heterogeneous services 10gr 2 Questions

Similar Questions

• on heterogeneous Services of Oracle and Oracle Gateway

  Hi all
  
  
  I am very new at this, I want to know:
  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  (3) is there a step by step link to configure odbc to create dblink?
  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  
  Thank you very much for your help
  
  Concerning
  
  JOE

  Joe,
  Let the copy/paste your questions and comments online:

  (1) heterogeneous services of oracle and Oracle Gateway even or not? Need to license or not?
  Let me first clarify one thing, heterogeneous services is the generic mechanism in the database Oracle used by all gateways. The product you are talking about is database for ODBC bridge or the bridge of Sybase database.
  Database for ODBC bridge is available for Linux and Windows. It is the free product that does not require a license of Oracle. The license is included in your license data. It's a generic gateway which allows you to connect with any suitable part 3 ODBC driver to a corresponding foreign database. As this is a generic connectivity what words connect to real data, but also to MS Excel or text files as long as you have an appropriate ODBC, capacity driver is very limited.
  More powerful bridge is the bridge of Sybase database. It covers the same functionality as DG4ODBC but it also allows you to work with distributed transactions, you can call procedures stored remote Sybase etc.. This gateway is design for Sybase ASE connections, so it is also able to map some Oracle Sybase equivalent functions. This gateway for Sybase database is NOT free, it requires an additional license.

  (2) want to creating link database to Oracle 11 g to Sybase 15.5 heterogeneous Oracle using the SERVICES what drivers should I install to my pc (windows 7) and my server (Linux red hat 5)? Please give me the link for this
  It depends on your preferences. Two entry doors are available for Linux and Windows. When you use DG4ODBC, you must only be careful that you get a suitable 3rd party ODBC driver for this platform with the size of the corresponding word (64 bits for 64-bit DG4ODBC and 32-bit ODBC driver for DG4ODBC installations on 32-bit platforms).
  The latest version of the software is currently 11.2.0.3 and it can be downloaded (and installed from scratch) of "My Oracle Support". Simply open the patches & updates section, look for Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER and make sure you choose the platform you want to use. Then check out the readme file it lists, which of these download CD contains the gateway software.
  BTW, the CD contains DG4ODBC and DG4SYBS and it is up to you to decide during installation of which product you want to use.

  (3) is there a step by step link to configure odbc to create dblink?
  Installation of the ODBC driver is different from one provider to another, and from platform to platform - so we didn't not a note specifies how to configure the ODBC driver. This kind of question is best managed by the provider of the ODBC driver.
  Regarding the implementation of DG4ODBC on Windows, you will find the appropriate information in the knowledge base on My Oracle Support. Just look:
  How to set up DG4ODBC (gateway for ODBC Oracle database) on 32-bit Windows to connect to Oracle databases Post Install [466225.1 Document]

  and to DG4SYBS:
  How to set up DG4SYBS (Oracle to Sybase database entry door) on 64-bit Unix (AIX, HP - UX Itanium, Linux and Solaris) Post Install [437696.1 Document]
  How the installer DG4SYBS (bridge of Sybase database) on a 64-bit Windows [Document 1319852.1]

  (4) what's more convenient connection of heterogeneous Oracle or Oracle Gateway Services sybase?
  It really depends on your needs. DG4SYBS is sullen more easy to install because this gateway comes with everything you need and you don't have to find an appropriate ODBC driver or get the working ODBC driver. It is also more powerful as you can for example use triggers that replicate changes to data in an Oracle database on the Sybase database in the same transaction. When you want to call Sybase stored procedures, you can also do this with DG4SYBS. So it really depends on your needs.

  -Klaus

• Create the heterogeneous Services initialization file

  Hello, I am new to oracle as I am a student. I installed Oracle Database 11 g Release 2 Enterprise Edition.
  
  I want to use a Microsoft Excel file in a source file. In the Help Center it says I have to create the heterogeneous Services initialization file in a specific directory by using these commands: HS_FDS_CONNECT_INFO = odbc_excel
  HS_AUTOREGISTER = TRUE
  HS_DB_NAME = dg4odbc
  
  My question is where should I run these commands?
  
  If I have to do in SQL Plus, how for the specific path? When sqlplus open just writing SQL > and I don't know how I can go down the path that I want to so I can run the commands.
  
  I can go through the command prompt, but of course, it does not recognize these commands.
  
