How remote access to VIRTUAL LABS

Similar Questions

• How remote access to computers?

  How to access another computer remotely?

  Hello

  Check out these links:

  http://Windows.Microsoft.com/en-us/Windows/search#q=remote&s=WOL

  How to enable Windows to make a remote desktop connection
  http://www.SevenForums.com/tutorials/3922-Remote-Desktop-connection-RDC-network.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• How to access my virtual machines to the internet

  Hi all

  IAM running VMW 6.05 I 10 vm running inside my host is xp professional and I don't want to make RDP for this host because who will sign him out because that simply allow 1 rdp connection

  I need to access my two Linux Vms from the internet but don't know how preinstalled Vmware network is configured in Bridge mode they get internt via dsl on the host pc connection and its dsl mode is configured for PPPOE mode

  Thank you for your kind suggestion and solutions

  Thank you for your support

  Ashu

  The instructions are router very specific, so your mileage may vary.

  On my linksys router, I connect to the management interface, go to the Applications and Gaming tab to configure your port forwarding.

  There are a few choice integrated but you can go on the empty area and create your own.

  There, type in ssh_vm1, select the external port (it is the port you will use to connect to internet) and then inside port (SSH, it is 22), then IP address internal and check active.

  Do the same for the ssh_vm2, and you should be good to go.

  Now, you will need to find your external IP address as well to connect to the Web address that was assigned by your ISP.  You can reach a site, like ipchecking.com, and your address is in the right hand corner.

  -KjB

• exsi how to remotely access safely

  Hello

  I'm building a lab at home consisting of a router and a server. The plan is to install exsi and a couple of windows on top of exsi servers.

  I need distance in the laboratory of the internet servers and also remote access to the exsi (to manage).

  How can I set this up, I was thinking about vpn for windows servers, but what about the noninale of exsi?

  Thank you

  You could RDP in a windows machine in your laboratory and then manage ESXi from there.

  Set up a VPN or open a port for RDP through your router.

• How to access files in a folder to store data for a virtual machine?

  Hi all

  I'm relatively new to virtualization in general (I'm learning!) and have a question.  I have a host server of VMware ESXi 5.0 set in place with several VMs configured in it.  I also have various data stores configured, usually a virtual computer by the data store.  Most of the virtual machines are Windows, but one I have problems with is a machine virtual 64-bit Red Hat Enterprise Linux (RHEL) 6.  I currently manage and administer the server remotely over a slow connection.  Anticipate, the last time I was on the same network as the host server, I downloaded to a folder on the same database as the VM RHEL, about 5 GB of files that I knew that I would need to access in the VM RHEL install different software.  Now, I'm trying to "expose" these files very to the RHEL VM so I can install the software.  How would I do that?

  From what I've gathered reading other posts here, I could create an ISO that contains the files and then upload that to the server on the host to be mounted into the CD player, but my connection is so slow that would take a very long time.  I also believe that I could create a network share on my Windows 7 computer and allow the virtual machine to access the files in this way - but once again, my connection is the problem (not to mention that I do not have a GUI installed on RHEL and I'm not a Linux expert).

  None of the files I need are ISOs, unfortunately, so I can not directly mount the CD-ROM drive in the virtual computer from the data store.  If I have access to a shell on the host server, it does not recognize the command vmware-mount so I can't access the virtual disk for RHEL to just copy the files into it.  Also, it does not recognize the mkisofs command (of which i google trying to figure out if I could create the ISO on the host itself).

  So, basically, I'm looking for a way to access files in a virtual machine that are in the same bank data, as its virtual disk.  If that is possible to copy these files in virtual drive somehow, or mount a CD-ROM drive or hard drive that exposes these files on the virtual computer, I don't have a preference...  I'm just trying to not have to re - download the files in a different format (or using a different method) since they are already on the host server.

  Any suggestions would be very appreciated that - thank you.

  Welcome to the community,

  one solution might be to enable SSH on the host computer and then use scp to access or download files from the host/datastore (within the Linux VM).

  André

• How to access the remote wifi router

  Hello

  I have a camera app on my phone where I can log in and check my home monitoring cameras. However, sometimes my homenetwork resets the ip address and if I'm not at home to check my new ip address, I don't know what is the new ip address to use and connect to check my cameras in the phone application.

  Sometimes, I travel and I try to check the cameras and connection failed because the IP at home has changed.

  I found this article, but I'm still waiting for e-mail by netgera! :

  http://KB.NETGEAR.com/app/answers/detail/A_ID/26109/~/how-to-remotely-access-your-router-using-netge...

  In addition, in the article, step 3:

  • Click the router settings , and then select remote access to connect as.

  HE IS No. TEL THING AS ACCESS to connect remotely.

  Is there another way?

  Help, please

  P.S. I have a router WNDR4300-N750.

  In the meantime what happens if Netgear is more professionally and send me the * beep * e mail for verification?

• How to access a shared file on my RN212 NAS remotely from another program?

