Help with... ERROR [BULK_ADD_REPLACE_RECORDS_0] - failure

Similar Questions

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

  Original title: help with error message... Please...!

  I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

  I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

  I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

  Moved from Vista programs Forum.

  You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.

• Help with error: "display driver stopped responding, but recovered."

  Hello

  First of all, my configuration is a Dell XPS 7100, Windows 7 Home Premium 64-bit, the Videocard Visiontek AMD Radeon HD 6850 w / 9.2.0.0 driver version.

  AMD Phenom II X 6 cpu.

  My problem is that when I try to play a game (more precisely: Minecraft, SimCity, World in Conflict, AOE3) under Windows, the screen freezes for 5 seconds then go black for 1 second then back to the top with an error message saying:

  Display driver stopped responding, but recovered

  Driver AMD display driver stopped responding and has successfully recovered.

  This started only after I upgraded my video card to an AMD HD 5670 to an AMD Radeon HD 6850 Visiontek, which, at the same time, I upgraded my power supply to a 500w unit as AMD recommends. After that that I've updated all my drivers, deleted and reinstalled the driver video and which did not help. I then searched in all the forums about this problem and found that it is more than likely a problem with Windows power management. So, I followed the instructions on the site to change the registry data to help with this. This did not work, the same problem at the same time. I then contacted AMD Support and fairly well, they told me that it is either the power supply or windows power management which was the cause of the crash.

  I am at a loss now, I know not what to do. I have not tried all the third-party programs to try to manage the power. But if someone has used one that works or has any ideas for me to try please let me know.

  Thank you very much!

  I found a solution that helps!

  Please make a backup of the registry before making any changes in it.

  When editing the registry go to:

  • HKEY_LOCAL_MACHINE
  • then the MATERIAL
  • then DEVICEMAP
  • then the VIDEO
  • in the 'VIDEO' file, there is an entry with the title: MaxObjectNumber - REG_DWORD
  • This has a value at the end that looks like 0 x 00000006 (6) or 0 x 00000005 (5)
  • Double-click MaxObjectNumber, and an edit box appears
  • put 0 in the given value, and then click OK.

  This will disable Windows GPU Timeout detection and recovery. That she has stopped crashing on me.  The only problem is that windows does not save it and it resets after that rebooting so it must be changed every time you start the computer.

  If anyone knows how to save the changes to the registry, I would be very grateful for your advice.

• help with error 16820

  help with 16820 error trying to update acrobat

  Looks like you have the Acrobat.com (AIR) Office application installed.  This application is no longer supported.  I would suggest you uninstall and just use the web interface (http://acrobat.com) go ahead.

  Sorry for the inconvenience.

  -David

• I have windows xp professional operating system at boot it stops with error disk failure (40) and will not start windows can help u

  If I press f1 it will then boot to windows, but I need to cure the problem with the disk error message

  Hello petertomblin,

  It seems that this message is coming because of settings in the BIOS.

  The computer has a floppy drive?

  If so, is it operational?

  Nevertheless, we want to get into the BIOS and disable the startup procedure floppy drive,

  It is this best with support of the manufacturer of your.

  PLEASE NOTE:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Best regards

  Matthew_Ha

• need help with error in Update window

  error 80096001 that is the message I get I can't update

  Hi SejB,
   
  Welcome to the Forum of answers Windows Vista.
   
  This problem may occur if one or more of the following conditions are met:

  • Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
  • Cryptographic services is set to disabled.
  • Other Windows files are corrupted or missing.
  • The timestamp signature or the certificate cannot be verified, or is incorrect.
  • The hidden attribute is set to the folder %windir%, or one of its subfolders.

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.
   
  Method 1: Rename the Edb.log file
   
  Rename the Edb.log file, and then try to install the program again. To rename the Edb.log file, follow these steps:

  1. Click Start, click run, type cmd in the Open box, and then OK.

     Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

  2. At the command prompt, type the following command and press ENTER:

  Ren %systemroot%\system32\catroot2\Edb.log *.tst

  Method 2: Set Cryptographic on auto Services

  Define Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:

  1. Start the Administrative Tools utility in control Panel.
  2. Double-click Services.
  3. Click Cryptographic Services, and then click Properties.
  4. Click Automatic for Startup type, and then click Start.

