows...

  For XP:

  WEP
          12345

  For Win 7:

  None
         

  As you can see that the difference is in the security settings that I don't use. (This is a choice made by the powers above me and I have to work with that. MS should keep in mind at ANY moment the IT pro should have the last say on optional parameters is NOT MS)

  It seems that Microsoft, when they created this tool never intended be used by computer professionals as they force the settings for the IT Pro to decide at ANY TIME, not Ms.  IE to use WEP/WPA etc, or NONE.

  So am I missing something? How do I create an automated way I can run thousands of times without error on XP, Vista or Win 7 to configure profiles WiFi which will have NO apparent safety, but who actually do?

  I would VIA reg setting if I knew where to find all the reg settings to do, but the hours of Googleing gave this info. Everything seems to point to the network VIA USB method profile, which would be perfect if it worked on XP. If there was a simple file I could copy from a master system of its many clones then it works. I could wrap it in one. BAT file or use INNO Script to create a file of configuration etc. Many ways I could do if I could find any files, settings, etc., I would need control.

  It shouldn't be rocket science. I've seen where Microsoft has said they recognize the need for professionals like me to be able to automate this process for any tech user, but then the tools thay do aren't for the professionals that they take away the option of PROFESSIONAL (on-site tech who knows the most, is NOT MS) to decide, using their knowledge intament businesses must make choices about the use or non-use of WEP etc (it's a theme common in MS assistants, just look at the hack job SYSPrep is based by default on the local Administrator profile profile, a MAJOR mistake and a security risk, rendering it useless in a corporate environment where the local Admin profile is preconfigured with options parameters, links, etc. to the things a pro IT does not that the general user to see or to do but they need on the local admin ONLY)

  Thanks for any help you can give.

  Ralph Malph

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads?sort=firstpostdesc

• Problem with WiFi of Smartphones from blackBerry to unannounced, need help

  Hi all

  I have a Bold 9000 with OS 4.6.0.303. I got it for 6 months and no problems so far. I have a Belkin wifi router at home that my BB to connect whenever I'm at home. However, since last week, it does not connect to my router. Nothing has changed in one of the configurations. I tried to delete this specific wifi profile from the BB and then add it back, and when I do, it says that it cannot obtain an IP address.

  My fiance has a curve 8900 and have no problem, it will always connect to the router with no problems. My "BOLD" connects without a problem on my device mobile wifi, and connected it to a restaurant without problem wifi hotspot.

  What can be the problem between my 9000 and my Belkin router.

  Thank you

  J

  I managed to solve the problem, I tried all the power cycling tips with no luck, so I restored the router to all factory defects and set up again. And hey presto, it worked.

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• How to delete a profile type wifi WPA2-Enterprise when delete is not available.

  I have a WPA2-Enterprise wifi Windows 7 type profile that does not allow me to remove it. The delete icon is missing and it is listed in a section of managing networks wireless named "Networks you can see." The property screen reads, "these settings are managed by your system administrator." I am the administrator of the system.

  It is a profile of wifi which at one point was configured as a WPA2-Enterprise type test, but has been restored to a type of WPA2-PSK. Not the wifi profile is unusable because it says, "the settings saved on this computer for the network do not match the requirements of the network."

  How can I delete the wifi profile and start over?

  You could try the netsh wlan command delete profiles...

  Here's the syntax...

  http://TechNet.Microsoft.com/en-us/library/dd744890 (v = ws.10) #bkmk_wlanShowProfiles

  http://TechNet.Microsoft.com/en-us/library/dd744890 (v = ws.10) #bkmk_wlanDeleteProfile

  http://sdrv.Ms/QPTtQY

  Go to Start and type cmd in the search line. Right click on cmd.exe and select run as administrator , and then run the netsh commands...

• How can I change the network to a WiFi connection profile in Windows 8?

  When I connect to a wireless connection, it automatically assigns me for the Public Profile. But, I know to trust the network and want to select it as private, so that I can use the share.

  In previous versions of Windows, it was easy to change the WiFi profile. For example, in Windows 7, I would go to the network share and click on the name of the profile, and it would allow me to change it. Now, in Windows 8, the profile name is static text and is no longer provides a link that allows me to edit the profile.

  I tried to remove the profile and add it back, using the context menu on the WiFi network and "forget this network". But he never asks on the profile or sharing when I add the network.

  Try this:

  -Show the charms

  -Select settings

  -Select the network icon

  -Right click (using a mouse), or press and hold (with your finger) on the name of the network connection, that you care

  -A menu will appear to allow you to control the sharing, so to go from a private and public profile.

• Internet Connection Sharing via Intel my Wifi

  Hi, I use Alienware m14x with windows 7 Home premium 64-bit
  I have just restored my laptop factory. Configure my wifi profile. When I click on share my internet it gives the error that has first of all connect to the internet. I am already connected to the internet, therefore a ground of firewall problem please help with a few problems of settings.
  Thank you.

  Hello SiddheshGajare,

  Which Wi - Fi utility you are trying to share the connection to help?
  It is perhaps that the connection is not able to share with other devices.
  You can look into trying sharing instead of use the Windows internet connection Wi - Fi connection utility:
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
  The instructions also apply to Windows 7.