  I've looked everywhere trying to find how to access a shared file on my RN212 NAS remotely from another program (kodi) on my iPhone 6 more remotely, away from home. I tried to FTP, UPnP, HTTP, etc. anything and it's driving me crazy! I run the program kodi from my phone for watching videos stored on my SIN, I have a router NightHawkR7000 and believe that I am fairly warned to get this figured out, but apparently not lol I have all the correct ports forwarded, but perhaps I'm missing a step somewhere. Any help on this would be much appreciated!

• How to configure remote access on my system?

  How do iget a friend or remote security access my cpu

  Hi Charles,

  First of all, I think that you want them to be able to use Remote Desktop (not really remote access which is a little different) to connect to your computer and then work on your remote on their own computer as if yours was in front of them (with some minor limitations).

  To allow your system receive the Remote Desktop connections (not all versions of Windows will - but most allow), see: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/cant-remote-desktop-from-vista-home-premium/f6d87400-58a2-423c-86f3-5650a4e0b153.  This thread shows you how to do it in XP and Vista.  It is roughly the same as Vista to W7.

  Then the person who wants to connect to you will need to send you a few items to be installed to work with the program they use for remote desktop.  It is typically logging in a web page and following the instructions you get on the phone (which they need to give you a code, usually) and then they can access.

  Be VERY careful who you give it.  They can do almost anything once they are in control of your system.  While you can usually talk to them and usually can see what they are doing, it is possible for them to make downloads fast and such that you really don't want on your computer.  You can cut them with a click, but it is unclear what they can do in the meantime (depending on how they do it and how do I know that you're what happens).  I let my ISP and Dell use desktop remotely with me, but no one else never and only after I called them (and not if they called me) to make sure that I have about the right people and not crooks.  If it's a friend, make sure it's a really good who knows what he or she is doing.  With remote desktop, they can help you solve problems or completely flexible you.  You have allowed their past almost all your security protection when they are connected, so it isn't going to save you.

  I hope this helps.

  Good luck!

  Kosh

• I am running windows 7 on my laptop and I want remote access to my office at the top of the page that is running windows vista how to

  Im trying to get my laptop for my desctop remote access how to

  http://www.howtogeek.com/HOWTO/Windows-Vista/turn-on-remote-desktop-in-Windows-Vista/

  The information above should help.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  Connect to another computer using Remote Desktop connection

  See you soon.

  Mick Murphy - Microsoft partner

• How can I assign the static fixed IP for remote access VPN users

  Hi team,

  I have a requirement to assign a fixed static IP users VPN remote access in ASA, please help how I can achice this

  Thanks in advance
  Mikael

  username user1 attributes

  VPN-framed-ip-address 10.200.115.78 255.255.0.0

• How to use ACS 5.2 to create a static ip address user for remote access VPN

  Hi all

  I have the problem. Please help me.

  Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

  I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

  1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

  Step 2select System Administration > Configuration > dictionaries > identity > internal users.

  Step 3click create.

  Static IP attribute by step 4Ajouter.

  5selectionnez users and identity of the stage stores > internal identity stores > users.

  6Click step create.

  Step 7Edit static IP attribute of the user.

  I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

  so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

  Wait for you answer, no question right or not, please answer, thank you.

  There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached

• How to prohibit remote access vpn client to use the local DNS server

  Hello

  I'm on ASA5505 remote access vpn configuration.

  Everything works fine so far, except when the client got connected, he always used the local DNS server provided by the ISP.  How can I force the customer to use the DNS server configured on ASA?

  Thank you.

  Kind regards

  The command "Activate dns split-tunnel-all" is supported only on SSL VPN and VPN IKEv2. Since you're using IKEv1, this command is not supported.

  Here's the order reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1533793

  You configure no split tunnel? If you are, then you need to configure "tunnelall" split tunnel policy, and that will force the dns resolution and everything else through the VPN tunnel.

• How to configure VPN remote access to use a specific Interface and the road

  I add a second external connection to an existing system on a 5510 ASA ASA V8.2 with 6.4 AMPS

  I added the new WAN using another interface (newwan).

  The intention is to bring more internet traffic on the new road/interface (newwan), but keep our existing VPN using the old interface (outside).

  I used the ASDM GUI to make changes and most of it works.

  That is to say. The default route goes via (newwan)

  Coming out of a VPN using a site to character the way previous (out) as they now have static routes to achieve this.

  The only problem is that remote incomming VPN access Anyconnect do not work.

  I put the default static route to use the new interface (newwan) and the default tunnel road be (outside), but that's the point is will not...

  I can either ping external IP address from an external location.

  It seems that the external interface doesn't send traffic to the - external interface (or at least that's where I think the problem lies). How can I force responses to remote VPN entering IPS unknown traffic to go back on the external interface?

  The only change I have to do to make it work again on the external interface is to make the default static route to use external interface. Calling all internet traffic to the (external connection) original

  Pointers appreciated.

  William

  William,

  As it is right now that you will not use the same interface you have road to terminate remote access unless you know their IP addresses by default.

  In one of the designs that I saw that we did something like that.

  (ISP cloud) - edge router - ASA.

  The edge router, you can make PAT within the interface for incoming traffic on port udp/500 and UDP/4500 (you may need to add exceptions to your L2L static) of the router. It's dirty, I would not say, it is recommended, but apparently it worked.

  On routers, this kind of situation is easily solved using VRF-lite with crypto.

  M.

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.