  Any answer would be instructive. Thank you.

  http://docs.Oracle.com/CD/E11882_01/OWB.112/e10582/loading_ms_data.htm

  You don't need to run the Sql command * more

  HS_FDS_CONNECT_INFO = odbc_excel
  HS_AUTOREGISTER = TRUE
  HS_DB_NAME = dg4odbc

  You must create the initexcelsid.ora file in the OWB_HOME\hs\admin directory with the list above

• Problem with Oracle heterogeneous Services

  Hi all
  
  I try to access SQL Server database using Oracle heterogeneous Services and I get the following error in my tarce file:
  
  
  ***********************
  Heterogeneous Agent release
  10.2.0.3.0
  
  
  HS agent received unexpected disconnection of CPP
  Network error 1003: NCR-01003: DND: read error.
  ***********************
  
  I checed the tnsnames.ora / listener.ora and they seems OK
  
  also tnsping works well on HS
  
  Thses are the steps I followed:
  
  1 Setup DNS system
  2 configure the HS Oracle initialization file under $ORACLE_HOME/hs/admin
  3 configuration tnsnames.ora in $TNS_ADMIN
  4 configure the listener.ora under $TNS_ADMIN
  5 craete db link
  6 mark db link gives the following error
  "No data more to read from socket".
  7 trace file under $ORACLE_HOME/hs/log shows the following error
  
  Heterogeneous Agent release
  10.2.0.3.0
  
  HS agent received unexpected disconnection of CPP
  Network error 1003: NCR-01003: DND: read error.
  
  
  Please advice
  Concerning
  Omer

  After the support ticket logging Web conference showed that has been ORA_NLS10. It disable, stop/start the listener has solved the problem.

• identifier too long on heterogeneous services-> MSSQL

  Got a strange problem, a little
  We got the heterogeneous services, pointing to a MSSQL Server.
  
  When I run
  
  Select * from table_name32charslong@mssql_server
  
  I get: SQL error: ORA-00972: identifier is too long
  
  Logic because the name of the table msserver is over 30 characters.
  
  Can it be solved without renaming the table / side view msserver?
  
  Thank you
  
  
  4Eyes

  BluShadow wrote:
  HS can only deal in restraint of Oracle specifications. i.e. table names must be is no longer than 30 characters that oracle would expect of his own paintings.

  I came across the same problem myself with a HS connection to an Excel spreadsheet that allows 32 chrs for worksheet names.

  Looks like you will need to rename the table, either create a view against it. ;)

  Well, OP has not to rename the table or create a view against it on the side MSSQL. He or she can use DBMS_HS_PASSTHROUGH:

  SQL> SELECT * FROM LONGER_THAN_THIRTY_CHARACTERS_TABLE_NAME@MDB
    2  /
  SELECT * FROM LONGER_THAN_THIRTY_CHARACTERS_TABLE_NAME@MDB
                *
  ERROR at line 1:
  ORA-00972: identifier is too long
  
  SQL> SET SERVEROUTPUT ON
  SQL> DECLARE
    2          c  INTEGER;
    3          nr INTEGER;
    4          id NUMBER;
    5          a  VARCHAR2(10);
    6      BEGIN
    7          c := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@MDB;
    8          DBMS_HS_PASSTHROUGH.PARSE@MDB(c,'SELECT * FROM LONGER_THAN_THIRTY_CHARACTERS_TABLE_NAME');
    9          LOOP
   10            nr := DBMS_HS_PASSTHROUGH.FETCH_ROW@MDB(c);
   11            EXIT WHEN nr = 0;
   12            DBMS_HS_PASSTHROUGH.GET_VALUE@MDB(c,1,id);
   13            DBMS_HS_PASSTHROUGH.GET_VALUE@MDB(c,2,a);
   14            DBMS_OUTPUT.PUT_LINE('ID = ' || id || ' A = ' || a);
   15          END LOOP;
   16          DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@MDB(c);
   17  END;
   18  /
  ID = 1 A = test
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  If OP wants to query the SQL table:

  SQL> CREATE OR REPLACE
    2    TYPE LONG_TBL_NAME_OBJ_TYPE
    3      AS OBJECT(
    4                ID NUMBER,
    5                A  VARCHAR2(50)
    6               )
    7  / 
  
  Type created.
  
  SQL> CREATE OR REPLACE
    2    TYPE LONG_TBL_NAME_TBL_TYPE
    3      AS TABLE OF LONG_TBL_NAME_OBJ_TYPE
    4  / 
  
  Type created.
  
