How open/forward ports on a workstation?

Similar Questions

• I can't figure out how to open the port of CD.

  * Original title: CD player

  I can't figure out how to open the port of CD. There are no buttons, and online forums have not helped. Any suggestions?

  Of course - just go on this PC (or computer) and r / click on the DVD/CD drive - you should see "eject" as shown below. Usually there will be a button in the center of the disc too... but sometimes well hidden tray! -Ric.

  

• Try to open the port or do port forwarding for update of the game client (improve the download speed)

  I recently participated in the beta FFXIV and im not to attempt to update the client. It happened for a day now and im only at 78%. I looked on the forums on the site and he told me I should do port forwarding and ill be able to download the updated much more quickly. So my question is how do I port forwarding on a router NetGear on Windows Vista.

  Hello

  Ports must be sent to the IP of the specific computer.

  A specific port can only be transferred to a computer.

  He must be facing forward in the router and also via the firewall software.

  Instructions depends on the specific router you have (the manual force) be useful and the specific firewall software that you use (using the software may contain instructions).

  This site is the champion of port forwarding, http://portforward.com/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• What are the security risks to open port 80 on workstations?

  Hi all

  in our environment, there is an application that opens port 80 on workstations when it is installed, but it is not allowed on preimeter FW

  could you please tell what are the security risks for leaving port 80, opened on the workstations? or it is considered to be safe unless it is not allowed on the preimeter FW?

  Thank you & best regards

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Firewall: How to open a port tcp inside and out on a single line

  How can we combine the firewall command to open port 80 to tcp in and tcp out without having to publish twice?

  esxcfg-firewall - o 80, tcp, in, web

  esxcfg-firewall - o 80, tcp, out, web

  N ° because it is a completely different situation.

  When you open in port - allow you to access port 80 on the local computer from the network. When you open port - allow you to access port 80 on remote computers from the local computer. Usually there is no need to open the ports both in.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How to open a port that is closed? Have Vista Home premium 64-bit

  I get this message when you try to get to oracle - OEM
  "Ip_address here" is not set up to establish a connection on port "5500" with this computer. The ip address is the address of the local host - all on a single pc.

  It was woprking then I changed my security/antivirus software and the port is closed.  I uninstalled the new software and the port is always closed.

  Hi Ames66,

  It happens more often because the firewall blocks the program and to allow that program to communicate through the firewall, you can usually do that by selecting the program on the Exceptions tab in Windows Firewall.

  If you have Windows Firewall on your computer, follow the steps in this link:

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-a-port-in-Windows-Firewall

  If you use a third party firewall manually give exception to the program.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M1 - Modem does not work (could not open a port)

  I have a problem: after you have reinstalled Windows XP and on my Tecra M1 drivers, modem does not work. It can not diagnose himself - he always comes a warning: "cannot open a port (COM). It can be used by another device or application. I installed the latest Toshiba drivers for the modem, but nothing changes. How can I solve this problem? Looking forward for your advice!
  Best regards.

  Hello

  Have you installed the drivers in the correct order? Not? So do it!
  Have you installed the software or additional devices which could have a bad influence on the modem?
  Check the status of the modem in Device Manager. You don't see any yellow exclamation?

  Try to start the test on the modem within the operating system.
  Check the operation of the Modem under
  Start-> Control Panel-> phone and Modem Options-> Modems tab-> properties-> Diagnostics
  by pressing the 'button interrogate Modem.

  If the information window about the Modem contains a list of COMMANDS (including ATI2, ATI3, ATI4 etc.), then the modem is installed correctly. The ATI5 command ends with the number for the parameters selected regional (for example Germany = 06).
  To change the regional setting please use the Toshiba Internal Modem region Select utility.

• Unable to forward Port 5900

  Hi, I think I tried everything I could think to forward port 5900 with no luck. I have e4200. This is for the purposes of RealVNC. I followed the steps from here:

  http://PortForward.com/English/routers/port_forwarding/Cisco/Linksys-E4200/RealVNC.htm

  I have windows 7 and internet safety of nortn. I've disabled the firewall and added a rule to redirect port 5900 under windows but does not help either.

  any idea what else do I do? Thank you.

  mani99 wrote:

  Thanks for all your replies. However, pfporterchecker has always said that the port is not open! Here's what I've tried so far:

  -reset the default router

  -windows Firewall includes the exception for port 5900

  -updated the firmware (there was a new one that just came out a couple of days!)