  Method 3: Reregister DLL files that are associated with Cryptographic Services
   
  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, click run, type cmd in the Open box, and then OK.

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

  2. At the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll
  output

  Note If you are prompted, click OK .

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  1. Restart your computer.
  2. Click Start, click run, type cmd in the Open box, and then click OK.
  3. At the command prompt, type the following commands and press ENTER after each command:

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note If you are prompted, click OK .

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  1. Restart the computer.

  Method 4: Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start, click run, type cmd in the Open box, and then OK.

  Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

• At the command prompt, type the following commands, pressing ENTER after each line:

attrib s h % windir %
attrib s h %windir%\system32
attrib s h %windir%\system32\catroot2
output

Method 5: Define a signature unmanned silent success strategy

1. Click Start, click run, type regedit, and then click OK.

   Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

2. Locate and then click the following key in the registry:

The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing

1. Right-click on the Policy binary value, and then click change.
2. The value data will appear in the following format:
0000 02

Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

1. Click OK, and then quit the registry editor.

Method 6: Clear the temporary file and restart the hotfix installation or the service pack installation
 
To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

1. Remove all tmp*.cat of the following folders:

   systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

   systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

2. Delete all the kb*.cat files in the following folders:

% systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
% systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

1. Remove all the oem *. * files in the % systemroot %\inf folder.
2. At the command prompt, type the following commands. Press ENTER after each command.

net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output

1. Restart the installation of the patch failed or the installation of the service pack.

Method 7: Empty the software distribution folder

1. Click Start, click run, type services.msc and click OK.

   Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

2. In the Services (Local) pane, click automatic updates, and then click stop.
3. Reduce the Services (local) window.
4. Select all the contents of the Windows distribution folder, and then delete them.

   Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
6. In the Services (Local) pane, click automatic updates, and then click Start.
7. Restart the computer, and then run Windows Update again.

You can also follow the link below:
 
You cannot install some programs or updates
 
http://support.Microsoft.com/?kbid=822798
 
I hope this helps.
 
Concerning
Rehman - Microsoft Support

• Help with error code 80072EFE

  I tried several fixes for Windows Update to work, but I still get the error 80072EFE code. Windows suggested going to a program called "Fixit", but when I click on it, another window pops up saying that windows cannot connect to this site. I'm not an expert, but would classify me as pretty good for solving problems, but this one left me speechless. I have not installed anything back to my computer. The last time that I could do a update 12/15/10. Help!

  ERROR_INTERNET_CONNECTION_ABORTED 0X80072EFE

  - You can encounter errors related to the connection of temporary when you use Windows Update or Microsoft Update to install updates

  What is the result of a security/antivirus installed (SS); It's current subscription; its definitions are up to date; has whatever it is detected the last time that the system has been analyzed for the presence of malware?
  Were there updates/updates recently installed for the installed AV/SS?

  Another aspect that may be at play here is the home network. The networked system via a wireless or wired router connection?

  This specific error may be temporary or, as has been the case in the course of the 4 or 5 months indicated by messages on this forum, it's a sign that malware prevents the system to connect to the update servers.

  The system is having trouble connecting with all the addresses of Microsoft.com?
  Suggest you see if the system can access the malware scanners online, such as these-

  ESET Online Scanner
  Windows Live OneCare for Windows Vista and Windows 7 security scanner (requires Internet Explorer 32-bit)
  Emsisoft Web Malware Scan

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Help with error code 80073712 with windows update...

