Home again...

Similar Questions

• Expected .dbf files copied from old house Oracle Oracle home again after an upgrade out of place?

  Hello

  I recently performed an upgrade out of place of Oracle 11.2.0.2 at 11.2.0.4 by following the checklist to upgrade Oracle (Doc ID 1276368.1).  While doing an RMAN backup, I noticed he was doing market back files .dbf since the old Oracle 11.2.0.2 rather than the new Oracle 11.2.0.4 Directory directory.  The .dbf files that are being backed up are not in the new Oracle 11.2.0.4 directory.  Must the .dbf files be copied to the Oracle of old House to the new House Oracle after an upgrade?

  Thank you in advance.

  2962490 wrote:

  11.2.0.2 oracle home directory is "db/oracle /.  11.2.0.4 oracle home directory is ' / oracle/11.2.0.4/db'.

  RMAN's backup of .dbf files to ' / db/oracle/dbs ' and ' / oracle, db, dbs, emtkorcl.  With the RMAN list command .dbf files in ' / oralce/db/dbs ' are not in ' / oracle/11.2.0.4/db/dbs' and there is no ' / oracle/11.2.0.4/db/dbs/emtkorcl' directory.

  In the checklist Upgrade Oracle (Doc ID 1276368.1), I could see not all the instructions to copy all the old Oracle Directory .dbf files to the new.  I was wondering if that is by design (.dbf files remain in the old Oracle Directory and somehow referenced in the new Oracle Directory) and what happens when I do a restore RMAN.

  > .dbf files that are being backed up are not in the new Oracle 11.2.0.4 directory.

  If you start working & only installed database 11.2.0.2 a new copy of the Oracle of 11.2.204, then of course there no data files in the new directory.

  Most people have NOT stored in/under ORACLE_HOME Oracle data files.

  There is no need to have the Oracle datafiles reside under the new Oracle 11.2.0.4 directory

• iPhone 7 Home button freezes

  While using my iPhone 7, I was in the mail. When I clicked on the home button to exit the messages, he did nothing. I continued to hit House and nothing. I also tried to turn if off and the power button was unresponsive. I waited until the screen fell asleep and pressed the home again, the screen came, I was able to reconnect and use my phone. You don't know why it froze and the home/power buttons did not? Help! My phone is not even a week

  I don't know why it 'frozen' or the other.  But a forced restart might help "reset" things:

  Restart your iPhone, iPad or iPod touch - Apple Support

• Untrusted connection error message on the computer at home, but can successfully connect to work

  I've been connecting to this site for some time without problem (a notebook online for school son), but yesterday when I tried to connect from machine at home, got "this connection is Untrusted" error message. However, I was able to connect without problems to work today, but having the same problem at home again. Is this an indication that my home connection is somehow compromised? How can I check? Other sites seem to be working properly.

  The server sends all the intermediate certificates?

  You can check the certificate through a site like this string:

  • http://www.Networking4all.com/en/support/tools/site+check/

• I can't turn off the automation in Touch ID & password settings

  I am on iOS 10, on the iPhone 6.  There is a switch that starts to turn itself on after I turn off manually.

  Under contact ID & password in the settings, there is a section called "allow access when locked. One of the lines that appears under Home Control (associated with HomeKit) there.  This is the switch has been set default to 'On', but I wanted to turn it off - I don't have/want everything home automation.  So I managed to get the cursor to turn off (very hard to get then move/stick for some reason any), and I can't see that it is set to off.  Yet if I go out and to return to this setting, it is auto-réactivé!  Why can not disable this option?  I suspect that it is a software bug.

  Well, I realized the part of it.  This Home Control button will be wobbly and continually be reset until AFTER you try to start the application home again (which will require you to turn on ICloud to House to do).

  Fact that forced initiation of enforcement of the House, then the entry of home automation under the section allow access when locked TouchID & password work really correctly (triggering the switch isn't more wobbly, and it remains the way it was worth).

  But it must clearly be a software bug.  It makes no sense if you want not to activate/use controls Home automation (HomeKit), you really need to turn on then turn off all...

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• House sharing is no longer present on my iOS devices (iPad, iPhone 6 +)

  I have no why I am able to connect my phone or my iPad to my house over wifi iTunes library like I used to be.

  all my devices are signed on my account appropriately, and all my devices and software is up to date.

  It has been like that for a while and I still think that the next update of software/iOS will be the fix that allows sharing home again. but, alas, no dice.

  y at - it a setting I disabled by mistake? why it doesn't works for me more?

  Windows 10 with iTunes 12.3.3.17 (64-bit)

  iPad 1 Air

  iPhone 6 +.

  help, please? and, thank you.

