How to connect after installing?

Similar Questions

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• L830 satellite - Bluetooth cannot connect after installing Win 7

  I reinstall (Windows 7 Home Premium) on my laptop PSK84V-02400UAR Toshiba Satellite L830, and install all the drivers, but after you install all the drivers, I can't connect any Bluetooth device to this tour...

  When I search using the Bluetooth window it shows in the search window and after a while ' * could not detect the remote device * ' *... Kindly help... awaitng your valuable response.

  Can you please post exactly details how you installed the software and drivers Bluetooth?
  I think that you have made some mistakes there

  Your laptop supports the Atheros WLan card. Right?
  I think that this Atheros WLan card compatible with BT as well. This means that you need to install a special driver that allows to share WLan and BT in a single module.

  This driver calls filter for Atheros Bluetooth driver package.
  Therefore, install the driver Atheros Wlan, Atheros Bluetooth driver filter and battery Toshiba BT package.

  Then BT must be installed correctly and you should be able to activate it in order to start the pairing process.

• Cannot connect after install

  I just bought a new SSD with the intention of doing a fresh install of Windows on it. I downloaded Windows 8.1 installation directly from Microsoft Media on a USB key. I went through the installation, and it seemed to work perfectly well. However, when I started to install programs, I am essentially impossible to restart the computer. When I do, it attempts to load the login screen, but it is completely empty. I tried to reinstall Windows, and I am able to restart perfectly fine right after it loads everything first... but every time I try to install anything (Windows, Chrome, graphics drivers updates, printing software, etc.) he comes back to the same problem when I restart... screen empty, unable to do anything, much less actually connect. It is the first time that has happened for reinstalling Windows and I am quite lost.

  Hello

  Thanks for posting your query in Microsoft Community.

  I can understand the feeling of not being able to see the machine how it should work and I'll be happy to answer your query. Let me ask you;

  1. What is the brand and model of the computer?
  2. How did you create installation media for Windows 8 (which is the link/URL)?
  3. When you say new facility, do you mean clean install?
  4. Which operating system was installed before Windows 8?

  I suggest you to follow the steps below and check.

  Step 1: Please refer to the following and create the installation media for Windows 8.

  Create an installation media (DVD/USB) for Windows 8

  Note: You should have the product key for Windows 8 to create installation media.

  Step 2: Start to the recovery environment with installation of Windows 8 media

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) click Auto repair of Advanced Options screen.
  (g) following, choose the operating system by clicking on its button.
  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  Step 3: The restore of the system on the Advanced Options screen

  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state.

  You can follow the steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  (b), select the exact time and the type of keyboard.
  (c) click on repair your computer in the lower left corner.
  (d) select Troubleshooting to Choose an option screen.
  (e) click Advanced options in the form of resolution of the problems .
  (f) select System restore.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Satellite T130-11U, lost the Bluetooth connection after installing Mobile Broadb

  I recently bought a Satellite T130-11U and established a connection with my Nokia N82, using PC Suite.
  Then I installed my broadband Mobile (operator TMN) and lost the Bluetooth connection.

  There must be a way to overcome this 'conflict '.
  Anyone with the same problem?

  Thank you.

  Hello

  Perhaps this 3rd party application is not compatible and that is the reason why this happens
  But first, you should check if the Bluetooth is always enabled

  In addition, you should check if this issue happen after installation of the new BT stack

  Here you will find the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• How recover Vista after installing XP?

  I had Windows Vista in my notebook. I installed Windows XP after formatting c drive.
  Now, I want to go back to Windows Vista. I still have the folder HDDrecovery in my E drive and d ' training is «WinRE»

  How to install windows Vista from recovery of HARD drive folder in drive E?

  I don't create any disk recovery DVDs.

  Help, please

  It won't work any more.
  Start your laptop and press F8 to display the advanced startup options.
  Is the option repair my computer still available?

• How recover Vista after installing Linux Enterprise Desktop from Novell?

  Hello world!

  Please can someone help with this problem. How can I recover my windows which I lost due to the installation of Linux on my windows. I tried too much time go by restarting and pressing f8, but this recovery option does not lead me to go and get my windows to the State facoty. As far as I know, I think that the hard drive has been reformatted after installation and deleted as a result options of backup or restoration, and if this is the case how can I restore my Windows file system and recover my windows in the back.

  Thank you for your e-mail to be on [email protected]

  Concerning

  Year s

  Hello!

