How to Service Packs when there is no support?

Similar Questions

• Is it safe uninstall the old service packs when new ones are installed?

  I have Microsoft's latest Pack Service, can I uninstall old Service Packs when news are installed?

  I have Microsoft's latest Pack Service, can I uninstall old Service Packs when news are installed?

  Do you see even registered?
   
  In general - you should leave well enough alone when it comes to patches.  Microsoft does a job just to install only the parts of a patch which aren't already in place - so, even if you started without service pack, got SP1, SP2 and SP3 as well as 100 + post-SP3 fixes - this is not as if the use of space was exactly cumulative...  The overlap himself would have worked.

• How toupgrade service pack 2 and service pack 3?

  you will need to upgrade to service pack 3 for i tunes to work with my ipod. can't find how to do this. There is no set up be done on my computer.

  maxxtrot,
  You can go through this article.  It covers information on SP3 and has a link to download.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer HP laptop mdl. #ze5470us: computer hp laptop how fine service pack 2

  I had to use my restore disk to put everything to original factory setting. what I don't have under the stand, is that I don't

  no access to the series of service packs for win xp. When I tried to download the web browser firefox, it says I need service pack #2

  When I did the restore that was only service pack #1 service #2 I can't download the firefox browser, a promp tell me to have an abortion.

  I did a restore on my desktop pc. hp Media Center mdl. #m7260n. I couldn't go to the microsoft web site. for some reason any

  It promp me to download firefox. now, I can very good serf.  now, here's my problem. When I attempt to type

  stopped only.  I do this on my desk.  Now if you can help me with service pack 2 # How do I my

  laptop. hopeing you can help me.

  Thanks billyg patterson

  Hello:

  You can go directly to SP3 if you use XP SP1a.

  Download the file on another PC, copy it to a CD or USB flash drive and run it on your ze5470us.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  If SP3, you cannot install without SP2, then here is the link to download SP2.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Ignore references to network installation.  You can use this file to install on one PC running the exe.

• The message "requires the more recent than the installed version of OS service pack" when you try to install the CA's security program

  Original title: new pc and installation of my security program.

  The message "requires a more recent than the installed version of OS service pack" continues to show when I want to install my program files of security of this technology to my new computer. What should I do? Automatic update that happened but has not changed things.

  Are you sure the Antivirus you are using is compatible with Windows 7?

  What version is this?

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

• Problems with Service Packs - when you try to install Service Pack 2, it says I have to install SP1. When I try to install SP1, it says that I have already.

  My automatic update did not work, so I went to the site to try to download Service Pack 2, one seemed to have trouble with my computer. After I downloaded it, I tried to run, but he said I had to download Service Pack 1. So I did it. When I try to run this file, it says I have already installed Service Pack 1. So I tried to restart the Service Pack 2, but she is always claiming that I need Service Pack 1. I don't know what I'm supposed to do. Can anyone help? I'd be happy.

  Hi mistyrayns

  
  You can check if the below steps help-
  Step 1:
  I suggest you to check if you have information that service pack 1 is present on the computer. You can click Start and run. Then type msinfo32 and press ENTER. Check if Service pack 1 is present in the information provided.

  Step 2:

  If you have service pack 1 installed, and mentioned in the information from the computer, then I suggest you refer to the article below and uninstall service pack 1 computer.

  http://support.Microsoft.com/kb/948537

   

  Step 3:
  After successful uninstallation of SP1, try to install both service pack 1 and 2. Check if the issue is resolved.

  I hope this helps.

• How install a game when there is no disc drive?

  Original title: no disc tray

  How can I get my game on my laptop without a disc tray

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  Before troubleshooting, provide us with information.

  1. what operating system is installed?

  2. what game are you talking about?

  You can download the game directly into the laptop if you have an internet connection for the laptop.

  You can copy the files to install game on a usb flash drive and move the files to the laptop.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How to reduce noise when there is only black and white?

  Hi all

  Total noob here, I looked everywhere without success (or I did not know the exact term), but how do you do that?

  Basically, I'm trying to just extract lines and texts out of it, and the filtering and the exhibition did nothing for me.

  As you can see below, the 'gray' color was made by points that are completely black. Is it possible to do?

  So so so thanks in advance!

  

  You can try the filter > noise > antiparasitics, then move to curves and drag the end of the highest point of the scale, a tad to deliver pure a pure white background.

  

• How to install service pack 3 when my windows Update gives me this 0x8024400A error

  I have an old computer 2002 I needed to do a reinstall on and now I need to update the little girl, but when I try to use the program to update the window I get a 0x8024400A error. thoughts?

  http://taurarian.MVPs.org/WU_XP/0x80240036_0x8024400A.html

  0 x 80240036 and 0x8024400A

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• How can I load Vista Service Pack 2? I get the same error messages when I try to download it from the Microsoft support site

  I have a Dell computer with a 32-bit version Vista Ultimate factory loaded. Service Pack 1 is loaded.  I tried to load Vista Service Pack 2 several times by using the following procedure and it does not load.
  -From Microsoft technical support I click Download (using a cable modem) and click on the file to run.   The file MB 475 downloads in about 5 minutes.
  -Click on install Vista Service Pack 2 and it starts to install
  -After about 10 minutes, a message appears "installation was not successful 800F081F error Code.  A system error not install the service pack.  Please download and run the tool to "Check for System Update Readiness". »
  -J' I download system analysis tool and start the installation.
  -Get a message "Installation update for Windows (KB947821) update 1 of 1"
  -After a long time, a message appears saying that the Installation has failed with an error Code 800706BE.