  I have problems with fixing error code: code 80073712 in my windows update program... I tried to do the checksur.exe... and after having told me he found 10 errors... He only corrected a mistake and said its missing files to correct the other 9 errors it finds... I have over 3000 photos on the computer more than a ton of documents that was for my personal use and then my church congregation as well. The music I like to keep it on the hard drive and really don't want to lose to re - install windows to fix backup... would only store my documents and photos... as I tried to record my songs on a DVD that says that he accepts the mp3 files, but it didn't work... so I lost 3 DVDs, it took to keep the music... Are there other ways to solve this problem without having to save and not lose the files... I really need to keep most of them away to printing purposes and everyday... Thanks a lot for all the help that can be given.

  I already tried the methods of fixing this error code 2... None of them helped or solved the problem... y at - it something else I can do...

  I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...

  I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...

  You are missing a lot of critical security updates (especially if the updates published on 10 Nov 09 never installed).

  You don't want to switch to Win7 with the computer in its current state (nor would you be able to do, I think).

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  See...

  .. .you you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712":
  http://support.Microsoft.com/kb/931712

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help with error on blue screen under Vista 32 bit

  Had this message pop up several times. Any ideas?
  Thank you!
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: fe
  BCP1: 00000008
  BCP2: 00000006
  BCP3: 00000001
  BCP4: 867B 9000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini122811-01.dmp
  C:\Users\xxx\AppData\Local\Temp\WER-37955-0.SysData.XML
  C:\Users\xxx\AppData\Local\Temp\WERB24D.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
  and their forums (if any) for known issues.

  Check these KB Articles that "pourraient" apply.

  Stop 0xFE peripheral sleep or Hibernate with USB streaming output
  http://support.Microsoft.com/kb/974303

  "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
  use some USB AMD EHCI host controllers
  http://support.Microsoft.com/kb/982091

  ==================================================================

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================

  Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
  be a connected USB device and not a system USB device. And you can never really exclude drivers.

  BCCode: FE 0x000000FE<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

  --------------------------------------------------------------------------------------

  A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
  USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

  Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
  in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
  Special instructions. (Antivirus/antispyware/security programs)

  ----------------------

  Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
  devices.

  References to Vista also apply to Windows 7.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
  (can have zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =======================================

  After the above, attach a USB device at a time to see if any cause the issue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Help with error code: 80070490

  I had problems with my computer for quite awhile... I noticed my computer slows down to a snails pace recently and decided to check the updates. Apparently, updates important are not to proceed with the installation or something... I am sure, that's the problem with my laptop... but again once I'm not very good with computers so any help is appreciated... Thank you

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Tips from Microsoft is to do a Vista repair install:

  Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

  1. Close all applications and restart the computer.
  2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start
        Collapse this includes this image

        

        , and then type Drive : \setup.exe in the box to start the search .

        Note The Drive placeholder is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. Click Yes to accept the Microsoft software license agreement.
  7. On the which type of installation do you want? of the screen, click upgrade.
  8. When the installation is complete, restart your computer and try again to install updates.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is a good tutorial to read about a repair installation:
  

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• need help with windows update failures

  I'm really becoming disillusioned and anrgy. In the last 5 weeks or so I installed Windows 7 on at least 11 PCs,... and in all cases, bar 1, I am facing the same problem. I use the Start button, windows update to check for updates after a new installation, sometimes in a few seconds, I get the red error message, other times the normal practice of verification of updates begins. Invariably, nothing happens except the window Windows Update appears to 'disappear' or forget it works, so I start it again, wait forever and finally get the Red writes the error message. I tried the windows online and offline "Fixit and the right sequence is repeated continuously." Yesterday morning at 04:00 [if there are 36 hours] I completed a new installation, over the next 24 hours, I have to have rebooted and retried the windows update at least 4 times. I also tried a couple of different ' FixIt. This morning, becoming almost ready to... Yet once, I tried to use the updates. He did what he normally does... the scan, check... check... NOPE! nothing for you. So I tried the specific 'fixit' MicrosoftFixit.wu.LB.7235772074748435.1.1.Run it tooks ages and ages to complete... but once it was over, no changes because no errors not found. Immediately, I opened windows update via the Start button, click on check for updates... and immediately got written red error with updates. [Screenshots have been taken, timestamped in the seconds between them showing the previous references].