  I think for the moment that you are not able to restore your previous version of Windows or you created the before recovery disk?

  I put t know what phone you have but all Toshiba notebook, they will be delivered with Vista without a recovery disk, but you can create one yourself. After you start the laptop the first time, you get the following message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  But now it s late to create the recovery disk and use the disk recovery HARD works, you must run the factory settings. This means that you can install your own version of Windows and then you start the drive HARD Toshiba Recovery function.

  Sorry mate, but the only way I see at the moment is to order a new drive Toshiba Recovery directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  If you have the recovery disk, you can restore your Windows version or let's say the factory settings.

  Good bye

• Samba75 USB Modem GPRS/EDGE cannot connect after installing Vista SP1

  Hi all

  I have a laptop under Windows Vista Home Premium. I can't connect to the Internet using my right to Samba75 USB GPRS/EDGE modem, once I installed Vista Service Pack 1.

  Any idea on how to solve this problem? Because of some network security options has been added by SP1 of Vista who refused to connect me with my modem?

  Kind regards.

  Hi Ken,

  Thanks for the reply.

  I found that the services required to support the diap network are some corrupted how (in other words, when you enter Services, you can start/stop/restart the service. all options is disabled). I'm not looking for is the first cause, but I think so. FYI, I already turned off all firewalls including Windows Firewall.

  I will fix this by reinstalling a new copy of Vista. Tired of the trousbleshooting.

• Advice on how to proceed after installing the OS on Hp Pavilion 2010ax g6

  Hello

  I recently bought a HP Pavilion laptop 2010ax from flipkart.com g6.

  I installed win 7 ultimate laptop and was stuck there.

  I didn't know how to proceed further as ethernet, wireless, bluetooth, webcam, touchpad driver, graphics etc.

  If anyone could help, please, it is most appreciated.

  Thank you in advance.

  PS: I was intending to take the laptop to a showroom of HP, if the thing is not resolved in 2 days. Please advice

  You are the very welcome.

  No, you don't need to install all the drivers.

  Let me give you a hand on getting some basic installed drivers.

  One is not available in support of your laptop and driver page, but it is very important to install this one first. It's the chipset driver that installs a lot of drivers from the motherboard.

  First download is what you need. Install and restart the PC

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  The next device you want to install is the video (graphics card). Install and reboot.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103954-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  Next is the audio: installation and reboot.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103764-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  Wired network:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103913-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  Card reader:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103762-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  The touchpad driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-106935-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  Protection of the hard drive:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-105047-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  Software quick launch:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104698-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  The WebCam software:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-109796-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  DVD/BluRay software:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104362-1&CC=US&DLC=en&LC=en&os=4063&Product=5269648&sw_lang=

  Who should get the best of them

  I left deliberately driver wireless card and the software because as you can see, there could be one of a few different model cards installed in your laptop wireless.

  So, after getting all these drivers installed, go back to Device Manager and click on the device you see labeled network controller and using the info above, after the hardware for him ID so I know what model of wireless card you have in there.

• Internet connection after installing vista

  I changed the hard drive of my labtop. Then I installed a vista business on my labtop but it can not connect to the internet. I tried this way:

  Control Panel, network and internet, set up a connection or network, connect to the internet.

  But this message: 'Windows doesn't detect any network hardware. "

  Please let me know how this windows vista able to recognize my internet connection which I use through my rotor for other computers. It cannot detect my wireless also. I wasn't expecting such a problem with vista before starting the real work.

  Hello

  Using another computer / laptop go to the website of the manufacturer of your laptop > search for a driver and software download section > key in your laptop model munber > look for the Vista operating system to the correct address > find drivers for it > download and save to a Flash Drive > transfer and install them in this laptop.

  If the manufacturer of the laptop has no Vista driver available for this model of laptop, we can not help you.

  See you soon.

