HL-DT-ST DVDRRW GSA-H20L ATA write speed

Similar Questions

• HL-DT-ST DVDRRW GSA-H30L CD player does not open.

  Hello

  My CDDrive (HL-DT-ST DVDRRW GSA-H30L) has decided to stop working. I mean, when I press the button to open the CD drawer, the headlamp turns on, flashes a few times and then goes. The drawer won't open never and I do not hear sounds fron the CD player. Even if a CD is in the tray and the tray is closed, the CDDrive does nothing.

  Visually, the material seems well:

  Are no CD in the tray, the tray is not crowded and nothing seems broken.

  I was able to manually open the tray while it had not been authorised by using a paper clip in the hole of the front PIN.

  Power connections and motherboard work (the operating system detects the device and the cables work fine).

  I can turn on/off the device (which does not have an effect - the fire before CDDrive puts always when I press the Open button).

  I uninstalled and reinstalled the default driver of Microsoft version (21 January 06) 6.3.9600.16384.

  I tried to install the driver hp hower, this is not supported for windows 8.1.

  I noticed a red light coming from inside of the CDDrive. Maybe it's a sign that something is wrong?

  History:

  The CDDrive has worked well for most of his life. While it worked, he could read CD / DVD etc., no problem.

  The CDDrive began its life in my HP Desktop detail (a model ~ 7 years) and stayed there for most of his life. Since he was still working, I decided to bring it to a new computer, I built. For the month or two, I am using this new computer, the CDDrive worked very well. He has only stoped working today for reasons that I can't say.

  

  If anyone has any ideas on how to bring back to life, or they could use more information, please answer.

  Thank you

  I see comments on other issues on a DVD player using Windows 8.  Unknown reasons cause a disk working properly to stop smoking.  The firmware probably did not run due to the Windows 8 operating system.  Given that DVD burners are so cheap now, why not try a new? Examples:

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&DEPA=0&order=BESTMATCH&description=DVD+writer&N=-1&isNodeId=1

• HL-DT-ST DVDRAM GSA - T40N ATA Device works like a CD player. It is supposed to be a DVD player?

  Hello

  First of all, I would like to thank you in advance for your help.

  I had the problem of my HL - DT - ST DVDRAM GSA - T40N ATA Device not reading anything into the drive and removed the filters. It is still not working properly, and it's the rare occasions when he did (after hitting enough lol) and I needed it to work again. I disabled the device and rebooted before her reactivation. Although it works now it has unfortunately fizzled. It is now only installed as a CD player and it used to be a DVD player. Before it stopped working TI played DVD 100% fine as well so it should be good.

  Here is some info on my laptop:
  Model: Acer Aspire 5920
  OS: Vista Edition Home Premium
  RAM: 3 GB

  If you are in need of any more information do not hesitate to ask!
  Thank you
  Jack

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.cdfreaks.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Drives__Driver of standard CD-ROM: HL-DT-ST DVD + RW GSA-T21N ATA Device__Don ' t see games or media disc

  Standard CD-ROM drives
  Pilot: HL-DT-ST DVD + RW GSA - T21N ATA Device
  Don't see games or media disc
  tried to fill: volume information for this disc is not found
  With the help of dvd - rw external to play the game and crashes after 1-2 minutes after the start.

  Hi GJMac1956,

  Run the fix it from the link below and check if this can help: your CD or DVD cannot read or write media:http://support.microsoft.com/gp/cd_dvd_drive_problems

  Make sure you have updated firmware for the device, you may refer the below link:http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R172547&SystemID=LATITUDE%20D620&servicetag=&os=WW1&osl=en&deviceid=15207&devlib=0&typecnt=0&vercnt=3&catid=-1&impid=-1&formatcnt=0&libid=32&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=234725

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error on HL-DT-ST DVDRAM GSA - T20N ATA Device 10

  My CD/DVD is not present when I am exploring 'My Computer'.
  I can't read/play any cd/dvd.  In the 'control panel '.
  appears the device: HL-DT-ST DVDRAM GSA - T20N ATA Device
  with an exclamation point in a yellow triangle and a message 'Erreur10 '.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive

  
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HL-DT-ST DVDRAM GSA - T40N ATA Device Driver is not recognized

  Hi, I have an Acer Aspire 5920 and the HL-DT-ST DVDRAM GSA-T40N ATA device driver is not recognized.  I've uninstalled and restarted, without success.  I don't want to pay for a product fix cela, but can't find anything that I have confidence on the net - can anyone help please?

  Hello

  Try this:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  See also: http://support.microsoft.com/kb/929461

• What is HL-DT-ST DVDRAM GSA-4084N ATA Device?

  I have HP Pavilion tx 1000 laptop, with windows vista.

  He has "HL-DT-ST DVDRAM GSA - 4084N ATA Device"
  who is the DVD/CD drive. What is a DVD/CD only readable or writable? under properties is shows CD-ROM/DVD-ROM, but as part of the computer-under "devices with removable storage" window it says "DVD RW Drive (E :)". ». In Device Manager, the topic is of DVD/CD ROM drives, and if I right click on "HL-DT-ST DVDRAM GSA-4084N ATA Device" and click on properties, it shows.

  under the tab type - general motto: CD-ROM/DVD-ROM, manufacturer: (standard CD-ROM drives), location: 0 (channel 0, Target 0, Lun 0)
  under details tab-property-device discription,-value (it shows) CD ROM

  What is DVD/CD RW? or CD-ROM/DVD-ROM? or CD ROM?

