HL 1250 printer with Logilink USB to parallel cable parallel

Similar Questions

• HP laserjet 1200 using windows7, wired to the printer with a USB to parallel adapter

  HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, if the computer is connected to the printer with a USB to parallel adapter. Sometimes works very well, sometimes States printer system as ready, but do not print. Reboot hardware and upon restarting, I got a page to print. Next attempt to print updates the document in cue, but is right there - no error message. Finally, after several reboots, I managed to do print (have no idea how), but now I had to print 20 pages one page at a time. It will print no more than one page, even if I have to print the 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, or are USB to parallel unreliable maps?

  Hey renradd!

  Unfortunately, in addition to the adapters USB can be unreliable. Only a new printer, I don't know what it will provide you with a fix for this problem. You can try a different card if you have one, but if it still does not work, I would look for in a printer capable of supporting your computer.

  I hope this helps!

• 2 PCs to a printer with Staples USB 2: 1 splitter - work light only one?

  I have two computers to a printer with Staples USB 2: 1 splitter but only one of the LEDs are lit and only that one works.  When I reverse the son again once the same side on works.  Is this new defective product or only light #1 and you must constantly spend to print from alternation of computers?  Thank you very much ~ is probably going to return the product because it does not work otherwise.

  Hello

  I got it now... did not know there was an installation CD inside packing... happy that I kept the package because I thought I was going to come back he ~ works great!

  Thank you

• Cannot print with printers USB XP

  I tried 4 different usb printers on my computer and none of them works. Windows detects the fine and installs all the drivers. But at the end it says that there is a problem cause the specified port is unknown. I finally contacted the printer company and they said it s only a problem with my computer cause it is no virtual usb port listed to select. How can I create a virtual USB port on the computer? I have all the drivers installed and functional usb including support of the usb printer. And they all say it works very well.

  some ideas here

  :en-GB:IE-SearchBox&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7GGLT_en&redir_esc=&EI=M4mXTdf4MoaAhQe30vX-ca http://www.Google.co.UK/search?q=problems+with+USB+printers&RLS=com.Microsoft

• F380 printer with a USB modem / router does not work as a scanner

  Hello, I have a Hp F380 printer I've always used on my PC, in Windows 7, via the USB port.

  Given the need to print and scan from another PC on the same router modem, I tried to use the USB port master who is mounted on my modem router (Alice Gate VoIP 2 Plus Wi Fi), to which I have connected the F380 to share with the new PC.

  I followed the steps in the manual installation of the modem and everything was fine except for the use of the scanner.
  The scanner, you can not use because the HP Solution Center does not see the device if it is connected to a USB port on the local PC (I normally, I used this for my scans)

  Even try to use scanning directly from the "devices and printers", click the right button of the mouse over the device icon in the menu window F380 does not appear the scanning features that appear in the place when the F380 is connected to a USB port on the local pC.
  I also tried to analyse using paint, Windows live photo gallery and scanner and fax in Windows, but the problem is always the same: the scanner is not detected.

  Do you have a solution for this?

  Thank you very much

  Hello

  The scanner cannot be access via a shared printer. The printer must be connected directly to the device, or you must connect using a standard network connection.

• HP ENVY 7640e: can I connect the printer with a USB cable in addition to the Wi - Fi

  I just bought this printer and succeeded in setting up wireless.  Can I now connect it using a USB cable?  If the answer is 'YES', just make the USB connection, i.e. will be 10 Windows automatically adds the printer, or do I have to re - run the setup software and select the USB option?

  I would like to have the possibility of having the two configurations available for me to pick, i.e. be able to select the wireless printer or USB printers.

  Thank you.

  Hello

  The answer is Yes, you can connect USB and wireless. 10 Windows can install a generic driver for you to print but envy 7640 has many features, so you must install drivers to allow you to print and scan locally using USB and printer software.

  You need to connect to wireless internet to be able to use its full functionality.

  Kind regards.

• New Firmware Canon (1.1.3) on Canon 5 d Mk III leads to problems with the USB Active extension cable

  At first I thought it was new version of Capture One Pro 7 or and the last update of OS X 10.8.3, but the camera is no longer connects to Windows 7 with a Capture One Pro 6.4.4 or 7.1.1. And this is always related to Windows 7. When I used a regular usb cable without the Extender everything has worked on computers and two software platforms.

