Help with timeline Navigation problem

Similar Questions

• Need help with work flow problem: a single e-mail notification non-stop.

  Hello
  
  We have created an approval Workflow custom PO based on the standard PO approval workflow and we had it for awhile now. Last week, we had a problem where the notification keeps on sending e-mail to suppliers and buyers. We discovered that the notification_id given in table WF_NOTIFICATIONS keeps having updated by the minute affecting the MAIL_STATUS Invalid then SENT back, then back to INVALID again and so on. We think that what is updated in this table is the cause, but so far we have not found what is updated. Here are a few of our instance.
  
  Oracle Applications: 11.5.10.2
  Database: 10.2.0.4 64bits
  OPERATING SYSTEM: AIX
  Custom workflow based on the 115.127.11510.16 review
  
  Customizations:
  -Created in custom notification that xx_email_po_pdf_supp based on EMAIL_PO_PDF_SUPP.
  -Creation of custom message XX_EMAIL_PO_PDF based on EMAIL_PO_PDF.
  -Added #WFM_CC to XX_EMAIL_PO_PDF.
  -Creating custom attribute XX_PO_WF_EMAIL_PERFORMER and set as an interpreter to the XX_EMAIL_PO_PDF_SUPP notification.
  -Created the custom XX_ADDTL_STARTUP_VAL function right after "Set Workflow start values of service." This function sets the #WFM_CC attribute and the XX_PO_WF_EMAIL_PERFORMER attribute.
  
  Not sure if the customizations have nothing to do with the question since not all POs have this problem. Anyone have this experience? Appreciate help with this.
  
  Thank you
  Allen

  Just to review this thread, can help you
  Workflow Notification Mailer is Spamming accounts of e-mail users [1293792.1 ID]
  Thank you

• Need help with the huge problem of first Pro Photo. Confused beyond belief.

  Ladies and gentlemen, I've been at this for two days and am desperately needing help. At the moment my editing in Premiere Pro is completely blocked because of a bizzare picture problem. I am 100% glued and impossible to change.

  When I add a picture of my bin, it's ok. Then I add a second and it seems fine. But all the photos I add after this show as the first image. Never forget that the name of the file appears correct.

  The image itself, as well the thumbnail and the image in the timeline, etc. are just the first image.

  I restarted, rebooted, started new projects with new settings, cleared the cache first Pro... Nothing works.

  Video is not a problem. Only images. And now I'm dead in the water as a result.

  Look at this screenshot. See how the other as the second picture they are all the same? Well, they shouldn't be. But they are. And I'm stuck and cannot change at all as well.

  WTH is going on here?

  I have Premiere Pro 5 on a PC from Adobe Production Premium.

  Is a question I've had recently in the middle of editing that Premiere Pro will start in line video that has already been fulfilled previously.

  Begging for help here.

  

  Since you have never had this problem with image files

  in before cs5, I'd be inclined to turn to the source

  images that caused this problem to emerge

  If I remember correctly this problem, it has to do with the

  "image" header written to image files,

  and it also seems that the problem was unique to the .jpg images

  first merges by header information and duplicate images

  Open in ps and resave images re-written the header information

  for a State that is correctly read by first

  HAHAHAHAHAHAHAHAHAHAHA!

• Motorola please help with my wifi problem!

  ARGH it to happen again! My wifi worked horribly on my droid x when running 2.1, slowing down every 2 minutes, and after doing a factory reset did not work, while waiting for my other wifi devices in my house as my 2nd generation ipod touch worked perfectly with wifi. The VZW rep tells me "the ipod touch might have a different wifi system so we cannot help you" because they have probably been heard everywhere and don't care no more, but due to fire other ridiculous problems, I decided to upgrade to the 2.2 Froyo leak, and it incredibly solves all problems! Everything worked perfectly, and I thought that if everything has not been fixed I just return it. Now 2 weeks later, each signal I get is cancels every 1 or 2 seconds and it is impossible to connect, and it's the same thing with my dads x droid who also runs the froyo leak. Meanwhile wifi still works perfectly on my ipod touch. How can I solve this problem? It should not be even more of an issue. My wifi worked perfectly in devices mobile beginning like my PSP and that was several years ago. I still have 11 days to send it under the 30 day warranty, so do I just get it replaced?

  Also, I tried to reset my router too much already, and I have all the security settings to this topic. Defining policy standby wifi "Never" also do not resolve this problem.

  This problem is known and is being developed. the 2.2 leak that you upgraded to was not final and therefore not finished. you are now looking for the way to get back to stock 2.1. When Verizon and Moto send the OTA 2.2 very little time the network will not recognize your version of the operating system and therefore you will not be offered the official OTA.

  It will be fixed, and at least it's just a software problem that can be fixed and not a hardware problem that causes the problem.

• Help with major security problem if you please. Internet gateway?

  Hello

  After a few weeks of scratches all about untangle sceurity perceived a few questions with email etc. - yesterday I belive I discovered a big problem and need some help please.

  I hope that I write from own machine because I believe that desktop home computers are compromised.

  Main PC is running XP and has a connection via a cable ethernet via a bt Home Hub2.