  Have you checked to make sure that you always have home sharing enabled in iTunes?

  Use home sharing to share content with other devices - Apple Support iTunes

  Are always signed on iDevices in settings > music > home sharing. Settings > videos > home sharing.

• Calendar cards Gets the wrong location

  If I open Maps, type in a destination and set it to go home' - it does - no problem.

  If I set a location to the calendar and travel time from home' - again - the arrow.

  But... Click on the graphic of map of the calendar to open cards, and suddenly I live half a mile from the destination (rather than 40 years).

  I tried - as suggested - change my contact card (I changed to 'Home' for the 'work' and changed "Rd" to "Road" - just so that I changed SOMETHING). Removed the appointment. Stop cards and calendar. Calendar has reopened and put in the nomination. This time I went "Home" - all good.

  Click on the open cards - this time I lived elsewhere. Still hurt and still less than half a mile from the destination, but bad nonetheless.

  I tried to put in a new destination directly into maps defining this route, then return to the calendar and redo the previous series of tedious actions: same issue - although sometimes I still moved house.

  This happened just after the last update - that was for Cyberduck! I suspect that they are not related. But I'm not, so understand what has happened to make the change.

  Any wisdom on this?

  Re: How can I change my "Home" location in the calendar.

• Satellite 1800-514-display is off every few seconds

  Yesterday, I have a Toshiba Satellite S1800-514. I have install the OS (Windows XP Home) again.
  Laptop screen turns off every few seconds. When I press the small button above the power switch (sensor for portable fence) there is a beep and the screen wakes up again.
  Same procedure again after a few seconds (5-50 sec).

  Is there someone who can explain what happened and how to fix this?
  The problem exists in all modes (Setup/bios dialogue, BACK, starting of WinXP, running current WinXP command prompt).

  Thank you!

  Hello!

  It's not easy to say what is causing the problem, it could be the inverter FL, chip graphic, LCD display...

  In your case, you should first test an external monitor. If the external monitor doesn't work properly, it s a problem with the graphics chip or motherboard. If the monitor does not work this is a problem of the FL inverter or LCD.

  Good bye

• Really, I have to allow a VIEW to read protected iTunes content?

  Hi, yesterday evening, I received a warning that the DISPLAY I use is not allowed to play iTunes protected content.

  I thought it was only the computers that require permission to read protected content. When did you start to my old TV which requires authorization?

  Details:

  Last year, I bought a subscription iTunes for season 6 of Walking Dead. I watched the first 8 episodes in 2015 not long after that that they have been made available on iTunes. Everything went without a hitch. Pretty much, have not used iTunes for anything except the music since then.

  Then, earlier this week, I received notification that the episode 9 was available. Last night I tried to watch via my iPad. The iPad is running iOS 9.2.1 and the episode downloaded without incident.

  I play the content by connecting the iPad to an old Sony LCD TV via a HDMI cable and adapter. The TV is more than a decade, he's not smart, but handles this sort of thing very well. Or it used to.

  When I tried to watch the new season pass episode last night I go down the next slap of iTunes: "this view is not allowed to read protected content.

  That's all. No help, no solution alternatives, just a brutal take down.

  Can anyone offer advice on what I can do to take back the apparently illicit act of watching iTunes protected content that I paid for and downloaded to my iPad for watching on my unsmart TV in the privacy of my own home again?

  Re: the connected display may not play protected movies

• I can't use my USB ports on my Satellite A30

  I tried to upgrade Windows XP Home to XP Pro on my Satellite A30, but he would not then allow me I formatted the hard drive and installed XP Pro on a drive and then installed the toshiba utilities and readers from the disc supplied. But now the laptop does not recognize my usb ports and I can't install my rinters and other prepherels. Can someone tell me please how to fix this? I have to re - install the XP Home again?

  Thanks a lot for your help in advance!

  Hello

  Have you installed Service Pack 2? What is with power supply for all your external devices? They have own adapter?

• MacBook Pro retina FaceTime Camera out of alignment / biased?

  I recently had the screen of my retina Pro Macbook (13 inches, end 2013) replaced a program of quality of Apple due to the wear anti-reflective coating.  However, because the repair was completed, I've noticed that the FaceTime camera is out of alignment and/or biased.  In other words, I have to move the computer a lot so that my face is centered on the screen.  This problem exists no matter how soft, I use (photo booth, Skype, FaceTime, etc.).

  Does anyone have experience with this problem and how to fix?  Thanks in advance.

  BabyDingo wrote:... Does anyone have experience with this...

  I've never known the specific problem you are reporting.

  BabyDingo wrote:... How to correct?

