Horrible noise popping up on two rockets

Similar Questions

• noise pop/crack on Inspiron 13 7368

  I have a 1 - month old DELL Inspiron 13 7368 with Windows 10. Whenever the computer beeps or starts to play an audio file or video there is a click, then the sound starts without the first second. The click is like unplug an audio cable with a public ADDRESS system.

  It seems to me that some software sometimes mutes the sound. This effect is very unpleasant when the computer is connected to a public ADDRESS system that he frightens the people around death.

  There is an ad with the same problem at tomshardware forum.

  Please help me to solve the problem with this crack sound.

  Hello

  I suggest to update the BIOS and the audio driver on the system. Please enter your service tag # on the link below, select the operating system, then download BIOS BIOS audio driver and the section audio section on the system and install it.

  http://Dell.to/18r60nI

  Please let me know if it helps.

• Help! Blackbird 002 - 01b makes horrible noise when starting

  I have a Blackbird 002-01 b with a card mother eVGA 780i NV. When I flip the switch on "on" at the back of the power supply, LED MB internal lights up, but nothing on the front. It will not be powered by the power button, but I have to use the power button on the motherboard. As it starts, there is a strong ongoing high tone that does not stop.

  Any ideas?

  Thank you!

  id355

  Hi id355, glad to hear you are making progress. You can check the cables on the HDD and the DVD player. Make sure that the hard drive is connected to the first port on the motherboard sata and DVD player is connected to the second track, if these are the only drives in your system.

  You must then enter the BIOS and make sure the first boot device is the DVD player and the second boot device is the SATA hard drive...

  If the operating system is installed on the SATA hard drive and it is intact and non-corrupt, and there is no CD or DVD disc in the optical drive, the system should start on the hard disk and the desktop computer.

  I hope this helps.

• Terrible noise on my Satellite M30X

  Hello!

  I have a M30X, I just fix to add little RAM and substitute the dvdrw, and I asked them to clean the fan because I was getting a terrible when noise the fan kicks in. I went tonight and after 2 hours of work, he started making that horrible noise that I still have to close or my mother from the next room will hear it.

  Is it possible to solve this problem without having to repair itself again? I don't want to put my laptop on the technical support every two days...

  Any help would be great!

  See you soon!

  Hi Tomas.

  I assume that your noise is caused by a dry bearing in the fan, if short of replacing the entire fan, you can try to spray a small amount of lubricant of contacts electric in the fan area to try to alleviate the problem.

  Kind regards

• Satellite M30-344-CPU cooling fan noise

  Hello world...
  I have a satellite m30 344... it is 1 1/2 year... and now, I had a problem with my cpu... fan is making a horrible noise... and the air flow is not good...

  I'm looking for how clean my fan... I removed the keyboard and I also took into consideration... but could not find any access to the cpu fan...

  can someone make a suggestion how to clean the fan to the processor in my laptop?

  THX
  ascorbin

  Post edited by: ascorbin

  Hello

  In my opinion, it's a very bad idea to open Notepad on your own. As you know that books are very sensitive units and if you have no experience you shouldn't do this. I guess that the guarantee is valid for two years and open Notepad, you can void your warranty.

  I'm sorry, but I put t see any means cleaning without dismantling because there is no cooling grilles of ventilation and air in the lower corner. On some laptops from Toshiba, the of cold air is visible and the cleaning procedure is much easier.
  Before doing something wrong contact partner in your country. It is also possible that there is a problem with the CPU fan and it can be exchanged.

  Good bye

  Post edited by: Barrie

• The screen of his iPhone 5 c popping

  Hello world

  Exactly a year ago, I received a brand new 5 c 8 GB via studentmobiel.nl iPhone. The provider that is with me is Ben, and I live in the Netherlands.

  Today, I learned that my screen sometimes ticks/pop when I press on it (when I type, for example). First, I noticed the noise, a week or two ago but blamed it on my bumper, only to find out that he always does the sound even when the bumper is off. After some googling I found more people having the same problem: the general idea seems to be that the screen is not fixed correctly, or loose, and most of the posters had their phone repaired or replaced during the visit of a Genius Bar. Even after the period of 1 year.

  I tried to make an appointment with the Genius Bar in the Apple store in the Hague to see if he might still have something they can do about it (this cost me a serious amount of money). The phone has the user damage all over, but was in a bumper during half of the year.

  However, the site of Apple keeps throwing error messages telling me ' Please try again later "(apart from the fact that I'm continually referred to the page"what's wrong with your Mac?"every time that I select my iPhone in my product list). I'm starting to get a little desperate. Is there anything else I can do or try?

