HOpw to resolve a device i/o error?

Similar Questions

• 15 15 HP - r208nl: start the device not found error (3FO)

  Hello

  I have this laptop from less-than-one-year-old (this guy: http://icecat.us/us/p/hp/l0n16ea/laptops-0889296492238-15-r208nl-26524145.html) and I have the Boot Device not found error infamous.

  I'm not sure if this is relevant, but the problem occurred a few weeks after the upgrade to Windows 10 (when bought, laptop had Windows 8.1, probably an update of Windows 7).

  Also, I noticed this basic operation to during the priming phase take a long time. For example, when I press F10, it takes about 1-2 minutes to bring up the BIOS configuration screen.

  There are a number of similar questions on this forum, but the proposed solutions do not apply to my case or simply do not work. Here's what I've tried so far, without success:

  • hard reset
  • reinstalling the hard drive
  • automated tools in the Recovery Manager (this tool you access by pressing F11 at startup) *.
  • chkdsk and identical from the command prompt (to which I have access from the Recovery Manager tool) *.

  Note that even if the material for the HP PC Diagnostics tool failed hard drive test, apparently I can access my files on the hard drive of a Linux Live CD/USB (I managed to access it during a previous attempt, do not know if it can be reproduced).

  I can't test the drive on other PCs (which I have another laptop which I can plug the drive may be defective), not I can try to connect another hard drive non-offending for verification (as I did not).

  Any suggestion?

  They gave me no installation CD/DVD (I guess I had to use the recovery partition). In case I need a new installation, how can I retrieve my serial number?

  the hard drive is not accessible, I can't access Recovery Manager simply by pressing F11, I had to use a USB recovery media

  CHKDSK and even produce this error message: "cannot open volume for direct access.

  It looks like your hard drive is not/is a failure. Guarantee would provide a new replacement - and probably send recovery media free since did you not make it yours.

  You can make a Windows 10 usb or dvd using the free download of Ms. No license key is necessary since it has been activated at the same time on the machine.

  https://www.Microsoft.com/en-us/software-download/Windows10/

  Read the guide here by reinstalling an previously active Windows 10:

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

• Problem of DVD - RAM Equium A110-233: "device i/o error".

  Hi, I recently have not been able to play audio CDs using my DVD - RAM drive and would be grateful if someone could help out me. When I inserted an audio CD to play on one of my media players, the disc doesn't show and read that there is "no disc in drive D:". This has happened on both of my media players and has therefore decided to load it manually via my computer, when I clicked on the icon on the player it read that it was not accessible because of a "device i/o error", however the reader will always read DVD and CD, the drive to read also played fine Audio CD yesterday and up to this point. I was wondering if someone could give me advice on how to solve this problem, thank you.

  Hello

  I will also propose removing the drive from the Device Manager.
  In addition, you can view the properties of the drive. Simply by right clicking on the drive and choose Properties.
  Arrived at the Hardware tab, and then select the drive again and use the properties button.
  Then a new window should appear. Go to the Properties tab and check if the option called enable digital CD audio for this CD-rom device has been marked.

• We get an error "D: / is not accessible." a device i/o error"when trying to access hard drive

  * Original title: e/s problem

  I am not able to access my hard disk.windows that says: -.

  "D: / is not accessible." an i/o device error. "

  I also tried chkdsk but it says that it is not directly operatable.

  Hi Rishanpc,

  Thanks for the post. I am sorry to hear that you found a mistake "D: / is not accessible." a device i/o error"when trying to access hard drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

   

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. have you checked if the cables are connected properly?

  2 what is an internal hard drive or external?

  3 have there been recent changes made on the computer before the show?

   

  The most common cause of a non-accessible i/o error is a disconnected cable. When the computer tries to access a device, and it's no response after several tests, it will generate this error. Another common cause is when a program tries to access a file that has been removed or eliminated.

   

  Disconnected Hard Drive/cable misconfiguration

   

  Internal hard drives require a specific set up. IDE hard disks can have only one master. If another hard drive has its defining together correctly pin code, a user is perhaps not able to access the data, and he will receive a message that the drive are not available. Cables come off inside the case of the computer also cause a not accessible i/o error. The user can correct this problem by opening the case and attach the data cables for each drive safely at the back of each drive and the motherboard.

   

  You can follow the steps below and check if it helps.

   

   

   

  a. go to "Control Panel" in the start menu and choose 'performance and Maintenance '.

  b. click on 'System' then go to the Hardware tab and click on "Device Manager."

  c. find the device that records an error by developing the appropriate category nodes. If the device has a red "X" on the icon beside its description, the hardware is disabled; Go to step d to activate it. Otherwise, go to step e.

  d. go to the general tab and click on "Activate the device" found in the device status section. then press 'OK '. (Note: you may need to follow the guests, as indicated via an assistant of favorable device.) If you do, continue to click "Next" and follow the instructions until the process is complete.) Test the equipment. If an error is displayed, go to step e.

  e. click the general tab and click "Troubleshooting" found in the device status section and then press 'OK '. Follow the prompts to fix the problem. If an error is still displayed, go to step f.

  f. click the driver tab and click on 'Update driver'. Follow the instructions until the process is complete and then to test the equipment.