  Yetsrday while watching my network connections I noticed something called "Internet GATEWAY" above my LAN icon.

  It showed that I had been connected for over 2 days (a little more than 2 hours for the LAN) even when the PC off and was send/receive many packages and seemed much faster than my LAN. problem: I click on this & it won't let me log out or see properties / settings - I get a warning about 'connection is currently unavailable '... I really worry that it is someone else on my PC - is this right? How can I fix it? and it is a matter for the Police.? I'm really worried. Other symptoms, I noticed - my windows log on 'his' dissapraed a & in the event Manager-, there is no security - only since 2006 newspaper.  Very slow PC. Running SuperAntispyware - no problem after removing a Security Center option turn off a few days ago.  Really gratfeul l to help guys. Am at my wits end. Very garteful using anyones.  I guess that my internet connection and PC was hacked/compromised.

  To be clear, you remove all networking services, but just the part that detects and controls "gateways" as your router.  This removes the "Internet gateway" of network connections icon, but should not do something else.

  If a right click or double click on the "Internet gateway" just produced a message "connection is busy", which makes me think that something is not configured correctly - either the router (bt Home Hub) has turned off UPnP (or does not really support) or the UPnP in network services service is not installed, or something else.

  I don't think that someone else is controlling your connection, but as I said, the other symptoms you describe indicate a malware problem continues and you need to take steps to ensure that your machine is free from malware.

• Need help with solving a problem of component inking!

  I have not had any problems with the following programs (new laptop), at first with Windows Journal, sticky notes, handwriting recognition and the cutting tool. After six months, these programs do not work. Windows Journal: failed to start, error during initialization of the inking, sticky components: doesn't work do not restart 80004005, handwriting recognition: ink does not work on your computer now, snipping tool: ERROR now right does not not on your computer. I don't know if these problems are associated with Notea, trial version has expired. or somethig to do with Microsoft Office, I got office 2007 school (brought, because of specific classes taken) or else I did! I tried several thing in the help section and nothing works!

  It would really help if you could point me in the right direction!

  Thanks for your help!

  Ricky Miller

  Close this forum, see link below:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/f14d48b1-8753-4966-AE66-dcc248c24eb5

• Need help with the printer problem.

  * - Original title - help

  Why can I send pictures via bluetooth for continuous printer asking me a code years samsung knows anything about can any 1 hepl

  Hi Patrick,

  1. What is the brand and model of the printer?

  2. What is the exact message that you get when trying to print?

  3. don't you make changes to the computer and the printer prior to this problem?

  We can refer to this article and check if that helps.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Response with the State of the question and we will be happy to offer you our help.

• Please help with a technical problem 2209WA

  Hello

  I own a model 2209WA monitor. She was purchased in March 2010.

  Recently, I found that there was a visible gray streak in the center of the screen and ran a diagnostic test as described on the forum.

  I was not able to reproduce the problem on STFC, but on FPDBIST I found that the streak was no longer a gray spot on the left center of the screen on a gray background.

  I would definitely solve the problem because the problem is obvious enough to distract you. If not repairable by myself, I would ask for a warranty replacement, but I can't try to find the State of the order associated with my account, because it doesn't show any order beyond two years in the past, and I understand that the monitor had initially warranty period of three years. If there is any way I can get a copy of the draft of the order or shipping confirmation that I would be very grateful.

  As a result, more information on the monitor:

  Number of series PPID, monitor numbers 20 = CN-0H736H-72872-01 a-1R4L
  Monitor tested ports = DVI, VGA
  Video card and ports tested = AMD 4870, AMD 7950, DVI and VGA
  PC = generation model customized Intel X 79
  Operating system = Windows 7 Pro 64-bit
  Have you updated the video card driver? Yes, tested with catalyst Beta 12.11, 12.6 Legacy
  The monitor has been listed on the Device Manager

  Once more, any help in this matter is greatly appreciated.

  Viaduct,

  Contact Service customer Dell in your country. Provide the following applicable data-
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  Reference Dell 20 monitor numbers PPID number: CN-0H736H-72872-01 a-1R4L
  Reason:
  If applicable, a link to a picture of failure: http://s14.postimage.org/3y0a2yvsx/2209wa_test01.jpg

  Since you don't have the order number on the spot, they can search in our database of DellServ using your data above for all of your customer and order numbers to find the order of monitor.

• Help with Windows XP problem (Lenovo Ideapad S12)

  Hello

  I bought a new S12 a bit backward, but recently, I had a problem with it. Earlier today, I was online and I must of clicked on a link that has started with Java for a reason any. Almost instantly my antivirus picked up a threat, she has actually won 51 threats, I did a scan and it found no aNY\ threat. I restarted the computer and that has been the problems began.

  Windows starts fine, but sometimes does not the taskbar. Startup applications but continue to operate. For example I start 'My Computer' but then I can't go to my "My Documents".  And after that it seems to freeze but the mouse cursor can move but nothing really works and I have to force the computer off. Also sometimes when I run Google Chrome a message appears.

  WINDOWS-applicaTION ERROR
  The ApplicATION has no iniaLIZE PROPERLY (0XC0000022). Click ok TO close the APPLICaTION

  So im thinking the virus messed up the config so I read that perhaps I need to restore the partition. If you could help me with this.