• interruption of the internet connection after installing vista sp2, only a local network

  Hello
  Since I installed vista sp2 last week, I have no internet connection. Just, my laptop connects to the local network. I had already tried to uninstall sp2, but this does not resolve the issue. A restore of the system has not been successful (do not know why, windows just said failure of system restore). I also deleted my antivirus program and my firewall...
  The internet works occasionally for a short time and when I start in safe mode.
  Because I live in a House that I have to use a fix ip, gateway and dns. After you install sp2, windows says my default gateway does not match my ip address and subnet mask when I change the properties of TCP/IPv4. Using another laptop with XP, the internet connection works with the same settings.
  I would be grateful for a quick solution, without formatting ;)

  I've highlighted the TCP/IPv6 line of course ;) the button was inactive when even
  in the registry, I saw WHAT TCP/IPv6 is already disabled

  my internet actually works, but I don't know why
  I deleted the file DisabledComponets for TCP/IPv6 in the registry, rebooted, create one, rebooted and it worked
  but I do not know why :)
  I hope that my internet is still functional

  Thank you for your support
  concerning

• Could not get an internet connection after installed antivirus software.

  I tried to install a software antivirus (Vipre) and it asks to restart the computer, and I did. When I restart the computer, the software could not continue for a reason, and I found that the computer could not get the connection with internet ("limited access"). While my other computers are still good connections with internet (wifi). Please tell us how to solve this problem. Thank you.

  Hello

  1. are you able to surf the internet?

  2. you use Internet Explorer browser to surf the internet? If so, which version?

  Let us try the following and see if they help.

  Method 1: See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Uninstall and reinstall wireless card driver and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: You can also try uninstalling the anti-virus Viper software and see if that helps.

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• No connectivity after installing Dell 1702 Driver for Wireless Adapter - of the suggestions?

  Hello world

  I'm completely confused on this one and at my wit's end.
  I have an Inspiron laptop M5110 and some difficulties to stay connected to my internet so this morning I decided that I would try to update the drivers. I uninstalled the Wireless and Blue Tooth drivers and reinstalled them, but now it will not even TRY to connect at all. In the lower right corner, there is a red x on the wireless bars and says No connections are available. Previously, it would have a circle of rotation while trying to connect, but that is more than all. My Ethernet connection works fine, I even uninstalled and reinstalled this driver (REALTEK) and his work with no problems. So to publish its specific wireless card...

  If I run IPCONFIG, the wireless card isn't even more appear. I tried to reset, deactivation, all I could think about. I tried several versions too many drivers, but nothing works.

  Right now, I removed it, so I have a yellow exclamation next to the network controller in my device settings. My hardware for the adapter ID is PCI\VEN_168C & DEV_002B & SUBSYS_02051028

  I think the info above, I believe that the Atheros wireless card belongs.

  Have any suggestions at all as to how I can get this thing to even try to connect to a network? I'm dead in the water... ANY idea would be so appreciated. I can stick captures screen or something else, if you think it would help.

  Thank you all,

  Tim

  Timmy1028,

  Zone Alarm because of the systems do not connect. Not very good if you want to continue your connection is allowed, or if you have a product key, for your subscription, temporarily uninstall Zone Alarm.

  The Dell Wireless 1702 802.11b/g/n connects to 2'4 GHz ONLY.

  Places to look to see if your connection is activated

  Also try reading, How to repair a connection

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Click Advanced. Look and see if this adapter has Antenna Diversity. If the adapter Antenna Diversity, change from automatic to the auxiliary voltage (can you also tell me if there or that it has no Antenna Diversity for my notes.) Thank you)

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• Internet does not connect after installing Kaspersky Pure 3.0

  I use 32 bit win8. I installed Kaspersky Pure 3.0. After that, I can't connect to the internet. Before the installation, I was able to connect. My widows firewall is turned off. I tried to make a break disable firewall and protection, but it did not help. What should I do?

  ART

  IF it broke when you instaled Kaspersky attachment to remove Kaspersky do not turn off.

• 5.1 ESXi does not connect after installing - R720 Dell

  I installed ESXi 5.1 update 1 on a Dell R720 server. The installation was made using ISO provided custom in the Dell site.

  After installation I can't connect or ping to the machine.

  After SSH-ing to the host via the console I could see that the host can ping to its own IP address, but not of its front door.

  Is this a problem with the network Dell drivers?

  Information: There are 4 network cards. All are Gigabit Ethernet of Broadcom Corporation NetXtreme BCM5720 cards.

  esxcfg-NICS - l gave me the output below:

  

  Please help me with this.

  Hello

  You should check the configuration of your network management. If the IP, subnet mask, gateway, DNS are correctly configured and if it it set to vmnic3, as it is the only NIC you connected.

  If everything is correct, I would check the physical switch of the server config is connected to. Maybe the port is blocked or a bad local VIRTUAL network is configured.

  Tim