  Try going to this link and choosing a store. From there, you can click on the recording of the Genius Bar. I can't read them all, but I know that this brings you to the page of access to the Netherlands. So who can not do, then call the store. You also have the option to use the Apple Store app on your iOS device to access the store and make a reservation. https://www.Apple.com/NL/retail/

• Satellite A100-998: speakers make noise when it is on current alternative

  Hello, I have a
  Satellite A100-998
  Part number: PSAA9E-0PP044EN

  My speakers make a horrible noise slope high when the laptop is plugged into AC power, but not on battery power. It happens through my integrated sound card, my soundblaster card external as well as the headphones on both ports, and they have all the latest drivers anyway, so the problem is elsewhere. Noise appears on the windows out vague, i.e. all inhibition does not, nothing 'generates' sound as a program that runs in the background.

  Can anyone help? Here is a link to the noise, I recorded with helmet attached to the microphone port, it's quite quiet, you may increase your speakers to hear it. Link: [http://rapidshare.com/files/114859161/noise.mp3.html]

  I guess it's a kind of interference, but I'm a software guy, I don't know about these sorts of things.

  Thank you
  Andy

  I doubt that the software could cause this kind of thing, looks like it could be a problem of ground or a component of the motherboard.

  I take it to a service center and get them at a glance.

• X 200 horrible experience

  I just wanted to share my story being horrible Lenovo tech support:

  There was a progressive degradation of the LCD... of hundreds of blackheads started appearing on the screen. Laptop sent to the "DEPOSIT" for repair and he returned with a different screen problem, and it has been implemented badly. The bezel around the screen was curved and it was horrible noises when you open the form. He returned in the DEPOT on 3 December. This time, he was there for a month. They broke the Palm by repairing and then ordered the wrong part to fix it. It's at the station, from the 4th until 27 October. He returned with a broken rest (my request that I asked them to send the part directly to me), same problem LCD screen, same problem of domed bezel, a deep scratch down to the metal at the rear and a faulty keyboard. I was then able to escalate the call they have finally allowed me to speak to a Manager and someone came to fix it on the spot. There not all parts to repair the laptop and while blocking it with the parts he had, he cut the cable of the wireless card. Naturally, I complained and they said that the technology was the best person on the spot they had in the DFW area. He returned with the rest of the parties and went wrong fix... more things break. Now, the LCD is still messed up (color disappears from half of the screen if the screen is barely touched), the camera is broken, the collar is striped and bulging in places b/c the tech did not match or beat some of the clips... the rear panel does not correctly with Ruff... There is no stickers on the machine (just the holes where they are supposed to go) and the keyboard is still defective. In addition there are problems cosmetics such as scratches and stripped live on my laptop once Virgin. They don't give me credit or a new machine and now the laptop is shipped to an engineer in North Carolina, but he is expected to take at least a month to fix. The laptop has had 5 repairs (one of them being the repair rest of palm by myself) and headed the 6th repair. I am very disappointed in Lenovo and have been able to get real help. The laptop is in repair more time that I actually used it.

  Jonathan,

  I sent a PM with alternatives for resolution.

  Thanks for the comments

  Mark

• Canon 6 d noise long exp with high iso speed

  Hello

  I would like to know the 6 d can I adjust on the noise of long exp with high iso speed and raw?

  Thank you.

  If you mean high ISO NR Don t speed you should use it with raw. I know that he doesn´t whether you have enabled or disabled. Only if you shoot jpg.

  With raw, you can still enable or disable high speed ISO NR in Canon's Digital Photo Professional or noise reduction in another raw converter.

  

  As written TCampbell long exp. noise reduction will take two images and remove all hot and dead pixels. RAW converters often have stripper hot pixels.

  Another thing to do to make less noise is to keep your cold camera sensor. It's in Swedish, but you will understand the temperature in degrees Celsius. Live view mode will heat the sensor, so Don t use Live view for minutes before taking a longer exposure. You can check the temperature inside your camera with an exif viewer. I Don t know where inside temperature is measured.

• Security Scan Pop Ups

  I get RegWork pop ups (every two minutes or more) and I never installed it.  I tried to delete the associated files (I think that PC Max) and it always happens.  What can I do?

  Hello

  You should NEVER use Registry cleaners.

  Use the version FREE of Revo Uninstaller to remove:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  And scan your system for malware:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• HP Photosmart printer: transport stuck, makes terrible noise but does not in the book.

  HP Photosmart C5280. Transport makes a horrible noise, but cannot pick up any apper. What should do?

  It seems that there may be a foreign body stuck in one of the rolls, the transport route, or a gear is going/gone bad.

  Have you tried to remove all paper from the input tray and the control of the front of the rolls?

  Have you removed the back of the printer to ensure that nothing is stuck to the back of the unit?