  Generally, you will see that on the markings on the door. You will see, rewritable, DVD, RW, multi, etc...
  See this link:
  http://www.geeks.com/details.asp?invtid=BLK-GSA-4084N

  Yours might be a DVD-RW that can also use the RAM disk.

  Determine if your computer can burn CDs and DVDs
  http://www.Dummies.com/how-to/content/determine-whether-your-computer-can-burn-CDs-and-d.html

• HL-DT-ST DVDRAM GSA - T10N ATA not working

  HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot load the driver for this hardware device. The driver can be corupt or missing (Code39). When I check for solutions Windows says that the driver works fine and up to date. How can I get that back?

  Did you restart the computer after?

  In addition, were be UpperFilters or LowerFilters value in the registry key named?

• HD - DT % ST DVDRAE GSA-T20N ATA DEVICE failed

  Nice day
   
  I have acer laptop aspire 7520 Vista. I had a problem on my cd/dvd-rom. The pilot noticed says that "device driver software was not successfully installed and HD - DT-ST GSA - T20N ATA DEVICE DVDRAE % failed. I googled on this topic and I found a lot of solution, but it helped me to solve my problem. It gives me this:
   
  You must start regedit (start-> run (see screenshots below) type: regedit)

  Search the HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Class /.
  search for "4D36E965-E325-11CE-BFC1-08002BE10318.
  If you don't find anything, find only part of the string.

  now the UpperFilter propertys a LowersFilter to search and kill the value. If a single prop. is there, you have to kill only the value of a

   
  and I followed everything but looks the same. Cannot find UpperFilter or LowersFilter.
   
  I hope you can help me to solve this...
   
  Thank you. I'd appreciate all of your answer... God bless you!

  Please read the next page & run repair tools consecutively: (fix running, it is absolutely without, side effect may require reboot)

  http://support.Microsoft.com/GP/hardware_device_problems

  &

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  For more software related troubleshooting visits to:

  http://support.Microsoft.com/kb/982116

  S.Chatterjee

• LG GGW-H20L ATA use to work now, does not burn and no formatting Blue Ray discs but a DVD.

  I was burning Verbatim 25 G Blue Ray discs like crazy, as well as the monolayer regular and double layer DVD for more than two years and now it will not burn or format Blue Ray discs. It appears in my computer and it won't give me the options of the ISO image or Live to get in shape. I use both bury camera Panasonic and Adobe CS4 software.  I use only the part simple DVD sex the LG GGW - H20L ATA now. I tried several things here on the internet, but nothing works, nothing works yet. Even tried the new installation of Vista 64 and still nothing. I tried to reflash LG GGW-H20L-ATA with the same version of the software package.

  Anyone has the same problem or a solution? I need Blue Ray for my video business.

  Hi NewVideo,

  Try the troubleshooting steps suggested in thisthread.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

  The following is from http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.5-13-mid-2012-unibody-usb3-specs.html

  In addition, the 6 Gb/s it is SATA III

  Standard hard drive:

  500 GB (5400 RPM)

  Int. HD Interface:

  Serial ATA (6 Gb/s)

• SSD on MPB early 2011 (13 inches) slow write speed

  Hey all,.

  I installed an SSD Crucial of MX300 in my MPB 2011 (13 inches). I get that I have probably will not hit the read/write 510/510, said the player, but right now I get only a writing speed of 240 vs a reading of 470.

  Any ideas on why it's so slow?

  Thank you.

  What is it connected to internally? If we replace the optical drive, then it may be because it's a 3 Gb/s bus rather than the primary drive SATA 6 GB/s bus connects to.

  Do you have your repartition and reformat the SSD drive before using it? It is not unusual to see some write speeds slower than reading speeds. The MX300 is a new economic model that may be slower than expected in real use.

• read/write speed

  Hello

  I want to know how read and write speed of the last GEN TC?

  It varies a lot in fact.

  My TC Gen5 is written rather slow... 20 Mbps but playback is ok... around 40-50 MB/s

  Of course, it is via ethernet and is speed of copying a single large file. Several small files will go much more slowly.

• A6000 SD card write speed?

  What is the write speed maximum of internal A6000s... one of my friends offered to buy my current card at almost full prices. But there is no reason to upgrade if im already at maximum speed cameras (an example would be the Canon 5 d M3, which cannot write to SD card with about 45 MB/S)

  So, what is the write speed from MAX SDcard of the Sony (Ilçe-6000) a6000? is it not able to take advantage of a 280 MB/s of sandisk card?

  You can not buy a SD card that will not work in an A6000. If the card you get is capable of speeds of reading/writing that cannot the A6000, the A6000 can still use the card, and your next camera may be able to take advantage of the extra speed.

  In other words, which are always slower, either the camera or the card, which will be the limiting factor, which is ok, and if the card can run faster than the camera can manage, they still work together. And if the device can run faster than the card, the camera will slow down until no matter what the speed, the card can handle.

  Then buy the fastest card you can get and if your A6000 cannot take advantage of the extra speed, he can still use it, and maybe your A6000M2 will be able to use the extra speed.

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home