How to generate a continuous ttl signal with a USB-6501

Similar Questions

• How windows Defender to continue to run with security essentials

  How windows Defender to continue to run with most of the security. When I installed the essentials Defender stopped running. I tried everything I know. missing in admin tools and all programs and it starts and stops. Oh, I'm on Dell Inspiron 545 Vista 64-bit Service Pak 2

  Hello

  Defender is NOT supposed to work with MSE, and there is no worlaround.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• How to connect my HP 2000 laptop with a usb/av cable to my TV?

  How to connect my HP 2000 laptop with a usb/av cable to my TV?

  Use an HDMI cable, if your laptop has this feature.  If this is not the case, use an RGB cable.  With the RGB cable, you will get video but no audio.

  Good luck.

• MCE only receive digital signals with Toshiba USB hybrid TV

  Hi, I have a problem with the USB hybrid TV, I want to use with Windows Media Center, it works fine, but I can see only digital Tv, no cable Tv. If I use the software provided with TV usb I can see digital cable and cable, but with Windows Media Center only digital television.

  Can someone help me please?

  Thank you!

  Luca

  Hello Luca

  Please don't be crazy about me, but you have to understand that maybe it's not possible to use the material in any desired combination. This product is designed for all the cell phones (not only for units with WMCE. Because of this manufacturer is it comes with own software.

  As you can see, it also works with WMCE and also digital. In my opinion it's the big thing. By the Way: AFAIK WMCE supports analog and digital TV by use of the antenna). Try Please also check some support WMCE or even forum WMCE site.

• How to generate two different analog signals in two different screws

  I use a card PCIe-6321 and a block of connection SCB-68. As it has two analog outputs, I use one of these outputs in a Vi to generate a square wave, and the other in an another VI to generate a sinusoidal output waveform. Each VI perfectly work separately, but if I run one then the other, the other sends no signal. Because I don't want to merge the two screws (it is more convenient to use them separately), how can I find out so that they work together (sometimes).

  Of course, independent maps with timing motors, controlled by the works of independent screws.

  Christian

• How to generate a high TTL and a weak pulse TTL using the USAB daq card

  Hi all

  I have usb daq 6361, how do I generate a TTL high and low pulse in labview to trigger my camera.

  Thank you

  Here is a code DAQmx to start your 6361, a digital output the value True (high TTL), wait a second, then set it to False (low TTL).  Have you tried to connect your device to your PC and pull them to the top of MAX?  He must "see" the device, and you can manipulate its ports to test.  Indeed, the name MAX gives your device is what you put into this first constant of e/s on my example (if you click the drop symbol, you should see a list of devices found as MAX).

  

  Bob Schor

• How to test bandwidth continuously on localhost with Flash Media Server?

  Hello
  
  I'm trying debbug my code (ActionScript 3) client that works with Flash Media Server 4 on localhost. Everything seems fine until this day.
  
  However, when I'm testing my player with other remote streaming servers, I notice the bugs because of the transmission of lower bandwidth between the server and the player.
  
  Is there a simple way to simulate lower bandwidth with FMS4 on localhost (with config, application.xml, programming...)?

  Thank you

  SEB Ethier

  Have you tried using Client.setBandwidthLimit () API available in SSAS? He can probably help you with what you want to do.

  Beside that, you can use NetLimiter or shunra utlitiy to choke BW like client-side.

  Hope that will help you.

• Generate N samples with NI USB 6501?

  Hi all

  I would use my 6501 NI USB DAQ (simple DAQ with 24 DIO) in order to generate a 16 - bit model. Using the DAQ assistant, I'm allowed to select "1 sample (on request)", 'Samples N' or 'samples continues. " But, unless I choose the first option, I get an error stating that I can choose only "1 sample (on request).

  What is a 6501 insurmountable limit?

  Thank you

  xdaf,

  Found this statement in the docs for 6501.  "All samples of the guidelines and updates lines are timed by the software.'".  I would say that it will only work in mode "1 sample on request.

• How old, a driver can be used with the USB-GPIB controller?

