How to connect TV again WT8-B-102
Hello
I have toshiba still wt8 b 102. I don't have a micro hdmi, micro usb only. How can I connect my tablet to tv (no wifi)?
Post edited by: kropek
According to the datasheet of Toshiba STILL WT8-A-102, the table supports the micro HDMI port output.
This port can be used to relate the table to TV s HDMI IN port.
Of course, this requires the use of micro HDMI to HDMI Cable
Tags: Toshiba
Similar Questions
-
WT8-B-102 - how to connect the external monitor
Hello
I have a toshiba WT8-B-102 Tablet and I need to connect an external monitor (vga or hdmi).
My tablet doesn't have an hdmi port.Any solution?
Best regards
FranciscoHello
WT8-B-102 does not therefore support other output micro HDMI port the connection to an external monitor or TV isn t possible.
But as far as I know the Tablet supports the wireless display technology (Miracast / Intel WiDi) and if the TV supports the same technology, you should be able to output the internal display on TV s screen too.
-
Yet WT8-A-102 - USB for pc connection
So I have Toshiba still WT8-A-102 and I want to connect it to my laptop via USB, I OTG cable micro usb to usb female, male-male usb cable, but still my laptop can not recognize me, so I need you to install drivers on my Tablet?
Friendly V
You n t need any additional driver
If you want to connect this table to the laptop, you should not use adapters.
The Tablet supports the micro-USB port.
Use a cable / USB micro USB to connect the Tablet -
Why my internet has stopped working
My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.http://support.Microsoft.com/kb/321448
In some cases, you must remove the cookie as well. -
How to connect benchmarks related crop (separated by razor) again?
Hello
How to connect benchmarks related crop (separated by razor) again? I know that FCP 7 - right click on the Cup and the menu with this action comes!
I mean here 'Cancel' or 'Restore' on the Protocol. I have only the "rolls" found to roll / push the Collet Cup!
Greetings from the Germany and a happy new year's Eve 2016!
Ralf
Because it was not included until CC first
-
My watch had problems bluetooth so I not matched iphone watch. How do I pair again look at the iphone.
Hello
To associate your watch once again, follow the instructions in the following support article.
Before you begin this process, you may first need to clear / reset your watch (that is, if your iPhone is currently believed that your watch is not matched, but your watch still believes, it is associated with):
-On your watch, go to the home screen (via a simple press on the digital Crown) > (cog icon) settings > general > reset > erase content and settings.
During set up, you can choose the option to restore from backup, which will restore most of the content and the settings on your watch.
More information:
-
WT8-B-102 does not start even after charging
I recently bought a Toshiba WT8-B-102, and I have some problems with it.
First of all, I couldn't install the update to the BIOS for a reason, but this isn't a huge problem for the work of the Tablet very well
but now I can't start it over. yesterday, I had the same problem, the tab left alone for a while (on the charger) and after that there no start/start. half an hour later, I tried again (after taking the charger) and then he started, but today it won't start at all. Even if I load for a few hours, then try again, try to start charging, etc. It's not good right?
I don't see that some led light or any other sign when I attach it to the charger. Any help or ideas guys?
Thank you
Probably the battery is totally discharged.
In this case, you need to charge the battery by connecting the power adapter for 30 minutes before turning the power onYet WT8 and Encore WT10 won't turn on after some time of no use
http://APS2.toshiba-tro.de/KB0/TSB4903N80001R01.htmIf this will not help, the device must be checked for possible hardware problems.
-
Yet WT8-A-102 stops suddenly and updated the BIOS
I bought a Toshiba still WT8-A-102 (not part no PDW09E-00100EEN) to the end of 2014. I upgraded from Windows 8 for Windows 10 Home Version 1511 without any problem in 2015.
I use it for a limited number of applications - Office365 and navigation, generally with Chrome and Hola VPN to access certain geographically limited websites, for example TV channels, watch movies and content recorded from my TV (these are generally. TSV format); I run the free version of Malwarebytes and AVG anti-virus.
I have two problems I can solve t.
1 stop abrupt
For a few months now, it always turns off suddenly, always exactly 30 minutes after the start. There is no warning, the screen goes black and that s it. You can immediately restart and continue as before, but the same thing will happen again after another 30 minutes. It happens that it s plugged in or on battery power.I can find no reason for this. For example:
- It didn't happen when I've upgraded to Windows 10 but a few months later.
- The battery does not turn down.
- The Tablet does not heat.
- It occurs regardless of whether you ve been using the Tablet constantly for 30 minutes or simply turn it on and let it idle.
- Sleep and stop times are set to one hour.
I ve looked at event viewer and the only things there are a few system errors showing which means nothing to me (a server is not registered within the required). Certainly, there is nothing that happens in the few minutes before it turns off suggesting a reason.
Any ideas please?
