Help with HDMI port not working not not Vixia HF M30

Similar Questions

• HDMI port not working not not on my C665 satellite

  Hello

  I have a Satellite C665, model No. psc55a-013008. He hasn t skipped a beat so far in nearly a year, but the port HDMI has stopped working properly. In the settings screen it recognizes a TV, will even you say the brand and model, the TV also picks up an inadequate signal and no picture or sound will be played through the TV.

  "I did a little research (also bought the new HDMI cable without success) but apparently a new driver for the HDMI Control Manager" will solve this problem, but my model was not in compatibility with the driver, and I can t find a compatible, could you please help me? Maybe a link to where I can find the driver for my model, I also can't find the 'HDMI Control Manager' in the device to update here either Manager.

  Thank you very much
  Bill

  Hello

  HDMI Control Manager is a tool of Toshiba released for laptops special models.
  For example you can find the HDMI Control Manager in the field of driver Qosmio F750.
  But there is no HDMI for Satellite C665/660 series Control Manager and to be honest I don t think it might be the solution in your case.

  First I would recommend you to use the Fn + F5 option to check whether you can switch to an external monitor/TV.
  Usually, this is the option which should be used to get external displays the output.

  In addition, I recommend setting the BIOS to the default settings.

• HDMI port not working not

  Hello

  I have laptop HP 2000 and all of a sudden HDMI port has stopped working. Factory restore and a chipset driver helped and it started working. my bad, I installed a graphics driver that took back me to sqaure one. HDMI port on the laptop does not work. HDMI cable and HDMI to the TV port is all working.

  I ran HP support assistant, and it shows all the necessary updates are in place. even if it worked in the meantime, it must be a problem with the chipset driver. Any help would be greatly appreciated.

  ~ Swami

  Hello swami123, welcome ot the HP Forums.

  It seems that you have a problem with the HDMI port. I will try to help you with this.

  Please provide the following information.

  Model and product numbers for the laptop.
  Currently installed.

  Your post has confused me a little. "Restore factory and a driver helped chipset and it started working." my bad, I installed a graphics driver", which has actually been updated?

  These can help you:

  HDMI display resolution and problems of his (Windows 7 and Vista)
  Download or update of software and drivers for HP computers

  I look forward to your reply with the requested information.
  Thanks for posting on the HP Forums.

• Could not get the HDMI port to work on the HP touchsmart.

  I have a HP Touchsmart 600-1265 with an HDMI port. I have connected the computer to the TV but can not get any audio/video to display. I don't know if you need to activate the port or what you need to do to make it work.

  When I push the A / V button above the HDMI port it shows the computer displays and below, it is then them a VGA and HDMI boxes but when I scroll down and select HDMI the screen just empties for a few seconds and then back on the computer screen.

  What should I do to make this work?

  Yes, the entry also. This is what the switch you mentioned.

  See you soon,.

• HDMI ports not working not not on kdl-40xbr4

  Hello, I recently returned from vacation to find that a lot of my components and my tv did not work properly. Neighbors, said that there was a bolt of lightning very close at the time I was absent. My main problem now is that my kdl-40xbr4 has lost the use of its HDMI ports. The TV works as usual if the components are connected in any other way, but the HDMI ports will not work. If I select one of the ports HDMI the banner at the top will indicate which input is activated just as usual, but it will not go away because there is no picture or sound to come whether it is through the HDMI ports. Has anyone ever encountered this problem, and no one knows a solution?

  Hello and welcome to the Discussion Forum for the users.

  1. turn off the TV and unplug all connections HDMI to the TV.
  2. turn on the TV and all by pressing on the arrow to the top of the remote control, press the power button on the TV.
  3. the TV will turn off, then turn it back on again and then release the up arrow button.
  4 complete the initial configuration of the TV Wizard.
  5 turn off the TV and plug it back to TV HDMI connections.
  6. turn on the TV and check the connected HDMI inputs work or not.

  If these HDMI ports are still not working please contact Sony support services options.
  http://eSupport.Sony.com/us/p/support-c... = KDL40XBR4

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• Problems with HDMI Port 3/4 on Toshiba 46xv733

  HY everybody,

  When I try to connect a device (PC, Xbox, or PS4) HDMI1 or HDMI2 (where everything is fine) for HDMI3 or HDMI4 I can't make them work properly. Resolution passes something a cable not only 30 Hz. When I try to change the resolution (on PC) the photo does not match the screen (for large or too small).

  I searched throu the documentation and the Web but can't find info HDMI3/HDMI4 are different from HDMI1/HDMI2.

  The TV is Toshiba 46xv733.

  Any suggestion on how to solve this problem would be highly appreciated.