  In addition, there is a document covering troubleshooting paper jams.  This may or may not be a paper jam, but the steps of troubleshooting for a noisy product will be the same.  Click here to access this document.  There is also a document to this printer which covers when the unit doesn't feed paper.  Click here to access this information.

  I hope this helps.

• Captured radio noise

  So, I recently did a video shoot where my wireless microphone picked up a radio throughout the entire video station. Radio noise was picked up on the L and R channels, but the audio that I want to keep was only picked up on L is it possible to isolate the R and use it as a noise print to remove two channels in order to preserve my audio? I work in the hearing CS6 thanks!

  If the signal is truly identical in both channels, you can possibly use a paste invert to remove it.  It would be experimental surgery and may not work, but it is worth checking.

  1. open the file and disable the left channel by clicking on the [L] button to the right of the waveform.

  2 Select all and copy to the Clipboard.

  3. turn again on the left channel, disable the right channel

  4. make sure that the playhead is at the very beginning of the file and select Edit > Mix Paste

  5. Select "reverse copied Audio" and click OK.

  Who should apply a signal reversed the truck radio on channel which also contains the desired signal.  If the two strings are the same, this should minimize interference.  If this isn't the case, then it will be a terrible and you need to quickly CANCEL the foregoing.

  Then, I would say that the steps above, but select the right channel and capture it as a sound impression, as you suggest.  Then turn on the left channel and open the overview and the noise reduction effect.

  If the signal is most obvious during the silence between intervening on the left lane, you might want to try the dynamic effect of transformation to create a Noise Gate, which passes only sound when it is above the level of the radio signal.  It is not the optimal solution, but we can try if none of the above suggestions is successful.

• Satellite Pro M40: crackling sound appears

  Every two days, I have reinstall my sound card, as it begins to do horrible distorted, scraping noises. Curiously, Media Player plays very well, but other things - Windows sound effects, games - making that horrible noise.

  Receive the latest drivers. Any suggestions?

  Hello

  On friends M40-101 is everything is OK. It is really strange. Virtual sound on or off?

  Also check the settings of the fashion map its power and set it to no energy saving.

• Audio beats - terrible on m6-k022dx want to

  So I bought this HP envy m6-k022dx (with beats audio logos on the console monitor left high side and speaker) end of last week, but to be honest, the sound output of this thing is so bad im about to return to the store.   I noticed this first horrible noise when you try to play music on computer speakers and my external speakers on Winamp specifically who have performed wonderfully for me in the past.
  
  The first notable thing is volume is flat no matter how strong or weak a song is, it seems to try dynamicaly adjust the volume so its always the same, which means in acutallity im constantly hearing fluctiations of volume, although there is no significant volume range or musically no cd quality or even near beach of studio quality.   Secondly im low tonal hearing a treble - permanent or dynamic adjustments distorting the sound quality until the music is unrecognizable as an entertainment product.  I can't use the Winamp Equalizer because it seems to be the block and bat Equalizer does not work.   Songs are almost unpleasant to listen to, even with my external speakers or otherwise.  These negative issues do not appear to change significaly using any other music player.  I don't know how else to say to insist on the fact, but it does not work, at least not for the human ear.
  
  Ive seen other similar comments on the similar HP products on this 'Beats Audio"- since the purchase of this and now I'm having some serious remorse on this purchase.   Is there anything I can do to get rid of this terrible audio product? For example can I replace some drivers create the 'beats' audio effects and remove the beats or im will replace it and restart my laptop search.
  
  A bit independent but related OS question, is there something to do about the features of windows 8 on this PC with regard find the start menu, did an update to correct the lack of office start like in the previous versions like xp vista 7 Windows ect. ???  Forms to find the files that I was transferred to it are clumsy and dumbed down by the methods provided in my opinion.  Second, unrelated to the other two questions, I guess Im not a fan of the unique combo with a click on the device and the touchpad.  But these last two things side may not be enough to make me return to this computer.  The first, however.
  
  Bottom line for me... Not a far pleasant buying experience, lets see if we can fix it.
  
  Thanks in advance for your help
  S

  Hi supercellman, sorry to hear that you encounter some problems with the audio on your computer. I did some research and I noticed that it could be a driver problem. Here is a link to take you to the IDT High-Definition Audio Driver.   http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-119579-3&cc=us&DLC=en&LC=en&OS=4132&product=5447319&sw_lang=

  If this does NOT resolve the problem, please let me know and I will try another option.

  Thank you

• TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

  My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

  Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

  As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

  I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

  This left me confused.  If there is a problem with this device, no solution seems to exist.

  Any help that will allow my laptop to function normally is welcome.

  I understand that you want to know if the teredo adapter can cause performance problems.

  The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

  This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

  If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

  Furthermore, does this happen that the adapter is connected or not?