  SQL> CREATE OR REPLACE
    2    FUNCTION get_data_from_link
    3      RETURN LONG_TBL_NAME_TBL_TYPE
    4      PIPELINED
    5      IS
    6          c                 INTEGER;
    7          nr                INTEGER;
    8          long_tbl_name_obj LONG_TBL_NAME_OBJ_TYPE := LONG_TBL_NAME_OBJ_TYPE(NULL,NULL);
    9      BEGIN
   10          c := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@MDB;
   11          DBMS_HS_PASSTHROUGH.PARSE@MDB(c,'SELECT * FROM LONGER_THAN_THIRTY_CHARACTERS_TABLE_NAME');
   12          LOOP
   13            nr := DBMS_HS_PASSTHROUGH.FETCH_ROW@MDB(c);
   14            EXIT WHEN nr = 0;
   15            DBMS_HS_PASSTHROUGH.GET_VALUE@MDB(c,1,long_tbl_name_obj.id);
   16            DBMS_HS_PASSTHROUGH.GET_VALUE@MDB(c,2,long_tbl_name_obj.a);
   17            PIPE ROW(long_tbl_name_obj);
   18          END LOOP;
   19          DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@MDB(c);
   20          RETURN;
   21  END;
   22  / 
  
  Function created.
  
  SQL> SELECT  *
    2    FROM  TABLE(get_data_from_link)
    3  / 
  
          ID A
  ---------- --------------------------------------------------
           1 test
  
  SQL>  
  

  SY.

• Family safety is unable to connect to the service, WMI/COM questions

  So, to start with the necessary technical information.  I'm having the problem on new systems within one of these configurations:

  Windows 8

  Windows 8 Pro

  Windows 8 improved to 8.1

  Windows Pro upgraded to 8.1 8.1

  After I installed the operating system and all the available patches, I can add an account and (to Win 8) Note that accounts for the child.  If I try to point 8.1, I get error dreaded "we can communicate with the service right now, please try again later".

  In Control Panel, when I click on 'Manage settings on the Security site family' I pause then the error "sorry, the service is not available.

  Search in the event logs, in the Microsoft-Windows-WMI-activity/Operational log I get an error, 5858 EventID:

  ID = {5144FE76-A71F-0007-0DFF-44511FA7CF01}; ClientMachine = nom_netbios; User = NETBIOS_Name\FirstName; ClientProcessId = 3640; Unknown = element; Operation = IWbemServices::ExecMethod - ROOT\CIMV2\Applications\WindowsParentalControls\Secured Start: WpcWebSync::EnableSynchronization; ResultCode = 0x803D0013; PossibleCause = unknown

  The GUID changes from attempt to attempt, and I can't find the GUID in the registry.

  Race to the resolution of security issues family continues to tell me that I have corrupted files (and it has fixed their), reboot, and the problem persists.  If I could find on what files have been corrupted as the fixed store who could help, but I'm not sure.

  SFC/scannow does detect no error

  There is no installed applications outside that comes with windows (new installation).

  I configured 2 child accounts.  Family safety works on a laptop computer Windows 8.1.

  I can connect (browser) on the family safety website.

  Any help would be appreciated.

  Hi MarKenin,

  I am a developer in the parental control team.  I'm sorry that you have had this problem with our product.  I don't want to thank you for providing an impressive amount of detail in your message.

  The WMI event, you found is indeed notable--it was our attempt to contact our service to add your machine to the parental control service.  The error code was an HRESULT value of 0x803D0013, which indicates that the web service returned an error.  There is no way to pick which was exactly the mistake, but we do actively monitor and review the errors that occur on our service to identify and solve problems that arise.

  We found a question that might have prevented Microsoft specific accounts to set up parental controls on all devices, the period you were trying to bring to the top of your devices.  The problem has been resolved, and we continue to monitor our service as well as these forums to identify new issues.

  Thank you

  Daniel

• using hotspot as a provider of Internet services to delay questions express airport