• Windows 7 Networking Wireless - keeps his back I remove profiles

  Hello

  Just, I got my laptop working upgraded to windows 7 and am having major problems with the wireless connection.  So the first thing I want to do is to remove all profiles, but my main, if simple, go in manage wireless networks, click on a link then do a right click on it and say remove connection, then it disappears and comes back 2 seconds later.  The connection is 3000 miles away, so it's not finding it.  Also, when I reorganize, it changes it back.  Also when I reboot wireless is active.  I was competent in XP, but ready to throw computer laptop in the room.

  Help!

  Thank you
  Alison

  I also had the same problem as even after the removal of the wifi profile, it kept reconnecting to it.

  After reading this thread, I realized that it is not stored by Windows, but by managers of 3rd part wifi (in my case it's the Intel PROSet/Wireless connection utility) that automatically records all the profiles that you have (successfully?) connected to in the past.

  No wonder he's been create and put the other profile to use, as soon as my favorite network was temporarily not available. Just went in his management utility and changed profiles here. It works fine now. I think that most new computers come with such utility pre-installed on their computer now when you install the drivers.

  Just write here, so I hope that others might get a clue here as well and focus on something in this direction.

• Problem blackBerry Bold 9700 Smartphone WiFi grey

  I just had nine white bold 9700 yesterday Rogers Wireless and tried to configure the WiFi at home. I have BIS plan data and my laptop can use a wireless without any problem.

  The phone found my modem and I put the WEP password correctly but it shows white dash and wifi on screen displays gray icon.

  I spoke with Rogers support technique guys 3 times:

  First, they asked me to turn off the phone, out of battery and put it back, delete profile and reset, it does not

  second time: turn off my modem and it reboot, it didn't work nor

  third time: they asked me to download desktop manager and Pocket code file to reinstall the OS. But I found that the link they gave me is Manager Desktop 4.6 which is older than mine (the CD comes with the phone is 5.0.1). Office) I have my mobile Office Manager (Windows vista x 64) installed 5.0.1 via CD, and I've downloaded version 4.6 and installed on my desktop pc (windows XP). But I hesitated to connect my laptop to one of them to continue. I don't want to spoil my BONES cell. For me, it made sense for me to reinstall the OS and even down to the version 5.0 to 4.6.

  Right now I use my BIS data plan to do everything (check email, BBM so far). I searched other posts and tried other things like run diagnostics tests, turn mobile network off and turned off wifi, turn on again, remove the wifi profile, analyze again put it back, take out the battery. None of those who work. Wifi at the screen icon is still gray.

  Should I try to reinstall the operating system via the Desktop Manager? and what version should I try? Any other suggestions?

  Greatly appreciated any advice.

  Helen

  Finally, | got it worked!  Here's what I did:

  1 browser > options > browser configuration > browser - hotspot browser

  2 browser > options > General properties > default browser - hotspot browser

  3 manage connections > wifi options > highlight my network ssid, click menu > edit uncheck prompt before connecting

  4 manage connections > mobile network options > configure data services, FAST roaming

  5 with the power, take out battery and a few seconds, back, restart

  6 manage connections > turn off wifi, then put it again

  7 manage connections > wifi options > highlight my network ssid, click menu > tools wifi > wifi diagnostics > linking > png

  Then the brand corss changed to check the mark, everything is beautiful

  I don't know what steps to take it worked, and I'm newbie, don't know where is the gprs or GPRS. But I really appreciate people here who gives so much help, I just combine their advice and keep trying, got finally worked. I'm so happy, thank you again! Hope this will help others.

• I can't share my Wifi using Intel my WiFi utility

  I use ACER 4830TG more than a year & I am pretty satisfied. My problem is that I have a Nexus 7 (WiFi) & I used generally to share my wifi PC internet using my WiFi utility intel. But for a few weeks, I am unable to share my Wifi using Intel my WiFi utility. It shows always connect & disconnect info with in a few seconds. But if I share my Internet then it connect with my Nexus 7 & of course, I'm not able to use internet then. Need urgent help please. BTW, earlier, I tried intels new dashboard 15.1, but it does not support my WiFi adapter. So, I rolled back & connect with a common, but now I can't!
  My WiFi profile current settings:
  Security: WPA2-PSK
  Type of encryption: TKIP
  Filter network traffic: disabled
  DHCP and DNS server: enabled
  Default channel: 3
  No device is blocked!
  BTW, I used to connect to the same profile settings, but now it is connect any more.
  Need urgent help please

  Hi Ryan,

  Thanks for posting in the Microsoft Community Forums.

  I understand from the description of the issue, that you have problems with wifi on the Windows 7 computer connection sharing. I will certainly help you in this regard.

  I appreciate if you could help me with more information.

  -Don't you make changes on the computer before this problem?

  Method 1:
  Firstly I suggest to enable network discovery and check if this helps you solve the problem. To do this, please follow the steps below:

  (a) Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the navigation pane, click change advanced sharing settings.

  (b) to increase the profile of the current network.

  (c) click turn on network discovery, and then click Save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

   

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

   

  Method 2:

  I wish that you disable the Windows Firewall as well the antivirus temporarily.

  View items-

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Method 3:
  Also I suggest to run a network diagnostic tool and check the hope that will solve your problem.

  To make this problem troubleshooting, please follow the steps below.

  (a), click on Start > Control Panel.

  (b) click network and Internet, click network and sharing Center.

  (c) under network and sharing Center, click on solve the problem.

  For more information about how to resolve common network problems, please see the links below:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.