  Can someone help me? Why is - this all of a sudden becomes a common problem? Each PC I put back nine have different configurations, my wireless network has no problem with updates from the manufacturer's websites... SO, WHY THIS ISSUE FROM MICROSOFT?

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Help with error of unidentified network and Teredo Tunneling

  Well guys, this one's a doosey! My computer has recently lost my internet connection and it gives me the network not identified when I try to connect to my WiFi.  I looked into it and found a couple of things different.  One of them being that the Teredo Tunneling driver in my network drivers does not (code 10).  I tried to do a few things to correct what I found on other resources, but they did not work.  At this point I don't know what to do, so I could use some help!

  Here's my ipconfig/all, if this can help!

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\Owner>ipconfig/all

  Windows IP configuration

  Name of the host...: Allens-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt #2
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 9C-4E-36-3C-86-29
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel Centrino Wireless-N 2200
  Physical address.... : 9C-4E-36-3C-86-28
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e999:dc2e:1673:3164% 13 (Preferred)
  IPv4 address: 192.168.0.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Monday, October 13, 2014 21:27:44
  End of the lease...: Tuesday, October 14, 2014 01:01:19
  ... Default gateway. : 192.168.0.1.
  DHCPv6 IOOKING...: 362565174
  DHCPv6 DUID customer...: 00-01-00-01-19-25-C7-9A-DC-0E-A1-FC-AC-FD

  DNS servers...: 192.168.0.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)
  Physical address.... : DC-0E-A1-FC-AC-FD
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Owner >

  Hello Allen,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the internet. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  Remember to make changes before this problem?

  In the meantime, please follow the following suggestions to solve the problem.

  For questions related to the unidentified, network please follow the suggestions of Nithyananda J and see if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Also, try to Reset Winsock and see if that helps.

  1. Click Start, all the Programs\Accessories and click right on command prompt.
  2. Select ""Run as Administrator " to open a command prompt."
  3. In the windows command prompt , type the following commands:
  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer. This should help.

  For problems related to network card drivers, where you get an error code 10 in device properties. You can try to follow the steps mentioned in the link below:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  https://support.Microsoft.com/kb/943104?WA=wsignin1.0

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Help with error blue screen. BCCode: 116

  Hi, I get the following error message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1053

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8010AFC4E0
  BCP2: FFFFF8800FC9E7A0
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  You can see here .dmp file:

  https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

  Hello

  Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

  nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

  fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

  1. check with Nvidia Support, their drivers and documentation online and ask in their forums

  on known problems. Update the video driver. If there is no newer, you will need to come back
  for a more stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated BIOS, drivers of low level chipset and on-board major and
  separate device drivers.

  BiosVersion = 0205
  BiosReleaseDate = 01/08/2011
  SystemManufacturer = ASUSTeK Computer Inc..
  SystemProductName = CG8565
  Family = Desktop
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = CG8565
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL other methods in the troubleshooters below and in the next message.

  =============================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug Check 0 x 116: VIDEO_TDR_ERROR
  

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  VIDEO_TDR_ERROR settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The pointer to the context internal TDR recovery, if they are available.
  2	A pointer to the loaded device driver module (for example, the owner tag).
  3	The error code of the last operation that failed, if they are available.
  4	Reserved.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Help with error 80070103

  I tried d/l this update and it is constantly as having failed.  Is it a vital update?

  Advanced Micro Devices, Inc. - WDDM1.2 graphics card - AMD Radeon HD 7520 G

  Download size: 42.6 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Any help on this is greatly appreciated.

  Thank you.

  Paul

  Hello Paul,

  Welcome to the Microsoft community.

  If you receive error Windows Update 80070103 while installing updates, you are trying to install a driver is already installed on your computer or a driver that might be less compatible that you have already installed. To find more information please refer to the procedure described in the following article:

  Error 0 x 80070103 is displayed when you use Microsoft Update or Windows Update Web sites to install updates

  Hope that the information provided is useful. If the problem persists, get back to us with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.