  Please fix asap Canon and don't blame someone else cause this is without a doubt you do!

  You are right. After trying new camera on pc and mac, we tried a friends 5 d mkiii with the extension and it works. So, after spending several hours on it, I think it's the camera itself.

• Access to a wireless printer with an HP Inspiron 530 cable to a wireless router

  How to access a connected HP 8500 printer to a Netgear N300 wireless, WNR2000v2, my HP Inspiron 530 cable to the router?

  Hello

  ·         What is the exact model of the HP 8500 printer?

  ·         What is your printer support Wi - Fi?

  Method 1:

  You can read these articles and check if it helps:

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  For more information about adding a wireless network or a network printer, see install a printer.

   

   

  Method 2:

   

  Also refer to this article and check if it helps:

   

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01505180&prodTypeId=18972&prodSeriesId=25506

• No access to the personal files of Windows 7 to the disc format hard using a new computer that connects with a USB 2.0 cable to SATA/IDE in Windows 8

  I have a HDD that has been removed from a computer that does not work and I try to access my files staff on it. When the drive is connected, it appears as two items in Explorer: 'system Reserved (f)' and 'disk space (g) '. This drive has been connected to my new computer using a USB 2.0 to SATA/IDE cable.

  I can see all the program files and public folders in the path (g), but not one of my staff, including music, documents, photos, etc.. The path (f) does not seem to access anything whatsoever.

  My new computer using Windows 8, the hard drive, I'm trying to access Windows 7.

  This seems to be a security problem, that I have no idea on how to fix. I tried enabling 'total control' in the tab 'security' in the properties, what has not changed the situation.

  All solutions/advice would be much appreciated.

  Thank you.

  Hi David,

  1. What is the brand and model of the hard drive?

  2. do you get an error message/code?

  3 have you tried to connect the hard drive to a different USB port?

  4 have you tried the search for files by using the search function?

  This problem may be caused by the virus or files might be hidden.

  Method 1:

  Scan the hard drive for viruses:

  Reference:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  Follow these steps and check:

  a. press the Windows key + X

  b. Select Control Panel and folder options.

  c. in the view tab, select Show hidden files, folders and disks and click on apply and then OK.

  d. check if you can see the files on the hard drive.

  I hope this helps. If the problem persists, you can write to us and we will be happy to help you further.

• C6380 - computer laptop xp prints with connection by usb cable but not wireless

  Hello

  I have a c6380, which is about two weeks old. Setup worked fine when I put it on the wireless network and everything is ok.

  I installed the software on a vista pc which is connected by cable to my router from sky. This shows very well.

  I installed the software on a computer vista laptop that is wireless and prints well.

  I also have a computer laptop xp. It is also wireless. The software installed without problem. See the printer etc. However, when I try and print, the printer makes noise and pulls the paper, then the screen says it's printing and then nothing happens. The printer stays like that and eventually the laptop shows a failure to print the message. The document remains in the print queue before deletion, and I have to press Cancel on the printer. If I plug the printer with a usb cable for this laptopit prints without problem.

  I ping the printer wireless froom the laptop xp and access the admin screen. It also shows as a network drive in my computer.

  I uninstalled the software that came with the printer, downloaded the hp software to ensure that it is up-to-date and re installed.

  I put the printer with a static ip address.

  I restarted the router as well.

  The router uses a channel 11 broadcast key, wpa - psk and is set to g & b modes.

  Now, it's really really frustrating because the computer laptop xp my wife, is the main reason why we bought a wirelsss printer because she is a teacher and done loads of printing.

  I'm pretty good with pc / networks etc but have now run out of ideas.

  Can someone help me please?

  Thanks in advance.

  Steve

  Hello

  I've actually solved myself, but I'll keep this post here anyway.

  The answer has been upgraded from SP2 to SP3.

  Probably should have thought about that a little bit earlier!