  I have an Airport Express 2nd generation. I've set up as a home network with no ISP due the fact that I can't get an ISP where I live. I use it for connectivity to all my other apple and mac products, over some generic devices. I go through the implementation of change the settings to ignore the Internet LAN Ethernet, allowing me to have my network. So this is where it gets me confused after a few hours or a device is disconnected. So to continue. Then I take my Netgear wntce2001 streaming single channel device/path/device that I bought. now only available as a wntce2003 dealer local. I go into my menu of the hotspot browser, (Netgear 779 s aircard) and access my WPS in place. The Netgear wntce2001 at this stage only powered with one reset fees, like its new. Push button WPS on my Netgear select wntce2001 WP / parring on my browser and let them connect. At this point the Airport express will amber. Using AirPort Utility I get the double NAT message with options to switch to bridge mode. It all works very well. Now I can use all my Apple products to get on the line and play my generation 4 Apple tv, etc etc. Here's the problem when I remove my Hotspot or it turns off. I'm locked out/unable to join my ISP network wireless access point, that I created.  my book pro Mac will recognize is no longer the Hotspot may not use a web browser to access my hotspot and any other personal devices or belonging to my friends can see or access the HotSpot. Until I drive a half-mile away with her. Or perform a Factory reset fresh out of the box on my Airport express. Even if I remove the hotspot (short drive) then back it's always invisible until I get back from the Airport express. Once I reset the AirPort Express and reset all my other devices. I can rebuild the network and use it as I'm writing this Question (letter). Is anyone know why and how I can solve this problem. In short having a provider. Hotspot demographically impossible only internet access...  Thanks to an old man persisted.

  If I were in your situation... the first thing I would do, is check the wireless internet provider, which is an ISP btw... If they can sell you or recommend a router Ethernet instead of a hotspot. An access point has loads of limits and is not very well at all apple hardware.

  I confess that reading your description of how make you it work, it does not look good.

  I suspect that one of the main issues is the limited number of intellectual property which generally offer wireless ISPS... 5 is the common number.

  You are really not on the express of all... the devices are connect to the hotspot... and when something happens, you have exhausted all of the IP addresses.

  In any case we can begin to do some tests to prove it.

  Please post screenshots of the current configuration of the express with all this work to your satisfaction,

  I need the page summary of airport utility. That is to say it.

  

  Click on the button to edit, and then give me the Internet tab, tab wireless and Network tab screenshots.

• Microsoft Office Service Pack 3 Question

  My computer says I have SP2.  I downloaded the SP3 and it appears in my programs, but apparently has not installed correctly.  I cannot delte the update of my programs and can not find a way to download via Windows update, custom or explicit.  How can I install Service Pack 3 at this stage?

  Provide more information on the exact error with Office applications.

  Office 2010 doesn't have a version of Service Pack 2 or Service Pack 3. To check the version of Office installed on the system.

• ORA-12154 with 11g and heterogeneous services

  Hello
  I have a procedure that bring data from a mysql on a service of HS server.
  In 10G has worked very well, but after I migrated to 11g, weird things happen.
  If I ran the procedure (or work that calls it) directly from sqlplus, it's fine, but if I schedule a task to run this procedure, he breaks up with: ORA-12154: TNS: could not resolve the connect identifier specified.
  It's like some environmental parameters or the rights are missing when this work is performed automatically.
  So what's changed in 11g?
  
  
  Any help is appreciated,
  Thank you

  ORA-12154: ALWAYS occurs only on SQL Client & not SQL * Net packets never leave client system
  ORA-12154 NEVER involves the listener, the database itself or whatever it is on the DB server.
  ORA-12154 occurs when the client wants to connect to a DB Server system by using a connection string.
  AMT-03505 is thrown by tnsping & is the same error ORA-12154 thrown by sqlplus or others.
  The find operation fails because the supplied name can NOT be resolved at any remote DB.
  The analogous operation would be when you wanted to call someone, but did not find their name in any directory.
  The most common cause for ORA-12154 error is when the connection alias cannot be found in tnsnames.ora.
  The research of the alias operation can have an impact on the content of the sqlnet.ora file. DOMAIN entry specifically.
  So after the content of the sqlnet.ora file.
  TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS: could not resolve service name [114085.1 ID]
  http://edstevensdba.WordPress.com/2011/02/26/ora-12154tns-03505/

• AIA 11g - Service FP constructor Question

  Hi all
  
  I am creating the impl provider ABC using the Service constructor. I have defined the component Service of Solution in the Workbench of life cycle of the AIA project as BAERP create purchase order list Ebiz provider ABC. The CreatePurchaseOrderList of the PurchaseOrderEBS method calls on this ABC with a list of purchase orders.
  