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I'm trying to send some files to an external drive but error message: device i/o error.

  I have an external drive that is used only for embroidery designs. I am trying to send a few folders on the drive but get the I/O device error message. What should I do to fix the error?

  Original title: error message: device i/o error.

  It may be a cable, a system problem or failure of the HD.  You have saved the data?

  You can test the drive by running chkdsk /f as indicated below

  A CHKDSK F: /R

  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found when chkdsk attempts to repair this sector all the data available in this area may be lost.

  Run CHKDSK/r/f of a high (run as administrator) command prompt.

  Do this for each hard drive on your system.

  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.

  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.

  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  B Elevated Command Prompt:

  Click on start and type "cmd.exe" (without the quotes)

  At the top of the search box, right-click on Cmd.exe and select "Run as Administrator"

  C CHKDSK LogFile:

  Click Start and type "eventvwr.msc" (without the quotes) and press enter

  Expand the topic the Windows logs, and then select the Application log file entry.

  Double-click the Source column heading.

  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).

  Copy / paste the results in your next post.

• What is a "device i/o error. (0x8007045D)?

  As I'm trying to back up my computer using the CD - RW disc, the results are:

  "The backup was not completely successful.

  An error has occurred.  The following information can help you to resolve the error:

  "The request could not be performed because of an i/o device error. (0x8007045D).

  What does that mean?  Is there something wrong with my computer?

  Hello Mamiskorason,

  The disc you use should be fine but set the speed to 8 x, since that's what your drive is for. In general, you will receive an error or the disc will be empty if you are having problems with a disc.

  • The brand of the disc may be incompatible with the burner. Try a different brand of media.
  • The disc may be defective. Try another disc.
  • The burner can be due to a malfunction. To correct this information, see the documentation that came with the burner.
  • The burner or the disc is not compatible with the speed that you used to burn the disc. Try using a slower speed.

  When you try to perform a full backup on a Windows Vista-based computer, you may display before the first disk backup ended following error messages:

  The request could not be performed because of an i/o device error (0x8007045D)
  Please rerun backup once the problem is resolved.
  Attatched is the link to fix this and other troubleshooting if you encounter other problems.  Please let me know if this has corrected the problem or problems again.
  http://support.Microsoft.com/kb/952272

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Initializing the hard drive ERROR... (a device i/o error)

  Separated from this thread.

  I have the same problem with a SSD 8 GB chip on the motherboard, designed to function as a "Cache Express".

  Disk Mgmt reports 'unknown, uninitialized, unallocated '.  Still to be resolved, I get the error of e/s as stated above.

  It worked FINE until I used Device Manager to "disable."  Since then, I had to do a total reinstall of win 10, it would "reactivate" hoping.  There can be no.

  How can I get rid of the IO error?

  Thank you!

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  To better understand the issue, I would ask you:

  • What is the brand and model of your PC?
  • If this is a custom built PC, what is the brand and model of the motherboard?
  • Are you able to start on the screen when you start your PC, with the SSD chip enabled?

  Given that the problem you are having is with the SSD chip on your motherboard, I suggest you to update the chipset drivers and test if it works very well.

  Read the following article and update all the drivers available.

  How to: install and update drivers in Windows 10

   

  If you are unable to find the drivers for Windows 10, you can try to install the drivers in compatibility mode with Windows 8.1.

  First download the driver from your computer manufacturer's website and install it then.

  SE refer (make older programs compatible with this version of Windows)

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Note: This link also applies to Windows 10

  Let us know the results. Do not respond with the required information, we will be happy to help you.

• Windows media player will not sync with my device rises the error in the status of the synchronization

  I ripped a cd to my windows media player - I then entered in the sync tab and dragged the album I had just torn off sync - it comes then a full synchronization, please click here for details when I click this, it displays error - I clicked on the Red 'x' and read the following it is not possible to get the certificate to the device. Contact the device manufacturer for a firmware update or other measures to address this problem. My camera is a Sony Walkman - I have previously synced

  Hello

  Thanks for posting the question to Microsoft Community.

  Let us try the following and see if that helps:

  Method 1: To resolve the problem, try to disconnect and reset.

  See your device manual for specific instructions on performing this procedure.

  Method 2: Check on the Sony Web site for any solution on this, also try to update the drivers for the Sony Walkman device firmware.

  For more information: Understanding sync errors and warnings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-sync-errors-and-warnings

  Note: The article above also applies to Windows 7.

  Windows Media Player sync: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/Windows-Media-Player-sync-frequently-asked-questions

  Hope this information helps. Response to help you further.