Update 2 BIOSI ve installed the different Toshiba updates available for this model. However, the update BIOS doesn t work. She is currently the version 1.60. I ve downloaded the version 1.80 for this model on the desktop. The zip file is bios-20150722112320. I extract it and it starts the process. The Tablet goes on to say it's reboot and then a panel will appear that says:
InsydeH20 Flash secure
Invalid firmware image!
Press any key to reset the systemIt s a Tablet! While they want me to? I ve you press buttons - Windows and volume - but nothing happens. If I just leave it, it turns off after 30 minutes and we re back with BIOS version 1.60 and I can work as usual.
Although this seems excessive, but suggestions please?
Thanks a lot for any advice,
JohnIt seems that your problem is similar to mine. I'm having the same random stop downs https://forum.toshiba.eu/showthread...-Error-Code-10 also I have an error code 10 in Device Manager. The agenda called "Intel Trusted execution engine Interface"... are you facing the same error?
I sent my tablet at the service of Toshiba, it has been over a month now and still waiting to be informed about the problem!
-
Re: Still WT8-A-102: broken glass - help with parts / repair
Hello world
I bought a Tablet Toshiba still WT8-A-102 a couple of weeks, and unfortunately, I cracked the protection glass, a fall on a concrete slab.
Anyway, long story short:
The LCD is intact, the touch function works (95% of the time, about 95% of the surface of the Tablet), only the protective glass is cracked, no splinters seconded, just a simple crack that runs through the entire length of the Tablet nice zig - zag.
~ 300 EUROS for sale at retail and service price, they asked for about 160 EUROS fix the thing (which I think this is outrageous).
So, I'm looking for using the following questions:
(1) I can't find a service manual. I need one to see if it is mandatory to replace the whole or just the glass screen / touch as well as for finding how to disassemble / mount the thingie.
(2) depending on the answer to the first question, I'm looking for spare parts (i.e. either a display or the touchscreen device, as I have a VERY good repairer, which ows me a favor, that is why the replacement would cost me nothing)
(I'm well aware I'm void the warranty, but given the service invoice by the official service of Toshiba, I find myself with choice of o).
Thanks in advance for your answers.
Sorry mate but I don t see any other solution for you to communicate with the Toshiba authorised service provider in your country to solve hardware problems or get parts of the compatible device.
Service manuals are not available for public use. As far as I know, that these manuals are available only for authorized service agents, engineers, etc.
Here you will find the responsible ASP in your country:
http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/ -
How to connect iTunes account Disney movies anywhere
This article: https://support.apple.com/en-us/HT202915 tell me how to connect my iTunes through Disney film anywhere settings account. Well, I do that and click on continue inside the settings to connect the accounts, and then it takes me to a page for downloaded itunes... It is, I already installed iTunes. I don't need to download again. If the connection of the two accounts process stops. Anyone know how to connect your Disney movie Anywhere settings to iTunes when you have already installed iTunes?
Found. The answer is... you must use Firefox. Chrome, IE and EDGE do not work.
-
How to connect satellite Pro L40-15 has to my TV?
Hello
I would use the laptop connected to my TV to watch movies. Can be connected using the TV as a monitor and what kind of cable would you use?
Thank you
MalcTo connect the laptop to the TV is very easy. If you look at the user s manuals document you will find exact explanation how proceed.
If I remember well your laptop should have S-Video output and video signal transfer port, you must use S-video cable. I hope your TV's S-Video IN port. If this isn't the case, you can use different cards.
Please check this thread and read carefully reading written by Miro. He explained very detailed how to connect the laptop to the TV.
If you have any other questions please post again.
-
How to connect a wireless printer to a wireless password?
I recently moved and have a new wireless router with security. How to connect a printer wireless router again?
I recently moved and have a new wireless router with security. How to connect a printer wireless router again?
You must read the instructions supplied with your printer, usually on the installation CD.
-
How to connect to the server pwercli RS?
Hello
I am trying to connect to the server of Powercli SRM but get error below.
PowerCLI D:\Scripts > Connect-SrmServer srmservername
Connect SrmServer: unable to connect to the remote server
On line: 1 char: 18
+ Connect SrmServer < < < < srmservername
+ CategoryInfo: NotSpecified: (:)) [connect-SrmServer], WebExcept)
ion
+ FullyQualifiedErrorId: System.Net.WebException, VMware.VimAutomation.ViC
ore.Cmdlets.Commands.Srm.ConnectSrmServer
PowerCLI D:\Scripts >
Could you please help me to know how to connect?
solved, it was the blocked 9007 port on the firewall. When I checked the above error again, I found that port 9007 is used.
Thanks for all the help
-
How to connect to iSCSI SAN without compromising security
Hello:
How to enable server OSes (VMS or physical host computers) to connect and LUN iSCSI mount without compromising the safety of our ESX host? We have a few Microsoft servers that need to use iSCSI initiators at Mount MON for MSCS. We cannot use the ESX initiators because VMware doesn't support iSCSI to virtual storage with MSCS. We have already read all the documentation and spoke with VMware support, so we know that our only option is to use the iSCSI initiators in Microsoft servers to connect to the LUN.