  To create the Service constructor, these are the steps that I follow,
  
  1 create the new project-> business level-> AIA-> part of AIA Service project
  2. Description of the Service: select the component of Service of Solution in the life cycle of the AIA project Workbench
  3. Details of the Service: Product Code: Ebiz, Application name: Ebiz, the Application Id: EBIZ_01, short name of the Application: Ebiz, Service operation: create, Type of Service: provider ABC (only the relevant attributes are shown)
  4. purpose of the Service: WSDL: select PurchaseOrderEBSV1.wsdl in EnterpriseBusinessServiceLibrary, operations: CreatePurchaseOrderList
  5. details of the Service target: I select the deployed wsdl of a composite file, which inserts a list of the commands in a data base operations: process
  6. I cliquerai on end - the ABC, but also the BPEL process that is created is CreatePurchaseOrderEbizProvABCSImpl, while I was expecting to be created as CreatePurchaseOrderListEbizProvABCSImpl.
  
  I am missing something here, or should I refer to the ABC as CreatePurchaseOrderEbizProvABCSImpl?
  
  Kind regards
  Anish.

  Are you sure that the ObjectName in step 4 keeps the PurchaseOrderList value? im not talking abt the operation... IM more specific to the message of EBM - name of the object...

  Let me know if this helps you.

  Kind regards
  Rahul

• Cannot start the listener of the heterogeneous services - TNS-01151

  Hello
  
  I am trying to create a listener to our Oracle database 10.2.0 to a SQL Server database located on another computer in our network.
  
  (1.) I have modified the files necessary .ora in $ORACLE_HOME/hs/admin /.
  2.), I try to start the receiver through CMD: lsnrctl start protime
  
  But I get the following error:
  
  -----
  Microsoft Windows [Version 5.2.3790]
  Copyright (C) 1985-2003 Microsoft Corp.
  
  C:\ > lsnrctl start protime
  
  LSNRCTL for 64-bit Windows: Version 10.2.0.1.0 - Production on March 17, 2009 12:22
  : 39
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  From tnslsnr: Please wait...
  
  Cannot open the service < OracleOraDb10g_home1TNSListenerprotime >, error 1060.
  TNSLSNR for 64-bit Windows: Version 10.2.0.1.0 - Production
  System settings file is D:\oracle\product\10.2.0\db_1\network\admin\listener.or
  one
  Log messages written to D:\oracle\product\10.2.0\db_1\network\log\protime.log
  AMT-01151: lack listener name, protime, listener. ORA
  
  Listening port could start. See the above error messages...
  
  
  C:\ >
  
  -----
  
  These are the files:
  
  
  initPROTIME.ora

  # This is a sample agent init file that contains the HS parameters that are needed for an ODBC Agent.
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = PROTIME
  HS_FDS_TRACE_LEVEL  = OFF

  Listener.ora

  # This is a sample listener.ora that contains the NET8 parameters that are
  # needed to connect to an HS Agent
  
  # LISTENER =
  #  (ADDRESS_LIST=
  #       (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
  #       (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
  
  # SID_LIST_LISTENER=
  #   (SID_LIST=
  #       (SID_DESC=
  #          (SID_NAME=hsagent)
  #          (ORACLE_HOME=/private/app/oracle/product/9.0.1)
  #          (PROGRAM=hsagent)
  #        )
  #       )
  
  #CONNECT_TIMEOUT_LISTENER = 0 
  
  PROTIME =
   (ADDRESS_LIST=
        (ADDRESS=(PROTOCOL=tcp)(HOST=SRSPL004)(PORT=1522))
        (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
  
  SID_LIST_PROTIME=
    (SID_LIST=
        (SID_DESC=
           (SID_NAME=PROTIME)
           (ORACLE_HOME = d:\oracle\product\10.2.0\db_1)
           (PROGRAM=hsodbc)
         )
        )

  tnsnames.ora

  PROTIME  =
    (DESCRIPTION=
      (ADDRESS=(PROTOCOL=tcp)(HOST=SRSPL004)(PORT=1522))
      (CONNECT_DATA=(SID=PROTIME))
      (HS=OK)
    )

  its your default listner file, save it some start from another hard disk by the command copy OS then replace your alls contained in this file by

  PROTIME =
   (ADDRESS_LIST=
        (ADDRESS=(PROTOCOL=tcp)(HOST=SRSPL004)(PORT=1522))
        (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
  
  SID_LIST_PROTIME=
    (SID_LIST=
        (SID_DESC=
           (SID_NAME=PROTIME)
           (ORACLE_HOME = d:\oracle\product\10.2.0\db_1)
           (PROGRAM=hsodbc)
         )
        )
  

  After that, save the file and check the status of

  LSNRCTL>reload protime
  LSNRCTL>status protime
  

  Khurram

• With the help of Oracle heterogeneous access table to sql server database services

  I created a dblink "POC_HS" of oracle to sql (heterogeneous services implemented) and I can't go out data from the default database to which the DSN (for sql server) is connected successfully.
  