  Thanks in advance

  Hello

  In [User Guide | http://www.toshiba-om.net/LCD/PDF/English/XV733-32374046-English.pdf] you can find some information that certain HDMI devices at the beginning may not work properly with your latest HDMI TV due to the adaptation of a new standard.

  In this case you must unplug your HDMI cable first, and then try the two options settings. INSTAPORT content type and turn off.
  You start HDMI source should work with your TV.

  The HDMI 3 seems to be a little different from the HDMI 1 and 2.
  3 HDMI supports digital and analog sound.
  HDMI 1 / 2 / 4 supports digital audio ONLY.

  The HDMI 3 must be used in order to receive sound from a PC connected (via HDMI to DVI cable).

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• connection to a VGA monitor or projector with HDMI port

  What kind of hardward should I get connect my computer that only has a HDMI port to a monitor or projector that has a VGA connection?

  Hello

  You need a converter HDMI to VGA such as:

  http://www.Jaycar.com.au/productView.asp?ID=AC1638

  Kind regards.

• HP Beats all-in-one: HDMI port not working do not (Windows 10)

  Hello world

  I am trying to add a second monitor to my computer, all-in-one, but the monitor or the computer seem to recognize that an HDMI cable is connected.

  The I connect to the display is a Dell screen.  When HDMI is cable in my computer just flashes black again and return to the main screen.  Also the second monitor gets no signal.

  Help please, searching and searching for an answer for days!

  Thank you very much

  You may be able to use a USB 3.0 to HDMI adapter.

  This site has several examples: https://www.startech.com/AV/USB-Video-Adapters/

  The button is to tell your monitor to switch to the source of the HDMI cable into the back.  It will not output any signal.

  WyreNut

• Help with CD drive not reading CD!

  My wife recently purchased an iPod, and when we tried to rip CD, CD said he could not 'read the media' on the CD... and after having tried with 2-3 different CD I got the same result.  I updated the drivers from the CD-ROM and used "FixIt" Microsoft application and still no dice!  If there is any futher information, please let me know... but please HELP!

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help with spry does not display using ssi

  Hello

  I have reviewed the previous tutorials and can't find where is my mistake.  I cut and pasted the code for spry on an include with the extension .shtml file.  I mentioned it in the file and header seeems correct,

  My files are relative root

  I have a file called includes, you can view the source here

  http://crystalbeach.com/funthings/includes.shtml

  Here is my link that is supposed to be the spry navigation bar display.

  http://crystalbeach.com/funthings/index_erinn.shtml

  Help, please!

  Thank you

  http://crystalbeach.com/funthings/index_erinn.shtml

  Line 29

  is simply an ordinary HTML comment. It doesn't do anything.

  Implement

  [an error occurred while processing the directive]

  This means that your include file is named includes.shtml and it is always stored in a folder called «funthings» Many people store includes inside a folder named "includes" in the folder root on the server.

  NOTE: the .shtml file extension applies to the page parent asking the include file.

  The include file can have any file extension would be for example menu.monkeybutt where the code include[an error occurred while processing the directive]

• Help with images does not

  My Flash page is supposed to load the images from Photobucket. However, the images are not loading. I checked the two things to see if they have an effect:
  
  (1) the question if Photobucket has a policy file (crossdomain.xml) to enable external access. He does.
  (2) change the setting allowScriptAccess to "always."
  
  Here is the HTML page where the Flash file is used:
  
  http://www.geocities.com/mikehorvath.geo/legopanotour.htm
  
  The page works fine on my hard drive. I'd appreciate any help.
  
  -Mike
  
  [edit]
  Duh! I did not understand the purpose of policy files. The domain of the server of my own site should appear in the policy file for Photobucket. Please ignore this message.

  My Flash page is supposed to load the images from Photobucket. However, the images are not loading. I checked the two things to see if they have an effect:

  (1) the question if Photobucket has a policy file (crossdomain.xml) to enable external access. He does.
  (2) change the setting allowScriptAccess to "always."

  Here is the HTML page where the Flash file is used:

  http://www.geocities.com/mikehorvath.geo/legopanotour.htm

  The page works fine on my hard drive. I'd appreciate any help.

  -Mike

  [edit]
  Duh! I did not understand the purpose of policy files. The domain of the server of my own site should appear in the policy file for Photobucket. Please ignore this message.

• Please can someone help with: __Windows can not find C windows system rundll32 exe?

  I don't have a windows xp disc

  Hello Alcocer,

  Thank you for your message.  Click HERE and try a system restore to an earlier date when everything worked correctly.  If this does not work, you need an XP disk to run a repair of the system.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.