  Contact the service provider of Apple who worked on your Mac as soon as POSSIBLE.   Explain the problem and make an appointment for parts replaced to be checked and adjusted if necessary.

  
  

  Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for this next service visit.

  When you take your Mac once finished all the work necessary, ask the service provider to demonstrate the camera so that you know it works before bring you it home again.

  Post edited by: Jim EZ

  Mac OSX 10.11.2

• The Slim adapter

  Hello
  I ordered online a SLIM adapter, not yet, shipped, I noticed some specifications on the site it offers up to 18 VDC, but the X 61 I said on the bottom that it works on 20 VDC, who do I ask if he will be able to drive my X 61 Tablet? If this isn't the case, I could go home again?
  Thank you
  Halim

  
  

• Restore questions - anyone else?

  My husband and I arrived at the moment where an upgrade was due. Before picking up our new phones, I backed up my 5s using iTunes with no error and my husband saved her by using the LG software he had.

  Once at home, my husband used the LG software to restore its apps, etc... It was spotless and there was operational in 30 minutes. It's the end of his story. It just worked. My story, however, not so much...

  When I tried to restore my settings with iTunes, I got a half a dozen in the drop-down list of choices with the same name. There is no way to differentiate between them. We'll call this 'Apple fail #1 user experience '. Frustrated, I started working down the list of names to meet failures at every turn. I was able to locate the backup folder on my hard drive from the backup I made before my new phone, but there was no way to tell iTunes to use this folder (Apple fail #2 user experience). Finally, I arrived at what seems to be the entry related to the root of the correct backup folder, and tried to restore from there. After working for a while, iTunes doesn't have the process with "an error has occurred." What a mistake? Who knows. He did not. Error number? Nope. More information in the windows event log? No (Apple fail #3 user experience). You can also call this last part 'explosive software implementation' because if you can't bother to help the user solve their problem during an operation of such criticism, you have really no writing or software distribution company.

  Ok. Now, it appeared likely that my data was missing and I have to rebuild all of my apps, settings, etc... from scratch--by hand and it was entirely the fault of Apple. It's when I've reached the threshold of "25% of what I will switch to android next time." Then, noticing that there was a "restoration of the cloud" option and in a last effort to not have to rebuild all my content from gap, I chose it. It seemed to start and don't give me any errors, so I went about my business, while it worked. Enough of my apps were restored pretty quickly that I thought that the race was over and that this last line of defence had saved me, so I've calmed down and left the process to lament how the iPhone and iTunes experience has become in recent years.

  I live in the country and we have internet WiMax which is not so fast, is quite expensive, and has a 150 GB of data monthly ceiling before begin to charges by Go. Since I was moving a 32 GB is not entirely full-5s, I thought I'd be fine while restoring iCloud continued. Yet once... not so much. Over the next week, my family has noticed that the internet has been slower than normal but don't think it correlates with my phone. It wasn't until we got the opinion of our ISP we had managed to hit our cap of monthly data TOGETHER in a single week my husband started scouring the network for the offending device. PSI has provided a chart dated usage and - surprise - the valves open when the iPhone came home and was essentially at full speed all the time.

  Somehow, the iPhone--in its attempt to restore far less than 32 GB of data had managed to consume 150 GB of traffic. Happening all right beyond the 'Apple fail #4 user experience' only in order to "Apple apparently doesn't care any more." Thanks to this complete omission from Apple and only Apple - my internet Bill was higher that it should have been $ 45.

  But, it's ok. Live and learn. Everyone knows this kind of failure on many levels?

  Nope. Whenever I have restore from an iCloud upward, I do do so via a WiFi connection because the data rates and all that jazz.

  Sounds typical honestly, but then again I just run with most of the problems because I never assume that nothing is perfect or will work as expected 100% of the time. It's just technology for the yah!  But it's also my personal point of view.

  Sorry to hear about the hiccups, but at least you never know to restore from a backup of iCloud at home again. (Also to * with data-caps, they ruin any good on the internet.)

• HP Photosmart C4795 of only printing blank pages - including the test page.

  I have a Macbook Pro IOS 10.7.5.

  WARNING - I have had this printer for about 2 years and it is literally never worked for me. I finally gave up and its been sitting in a closet. I really need to be able to print at home again this is why I'm asking now.

  I have tried all troubleshooting ideas given to me by the HP site and nothing works.

  The printer behaves like its printing but springs from the white pages, including the test page. I connect via a USB port, so I'll make sure that I had a strong connection. I have new black and color ink cartridges.

  Help, please!

  I would check the printer without connecting to a computer first.
  Do not copy work? If copy does not ink on paper, you can be dead cartridges or blocked. There is an option in the menu Tools 'cleaning print head', if that is not printed a page, the cartridges don't work.