  So, this ' select * from ' Test@POC_HS is works perfectly well on the Oracle database as 'Test' table resides in the default database (that the system DSN is connected to).
  
  But when I do ' select * Abc.Test@POC_HS' where the Test table resides in the 'ABC' database which is not the default survey database an error as follows:
  
  ORA-00942: table or view does not exist the name of incorrect [generic object using ODBC Connectivity] [Microsoft] [ODBC SQL Server driver] [SQL Server] 'Abc.Test '. [Microsoft] [ODBC SQL Server driver] [SQL Server] Instructions could not be prepared. (SQL State: S0002;) SQL code: 208)
  
  I also tried "select * from Abc.dbo.Test@POC_HS' but oracle throws this exception" ORA-00933: not correctly completed SQL command "."
  
  The dblink and system DSN user account has access to database 'Abc '.
  
  Thoughts?

  No, this is not possible.

• Oracle - the question of the integration of MS Access

  Guys,
  
  Yesterday I asked the question of the integration of Oracle and Access, and I got the answer through oracle heterogeneous services, you can connect to ms access to insert/update of the data.
  
  I had another thought on direct vs. indirect integration method.
  
  1. with the help of XML to send and receive data between oracle and MS. Access.
  Have a specified location where oracle will generate xml file and within the specified time interval ms access checks the file and the process
  This file. Even reverse access can generate an XML and oracle can process this file with working hours.
  
  2. using heterogeneous services - seems to be a free service as I could find MS Access driver online
  
  If immediate information is required in the two system then I have no choice but to use heterogeneous services? * *
  
  If information can wait for labor scheduling, I intend to propose the approach 1 (generate/process xml file). If both systems are not really dependent on each other
  
  Everything I need to examine or missing / or one is better than another?

  Another approach would be a JDBC connection: load in the BDD Oracle JDBC driver, then opening the link to MS Access using JDBC. The disadvantage of this solution is that you all on your own code.

  While a 'real-time' ready-to-use application, DG4ODBC (HSODBC product tracking) is the right choice.

  As MS Access can also get data via ODBC, why not link tables Oracle in MS Access and loading of XML content in MS Accesss using a scheduled task, you can trigger then just selects and inserts. For this approach, you just need to have an ODBC Oracle driver installed where your MDB file.

• Heterogeneous Connectivity environment layout

  Hai everybody,
  
  I am very new to "ORACLE heterogeneous connectivity"...
  and this is my senario... I need to connect to oracle with microsoft access (and update of 5 tables more regularly)...
  so...
  
  What are the pre-reqsites needed to make this connectivity...
  What are the drivers/softwarz, supposed to install to achieve my goal...
  
  Datebase:11 g 1
  OS: wisdows XP
  
  and if you can, please give me a better link, from a beginner / give me a brief description...
  
  Kind regards
  JP@valapad

  Hi JP,
  I'm glad it's working now.
  To answer your questions-

  1. access the column names are case sensitive must delimit them by double quotes in a select statement to access in this case, otherwise they are converted to upper case.
  So try to select it as -

  Select 'name' of dep_mst@db_link;

  2. can I update oracle ms access tables?
  Yes, DG4ODBC supports updated statements, so it should work for access also. The only restriction is that DG4ODBC cannot be used in distributed transactions, is that you can not update Oracle and Access in the same statement. There must be a validation between the 2 updates.
  You can not use the gateway to update access Oracle.

  3 can you in brief/link on hs agents ("PROGRAM = " @listener.ora file (sucha as dg4odbc) "")
  Different gateways have a different name for the agent of hs created for the gateway. For example, Database Gateway for SQL * Server uses (program = dg4msql) and DG4Sybase uses (program = dg4sybs).
  Hs agent is the software that manages the communication between the Oracle database and non-Oracle database.
  HS heterogeneous services which is the RDBMS software layer that manages communications outside the database.

  Kind regards
  Mike

• Kobo e-reader is compatible with Windows XP Service Pack 3?

  Original title: Kobo ereader on Windows XP SP3.

  I am Microsoft Online Customer Service post this question on behalf of the client.

  The client tries to install Kobo e-reader on his computer that has Windows XP SP3. It seems that it will not recognize the product. She would like to know if Kobo e-reader is compatible and can be used with Windows XP SP3?

  Hello

  I recommend you contact Kobo support to get the necessary information.

  http://Kobobooks.com/touch_support

  Hope the helps of information.