• Problems when printing with USB or wireless - offline message

  Hello world

  I use a HP ENVY 4500 with a laptop Acer Aspire laptop and a desktop computer HP Pavilion 500, both with an Intel i7 and Windows 8.1. Initially, I configured the printer to work with both PCs wireless. The wireless network is provided by the modem of my provider (Telenet), so it is not very strong I increased it with Devolo powerline adapters. Print is fine, only when I want to print more pages then 3 print job is stopped in the middle of page 4. I get a message that the printer could not print the document, and the page comes out half print. I connected my printer with a USB cable and configured to work with USB, but also wireless. But that Don t always works, today, I tried to print a document from Mozilla Firefox and it would not start. The printer can be used on both sides without choosing the connection?  Also I get the message that the printer is offline and cannot print the document, even if it's actually printing.

  When I open the doctor print & scanning everything seems to be ok wth the printer, no defects are detected. Wrong me?

  Hello @DenOuwe and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you run into connectivity errors.  I would like to help.

  I would recommend using this thread on missing/partial prints & printer offline on Windows 8/8.1. by @JERENDS

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• printing with wifi

  Hello

  I was wondering if I put my 8600 Pro Officejet printer Conect to wifi that means internet will be all the time or he only be connected when we print something. Only, so we have a lot of time on our internet otherwise it costs more, and we don't want that. Hope you can help us.

  Thank you unchainedmelody

  Hi unchainedmelody,

  Welcome to the HP Support forums.  I think you are asking you if you connect your Officejet Pro 8600 to your wireless network if it will hire additional internet charges.

  The answer to this question depends on how you have your wireless network and internet access put in place. It also depends on who has the Officejet Pro 8600 that you configure.  For example, if you enable web services use ePrint, it requires internet access to work. If you are unsure about your internet use and installation, I would recommend that you set up the printer with a USB connection.  Who will ensure that you are in control of when the printer is connected to the internet.

• Agilent E3640A PSU with GPIB-USB-HS

  Hello all, I created an Agilent E3640A power control software standard interface GPIB. It works very well. Now, I want to replace the standard GPIB interface (with GPIB card) with GPIB-USB-HS adapter cable, so that I can send commands via USB connection, eliminating the need for GPIB card. How can I use my existing application to work with GPIB-USB-HS adapter cable? Is this a change? or I completely rewrite the code, and if so, are the drivers available for GPIB-USB-HS adapter cable? Thanks Jeet

  More information please.

  Have you removed the PCI interface before you try the USB interface? If this is not the case, your program may still try to access the E3640A on the PCI card.

  What is the USB HS recognized in Explorer measurement and automation as GPIB0?

  The E3640A knows if scan you for Instruments to MAX?

  What (number) error is raised during the execution of your program with USB HS?

  It would also help if you could show us NI SPY logs saved when executing your program with PCI and USB-Interface Card

  Usually you don't need to install different drivers, because the package NOR-488. 2 installs drivers for all variants of the NI GPIB hardware.

• printer problems / deskjet 5550 not work with usb to parallel / tried everything

  Hello

  Could someone please help. I'm not getting my old printer HP deskjet 5550 for work on an Acer ASpire 5542 laptop, I got the cable converter USB to parallel (1284) this morning - since... no joy in getting it to print.
  -L'usb parallel cable driver installed first during the connection that
  -L' printer was connected, then added via Device Manager "add a printer".
  -It has been added to the level local port and selecting a port usb001 or usb002 virtual printer (it's the usb/parallel cable)
  The printer is offline. A paper, ink - any installation to go.
  Can someone help me please?
  Thank you / simon

  Parallel USB cables can be problematic, and in this case is not necessary.  The Deskjet 5550 has a USB port (in addition to the parallel port).  Install the printer such as described in this page.

• How to set up a parallel printer to a USB port?

  Hi people... I'm putting in place our old faithful Laserjet 5 p with our new G70 using a USB to parallel cable, but nothing is. Any ideas on how to configure this odd couple so that they can live and work in harmony? My wife would ruin me rather than having to give up his printer.

  Eureka! The TRENDnet TU-P1284 Converter is a plug and play printer inherited to new computer of mating. As a reminder, I have a laptop HP G70 running Vista Home Basic and a HP LaserJet 5 p printer and when I wired everything up, the computer recognizes the printer, install the correct driver, and I was off and running. The adapter is less than $20.00 per Amazon.