  This is my first post something so if you could help me out... in other words im a beginner.

  -Thank you

  Hello and welcome...  ITF you are using a program of security as one of them...  Security for freedom and keep updating them... are you on the save side, but its good to save your work (data, music, photos...) at any time on an additional media as FlashThumbDrive USB or an opticaldrive...

  Do not trust a program of security... from time to time, use an external security program to search for viruses or so now...

  Keep your system clear, delete temporary data with a feather duster like cleanprog or ccleaner...

  Disable unnessessary progs ... could accelerate in some cases and prevents freeze/hang up/hick upward

  & If viruses or other malfunctions, its more comfortable to go to a zero & recover your system...

  and like many other programs google chrome is not bugs, what might happen...

  cordially KalvinKlein

• I need help with a technical problem

  I'm using Elements 8. The problem is that I can click on the clone brush, but the computer? don't clone anything. I get a message that there is an error. Problem is, the box with the message doesn't tell me what error or how to remedy the situation. Any help please.

  I just found out what I was doing wrong. When I should have used the Alt button, I used the keyboard control button. The Clone tool works now.

• Help with hyperlink - weird problem

  Hi, I use Dreamweaver to create a web page.
  
  I created my Web page layout page/logo/buttons/bg with Photoshop and ImageReady and then cut, then I've saved as HTML and opened it with Dreamweaver CS3.
  
  Adding text is no problem, removal of slices and making them in a background so I can add text above are not a problem. But when it comes to adding a link to a button (local file or a url), after choosing, it moves a few incongruous slices and mess my page.
  
  I also tried the link via the code window, but it's always the same. What is a bug? I created a few sites with 8 DM, use the same methods and I've never had this problem before?
  
  Help please?

  The reason is to create a hyperlink border is created. Either add border = "0" on your image or img {border = '0'} in your stylesheet if you have one.

  Shane

• Help with the startup problem. Start load page never stops

  This morning, I found a window on my PC (vista home prem SP 3) who said he had a problem with my departure upward. And that characteristic fixed departure could not fix it. I tried to restart my PC and he had charge green/starrt infinite loading bar. I tried to start in safe mode, but can apparently do not have start that is. I grabbed my system recovery DVD, tried to have either boot with the DVD or are looking for a repair-start feature. But when I try to start from the DVD he wants to restore then only of factorry. Did I miss something there at - it something I can do? I don't want to do a restore with since I have given, I don't want to lose and he's going to take me with all my software and udates about 1 week at least for good install and configure my PC.

  Hi Henry,.

  ·         What is the exact error you see on the screen?

  ·         You did changes to the computer before the show?

  Check to see if the following is useful.

   

  Method 1: Remove non-essential external devices and reboot the computer.

  Method 2: Repair of the boot from WinRE (Windows Recovery Environment) mode. Follow the article mentioned below, to do.

  Startup Repair: frequently asked questions

  See also:

  What to do if Windows does not start correctly

• Timeline navigation problem

  Building an application for the children I teach, exporting to Air for the office. I have a problem with it, it is very difficult to explain so I made a little video showing exactly what's happening.

  The video and the flash file are listed below. It is in Irish, just in case someone s difficult to understand.

  Problem - YouTube

  Elipse messing with.fla - Google Drive

  When you edit images, your buttons no longer exist.  the code of the listener that defines how they should behave is removed.

  then you come back to this structure where your buttons exist (yet), but their code of the listener should not be on this framework (and listeners are not redefined) so that they do not meet the mouse actions.

  There are a number of remedies.  the easiest way is not to remove these buttons when you edit images.  of course, you no longer want them visible and clickable so that you can be:

  make their visible property false (when changing frames) and make it real on the frame where you want visible or use removeChild to remove it from the display list.  (remove from the display does not remove them and so their listener code is not deleted).

• Please help with the DNS problem in VMware Workstation 6.0.2

  I have 3 servers Configuration of VMware Workstation. There are a the Ethernet parameters ' host only: a private netwrok shared with the host country. The problem is I have a server configured as a main domain controller, I can join my other two servers to the domain very well, I can ping by name, but none NSLOOKUP. Basically I have a DNS issue that I MUST correct.

  Anyone know what could be the problem? Or where to look? I attach a doc with my settings.

  Thanks in advance.

  Have you checked that the clients are configured to register in DNS?

  Have you checked the the event log for entries regarding a DNS record failed?

  Did you check that there is a records for each host in the appropriate DNS zone?

  The clients have the right DNS server configured?

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

  Published by AWo

• Need help with a navigation bar

  I am new to Dreamweaver, working on my first page. This is my first post also, so I hope I am doing this correctly.  I created a set of night navigation bars. It's a vertical bar with 9 points.  It was beautiful, except the elements were not centered in the sidebar.  I was experimenting tonight and now the 'elements' 8 / securities disappeared.  The list is essentially disappeared with the exception of a title.  When I look in the code view, all elements are listed. I hate to delete the page and start over.  Someone at - it ideas?

  Just reply to this and attach files.

  Nick