Our concern is security. If we let the servers use their iSCSI initiators to connect to the San, then they also won't have access to our service and the vkernels via the iSCSI network console? ESX requires that you have a port the service console and the port of vkernel on the iSCSI network for each ESX box that you want to use the ESX initiator for. We struggle to understand how to connect any machine (virtual or physical) to the iSCSI network to mount LUN without exposing our service and vkernels consoles. I know that the best practice is to remove this VMs network for this exact reason, but of course many organizations also have physical servers (UNIX, Windows) who need to access their iSCSI SAN. How people treat this? How much of a security problem is it? Is there a way to secure the service console and vkernel ports while allowing host ESX - no access to the SAN? I know that many of you are facing this exact in your organizations situation, please help. Obviously, it is not supposed that nobody uses their SAN iSCSI for anything else except for the ESX host. I thank very you much.
James
Hello
Check out this blog
Use of firewall is certainly a step in the right direction for that. If you can't have separate iSCSI networks, then you will need to isolate nodes NON-ESX/VCB iSCSI using other mechanisms. I would certainly opt for firewalls or reduce the redundancy to just 2 network-by-network cards and not 4 to a single network.
Someone at - it any other suggestions? Surely many ESX users share their iSCSI SAN with a lot of different systems and operating systems. Thanks again.
They do, but they do not secure their networks for their VMs ESX iSCSI / other physical systems. You have asked a very important question and it's how to connect to iSCSI SAN without compromising safety. If the options are currently:
Physically isolate
Isolate using firewall
Given that ESX speaks in clear text and does not support IPsec for iSCSI, you have very limited options that are available to you. The firewall you use and charge iSCSI, you send through it will determine if there is no latency. Yes its a cost extra, but if it is an independent network switches/ports/etc.
Best regards
Edward L. Haletky
VMware communities user moderator, VMware vExpert 2009
====
Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast -
How to connect to sqlplus on the cluster database
Hello
I have a task to export a database clusdb scheme, which is a cluster database.
cluster database name: clusdb
Instance name: > >-> > Hostname: > > ASM Instance:
Clusdb.global_clusdb01 > > srvpd_01.global > > + ASM1_srvpd_01.global
Clusdb.global_clusdb02 > > srvpd_02.global > > + ASM2_srvpd_02.global
When I try to run "sqlplus" to connect to the database on any of the host, it shows the command not found error.
# oracle@srvpd_01.global >: sqlplus
-bash: sqlplus: command not found
# oracle@srvpd_02.global >: sqlplus
-bash: sqlplus: command not found
How to connect to the cluster database?
Thank you!+
ORACLE_SID = CLUSDB
ORACLE_HOME=/Oracle/product/DB/11.1.0/Clusdb; Export ORACLE_HOME
ORACLE_SID = CLUSDB; export ORACLE_SID
ORACLE_TERM = xterm; export ORACLE_TERM
PATH = / usr/sbin: $PATH; export $PATH
PATH = $ORACLE_HOME/bin: $PATH:. ; export $PATH
LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib. export LD_LIBRARY_PATH
CLASSPATH = $ORACLE_HOME/JRE: $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib. Export CLASSPATH
+Add the lines above to your .profile or .bash_profile depending on the shell you are using.
logout and login again.Good luck.
Murali MohanChanged according to your variables. BTW, you can not SID more than 8 characters, which means that the name of your instance GLOBAL_CLUSDB01 is not your SID. So, try parameter with the name of the database as CLUSDB.
Published by: Murali Mohan on January 17, 2011 04:09
Maybe you are looking for
-
I'm building a Web site about ipage everything was working. I connect on continue and my page design would not be responsible. Ipage told me that they were able to load so I should make sure that the story has been authorized. When I clicked on the s
-
Before re-installing Firefox 19, I took by mistake backup my profile in a folder - C:\Documents and Settings\garan14\Local Settings\Application Data\Mozilla\Firefox\Profiles and not from C:\Documents and Settings\garan14\Application Data\Mozilla\Fire
-
cannot open links or download updates
When I receive an update as of the PDF, I can click on the download tab and nothing will happen.
-
Windows Explorer - library questions: remove groups
PROBLEM: --------------------- WHAT I WANT IT to LOOK: I don't know how it happened, but it's really annoying and I want to fix this ASAP. The problem is in my music folder, it shows the text in blue, and I don't want it looking like that. It has nev
-
Hello I'm reposting this thread, sorry for that. Is it possible to operate the access remote vpn for users at the metro ethernet, as users connect to headquarters using vpn for remote access via metro ethernet link. This metro ethernet link connects