  Hello, I have a litter of Nicolet who I'm trying to control using an NI USB-GPIB controller and a Nicolet provided the program. The software were made in 1995 and told me it was made to work with the NI AT-gpib cards and I would need to use a pilot more OLD, BUT I don't have access to one of these cards for a purchased a USB-GPIB, hoping that it would work. A pilot more FORMER will support the GPIB-USB?

  Sorry for you, but not

  This is a really old software and works only on the driver to the gpib.

  Written in LabVIEW software would go from before this date.

• How to generate the report on rules

  How to generate the report on rules with id recipient and with a few keyoword in a rule.

  The rule management dashboard has an integrated 'report rules', you can configure properties and input parameters.

  For rule management dashboard, click homes > Administration > rules. In the upper right, next to the date and time, click reports.

  You can also find these helpful videos: http://edocs.quest.com/foglight/5610/Foglight_Reports_videos.php

  Hope this helps,

  Shay

• Update firmware for USB-6501 with 3.4.0 driver?

  Hello

  I am wanting to use the 3.4.0 NI DAQ driver with a USB-6501 and finds that the firmware is incompatible with the driver. The most recent driver that I used was the basic driver 2.1, unfortunately, the software that I use to send signals to the USB-6501 requires libraries to the 3.4.0 pilot.

  Y at - it a firmware available that is compatible with the 3.4.0 driver DAQ for USB-6501 device?

  I see that, after you have improved your DAQmx Base 2.1 to 3.4.0 drivers he said that the firmware on the USB-6501 is incompatible.

  If you go through this knowledge base, it will show you exactly how to get the firmware compatible with DAQmx Base 3.4.0. In particular, near the bottom, it shows how to perform this update.

• PWM with NOR-USB 94xx?

  Hello everyone,

  already, I asked once about the creation of PWM with hardware. And I was pleased with the response. But now I found 94xx Series-USB OR hardware. Here are the materials of high-voltage-Digital i/o. If any of you have already met with this one, would like to hear your conclusion about them. Would also appreciate if you could answer my question:
  Is it possible to create a PWM Signal with NOR-USB 94xx?

  Thank you

  Grigory

  Grekov wrote:

  I'd be more interested in the USB Module NI 9472 USB connection. Because it's the only one that would match my request.

  What is your application?

  Why don't choose you something in this list.

  If your condition is out to say 24 v PWM signal... you can also plan to use a custom circuit intermediate, not only to scale the output signal of the device (at 24 v) but also the reader following circuit.

• generate the TTL signal for synchronization from another device with Labview

  Hi all

  I use NEITHER-6071E and try to generate and send a TTL signal so I can synchronize another device with my Labview code. My code (code attached) generates a sine wave, and I want to send a singal TTL out at an angle of phase on the sine wave. Currently, the code sends a sinusoidal signal and a square using similar wave output on BNC Plug. I thought I could just use a square wave, and send it out as analog output for the other device, but apprantly that he works with a TTL signal.

  Could you please take a look at my code and advice me how to generate a TTL signal while being able to send it to some phase shift?

  Thank you davance

  Pooya

  There is almost everything using examples > find examples... menu

  but here is one which simply sends a single impulse:

  

  Note that I expect the line have been pre-defined in MAX (it's always a good idea to check that your DIO line behaves as expected by trying it in MAX).

• Generate a continuous output of square wave with E Series DAQ cards

  Hello

  I use a card DAQ-AT-MIO-16XE-50 and labview 6.1 to generate the frequency divider. The first thing I want to do is to enter a continuous digital signal into the program so I can divide it. The attachment is the program I use. It's pretty simple, just read the output signal and put them all in a while loop to get a continuous pulse. But when I want to observe the waveform on the oscilloscope, I got some square waves unregular.

  I'm a freshmen in labview. It will be appreciated for all her help!

  Hello

  If you are just getting started with digital i/o with traditional DAQ, I'd take a peek at some examples to see how to structure your code for both input and output.  There is one here (http://zone.ni.com/devzone/cda/epd/p/id/1113) which should give some features similar to what you are looking for, but if you want more examples, you can navigate to the examples as a result of the article here (http://digital.ni.com/public.nsf/allkb/46D0C7360A10D25F862571B5007B4411), as long as you have installed them with traditional DAQ.