  I repeated this process several times and always get the same result.
  My McAfee security software and spyware blocker is disabled during this process

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  See also the post of 'Response' in this discussion partners: http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/ad5159b6-edc7-4c45-842a-c8197aec3e07

  ========================

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the 490 error code when I try to install service pack 2 for windows vista. Anyone have any ideas on how to solve this problem? It is very common?

  Please help me with this problem.  I know that it is very important to keep your computer up to date.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I know for sure if I have Service Pack 3 for Windows XP is installed on my PC? I get conflicting info... Please help!

  I had some trouble with my desktop to the end. in any case, I went to check what programs are installed by going to the "Add/Remove Programs" option of the control panel.

  When I chose this option and scrolled down to Windows XP - Service Pack 3 - there is no information next to him and he said ' for support please go...» "(and it me linked to the Windows XP SP3 download center;) HOWEVER - when I check the properties of my computer by going to the menu 'Start', then go to 'My Computer', do a right click on it and looking at its properties - THEN it says "Windows XP Professional - Service Pack 3".
  So low line - I'm totally lost - how do I know if I really have SP3 for XP installed or not? and is there a danger for the download and the installation of SP3 for XP again? (or he stops the installation process and detect if I installed it already?)
  SOMEONE PLEASE HELP!

  Unless something happened during the installation, you should have SP3, if it shows it in the start menu, right-click on computer, properties, or that the other person said, start/run and type winver.  You can try to reinstall, and it won't hurt anything it either, although he can come and tell you already have installed and do not reach.

• Service packs how do I need?

  I have Windows XP and an old Dell tower which was given me already setup. I looked at the list of programs installed and how much Service packs you need? What I keep and what I remove? MSXML 6 (KB973686) MSXML 4.0 SP2 (KB973688) MSXML 4.0 SP2 (KB954430) then theres Microsoft.NET Framework 2.0 SP 2,3.0 SP 2,3.5 SP 1. As do I and what can I delete? It also has Microsoft Works 2001 installation Launcher.There are a lot of programs that I'm not sure. I'm no computer expert, that's why I'm here. Please feel free to stop me from ruining my PC. Thank you. jeannine420carol

  jeannine420carol,
  For Windows XP, you must have service pack 3.  If you click Start > right click on my computer > click on properties; that will tell you what service pack you are running.  The .net and MSXML are Windows components that use programs to run.  There are different versions of these components, and some of them have their own service packs.  Unless you know what that all programs you run need to work, then you should leave them in place.

  However, given that you have received a used PC I would say recharging the system to the factory settings.  Dell should have provided recovery disk to restore the system failing factory.  If there is no any drive, it is possible that there is a partition on the hard drive containing the recovery information.  You would need to check with Dell for your specific model on how to perform a factory restore.  If you do this, then you will be a "day one" configuration on the PC and should not have a bunch of components installed.  The factory restore now is just what I would do personally.

  Hope that helps.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get Service Packs, 2 or 3, for XP Pro, if automatic updates does not work?

  I have an Office I just bought 2nd hand for my son who is in grade school, but when I put the automatic updates to run that nothing comes however. Then I tried to install Norton Internet Security and I got an Error Message which said Norton was not able to complete the instalation like Service Pack 2 was not available, so I tried to locate a download of Service Packs 2 and 3 without success, can anyone help me please. As my son is a little off color on the PC does not.

  Say8tan.

  I agree with PA bear "you can't trust the security of ANY computer used until you've formatted the hard drive & then made a clean installation of Windows.  "

  But if you do not want or you cannot perform a clean install and are willing to take the risk of infecting other computers on the home network, read on:-

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• 0x8024400a error code appears, and when I try to download service pack 3, it won't let me.

  0x8024400a error code appears when I try to download updates and says I need service pack 3, and I can't download anyone. So, how = I download?

  Hello

  1. How are you trying to download? You use Windows update, or download the standalone pack?
  2. What is the full error message?
  Method 1:
  Check out the link and follow the steps.
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941
  Important This article contains information that shows you how to help lower security settings or how to turn off the security features on a computer. You can make these changes to work around a specific problem. Before you make these changes, we recommend that you evaluate the risks that are associated with the implementation of this workaround in your particular environment. If you implement this work around, take additional measures to protect the computer.
  Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.
  Method 2:
  Check out the link and follow the steps.
   
  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  OP can refer to the "Troubleshooting Windows XP SP3 installation" section in the article mentioned above for troubleshooting the installation of SP3 issues.

  How to get Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/322389