  -filter disabled in the Security tab options

  -forwarded port according to the link in the ther first port

  How about you, you isolate the problem. Try front/open another port number and see if that will open uisng pfporterchecker. If it will also say 'Not open', try disabling UPNP and then check again through pfportercheckern.

• I can't open a port on the firewall of windows xp because...

  because windows vista has been on my computer before this operating system and vista firewall it always locks up and I can't open it up if xp. I need to open some ports for a game and on xp, it indicates the ports are open, but the game says always its blocked. so, how would open ports on xp. It is difficult to explain if you don't understand it all ready.

  Hi Guaze,

  You can follow this link & check if it helps.

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  Hope the helps of information.
  Please post back and we do know.

• How to reverse change how open .dll files?

  How to reverse change how open .dll files? I changed accidentally, trying to open only ONE file, most of them to open with Microsoft Picture It! software and now some things do not load, and my USB ports are completely useless!  Help. How to reverse this mess? OR should I simply delete all these and download replacements? A lot of new files that I downloaded automatically changes in Pic! icons, once that they finish downloading... - and I cannot restore, because he says that nothing has changed.

  Thank you!

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest running the fix that is present in the link mentioned below and check if the problem is resolved.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• WRT1900AC - together open the ports of the specified destination IP address range

  Is there a way to WRT1900AC to open a specified range of ports in the range of the specific destination ip address? I can see the options to open a port range to the local IP address on the LAN.

  You use a VoIP devcie or is this T-Mobile phones through the router?

  If you have a VoIP device as a microcell you can just put its IP address in the DMZ.

  You can try to set 0-65535 in triggering Serial Port and see how it works. I use this for Xbox games and reach the status of nat OPEN for games.

• I try to open my ports for games on CoD4

  I've seen XP how to open ports manually, but there is not a Vista one. Help, please!

  Hello

  If you have a router, you must open the port through the router first.

  Native Firewall for Vista here, http://windows.microsoft.com/en-US/windows-vista/Open-a-port-in-Windows-Firewall

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Opening of port 22 in PIX 501

  I would like to access my PC location xyz. How can I open port 22 access to my pc. I use pix 501.

  Can anyone provide commands to open the port so that I can access my pc.

  Thank you

  totally agree because only 3 commands are needed.

  list of allowed inbound tcp access any eq 22

  public static tcp (indoor, outdoor) interface 22 22 netmask 255.255.255.255 0 0

  clear xlate

  However, all of these commands are missing in the config you have posted.

• Impossible to open a port on Windows 7

  I have a mobile application that needs me to open the port 23424 on my system. I forward the port in my router and helped him. Then, I opened the port in the Windows Firewall. The app would not work. I put my system in DMZ, still no connection. I then unplugged the two firewalls, and again, I could not access the port.

  I checked on www.canyouseeme.org. and it reports "error: I could not see your service to the 76.xxx.xxx.xx on the port (23424) reason: Connection Refused" I then tried a new router, open port, the same thing. I can't understand what is blocking or refuses the connection. No matter what I do, something is obstacle in this regard.

  I have Time Warner cable and talked with them and we checked that their router is not active and acting as a bridge to my router. All other services are working properly, I can't just open this port.

  I use Windows 7 Home Premium, Microsoft Security Essentials antivirus software and a router Belkin N750.

  What Miss me? Thank you.

  You only need to run a firewall and not more than one firewall on your computer...

  PortQry message means that your problem probably is on the router, since you can connect with PortQry to this port from another PC on your LAN.

  I would check with the router manufacturers support site to help port forwarding...

• Opening a port in firewall manually

  How do I can't open port 80 on the traffic in and out like that?

  Thank you

  h

  1. esxcfg-firewall - o 80, tcp, out, web

  1. esxcfg-firewall - o 80, tcp, in, web

  2010-01-04 12:04:49 (20626) WARN: OpenPort: opening a port already open: 80.

  1. esxcfg-firewall - o 80, tcp, in, two

  2010-01-04 12:04:49 (20626) WARN: OpenPort: opening a port already open: 80.

  Can you give us the result of

  esxcfg-firewall - q

  Looks like its already open.