• Booklet - USB device not recognized error message

  Hello

  I have a workaround for this problem that occasionally occurs. It's just to reconnect the USB hub (as recommended by Windows). I was wondering if anyone knows why this happens and how to fix it. The error is: -.

  "Unrecognized USB device. One of the USB devices attached to this computer has malfunctioned and windows does not recognize.

  Roob (2 ports) USB hubs - unused Port, unknown device.

  Recommendation: try to re-connect. If Windows does still not it, replace the device. "

  I can't wait to hear back on your part.
  Kind regards
  Julia.

  Hello Julia

  It is always advantageous to mention which model you have exactly. Of course the external device is not correctly recognized. Check if there is a driver that must be installed before you can use it properly.

• Satellite P20: Device i/o error - drive will not read anything

  My bed dvd player is nothing. She made some attempts to turn the cd and then give up. Click the icon of my computer dvd player gives me an i/o device error message.

  I had these problems early, holding the disc and pushing rapidly solved. Now it does not work even if I use different user names and the different internal hard drives.

  What I have to buy a new dvd player or can it be repaired? also, would it not a motherboard problem, which means that I should probably get a new laptop?

  Thanks for any help,

  Andrew

  Hello

  I put t think that this drive problem has something to do with the motherboard. The operating system is running properly and I think that you have only one problem with your CD/DVD drive.
  Unfortunately, I put t hear it is possible repair. It is perhaps possible to s, but I think that costs are too high to do and this is why the new replacement drive is always advised.

  You can try to remove the drive from Device Manager and then after reboot the operating system should recognize it again. You can also try to clean the lens but I n t think this will solve anything.

• M300 DVD device i/o error

  Hello
  You just bought a M300. Having problems playing DVDs. There is no problem reading CD
  Get an i/o device error. This could be a hardware or software problem?
  Best regards / jesper

  Hello

  If the device has the factory settings it should not happen. Please contact your local dealer and clarify this point. The unit is new, and if you manage quickly you can ask for a replacement.

  Good bye

• Qosimo G20: Device i/o error - DVD drive does not read CD

  Hi, im having a problem with the dvdrw drive on the G20 PQG20E Qosimno, it does not read discs, the only drive that reads without problems is to restore dvd and Heroes (dvd movie) and origonal CD, it does not read any cd s that are not original.
  I get a "D:\ is not accessible.
  The request could not be performed because of an i/o device error"

  Anyone have any ideas?

  Thank you!

  Simon.

  Hello

  I guess the discs not all burnt gift? t working in this player.
  I know that not all media work on all players. In the manual, you should find a list of tested and good work supports.
  I recommend that you test the CD and DVD that is recommended in the user's manual.

• device USB 43 error code

  Ive got a didital nine unused usb just lost the manual photo frame, ive plugged into my laptop and windows tells me there is a problem with it (code 43) what is the code 43 and what can I do to use my unit ive tried updating drivers and it still says theres an error please help! Thank you

  Hi Paulwhitaker,

  You can read the following article and try to run the fixit of material.

  Hardware devices do not work or are not detected in Windows

  For more information, you can consult the following article:

  Code 43: Windows has stopped this device because it has reported problems

  Hope this information is useful.

• Message error "the driver detected a controller on \Device\Harddisk5\D error.

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  In the observer event system log I get errors saying "the pilot detected an error of the controller on \Device\Harddisk5\D. Sometimes these are the 2\D or 3\D or 4\D instead of 2\D. Aid says it's a break in the cable, but I tried new cables and old that work before. Help

  It could be malware believe it or not. It could also be a failing hard drive. I recommend that you first scan your computer with scanners on the links below ensuring that update you before the analysis.

  Malwarebytes.org

  SUPERAntiSpyware.com

  If the scans are own return, you will need to go to the website of the manufacturer of your hard drive and download the diagnostic tool for your hard drive. It will probably take an iso that burn you to a disc and make it bootable. Let me know the results of the analysis, and we'll go from there.

• Windows XP does not recognize the iPhone - device not recognized error

  I am running Windows XP (SP2 I believe) and whenever I plug in my iPhone I get the error not recognized USB device. If iTunes does not recognize it and I can't sync. My guess is that I'm missing or have an updated driver, but I don't know how to install. If it makes a difference, I am using a brand new MacBook Pro and Windows XP via Parallels Desktop. I don't think it's the question, though, as I used to be able to sync with my Manager (ACT!) contacts via Outlook. It seems to be simply a function of Windows is not able to identify the iPhone via USB. A simple solution would be appreciated, but I'll take complicated if that's all that's available.

  Hello abogadopeter,

  Thank you for visiting the Microsoft answers community.

  This question has been a known issue that seems by Parallels. I did some research and read through some of the threads for workarounds. He doesn't seem to be a conclusive solution, but works to some extent. You can take a look at http://forum.parallels.com/search.php and simply search for ipod and look through some of these institutions.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.