HP 14-ac101nx: difficulty to understand the consumer/home rights under the limited warranty HP users

Similar Questions

• NB305 - impossible to obtain the limited warranty

  I brought a NB305-106 a few weeks ago and I have a problem, try to get the limited warranty, TEMPRO, it just says that my number series/number are not valid, and on the web when you try to register, it says that the serial number has already been saved... so I can't even ask no other warranty. Someone at - it suggestions?

  Can you please send the link where you try to do this?

  To check registration status please visit http://www.toshiba-tro.de/unitdetails

  For problems, please contact Toshiba in your country. Details are at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp

• GoldenGirl, you said, "something outside of the limited warranty Sony does not require a charge"

  I showed you where I was covered by warranty that Sony extended for the number of optical block until 31/08/10-31/08/12...

  I also accepted the first offer from Sony 40 "Bravie.

  Now that the truth is out, why did you stop reponding to me?

  Joanne

  Mommyjosie,

  I often read this group discussion, but never felt obliged to join so far.  I watched you say the same thing again and again, providing dates and promises and show your total frustration with the way Sony has not handled your concerns.

  I also bought a KDF... He had the same problem with optical block, and my position of television has been replaced by Sony in 2012.

  I know that they have extended their warranty on this unit.  I can't believe how badly GOLDEN GIRL, (which I have lost all respect for) treats you.

  Of course, Sony officials are unaware their first offer, which accepted you it, and trying to force money out of you with a reduced supply.

  GoldenGirl, you treat, once good customer of Sony, who showed faith in Sony products and guarantees

  without the respect of a response because she corrected you.

  Personally, I would like to see mommyjosie finally get TV Sony Exchange program that she was promised 4 years ago... How much more if she must suffer for the purchase of a Sony (defective) and guarantee (Worthless)?

  It seems that you are enjoying his stress and making him go without justice!  What an abuse of power.  You are here to help the consumer to deal not with ignore - lie!

  I would like to see Justice here, so that there can be peace...   Fr. Tanner

• Whenever I want to open twitter "this connection is Untrusted"comes to the screen, but her option "I understand the risks" never comes. " What to do > help

  When I try to open the twitter/facebook etc, as sites the message that this connection is not approved appears on the screen. After some instructions another words in bold comes technical does not come from the details but "I understand the risks". What to do. Help step by step the pl

  Hi Linda, can you start at the top of this discussion and see if you can identify a particular program or a device that is intercepting your secure connections?

  If you want personal assistance, please start a new question and include your system information.

  https://support.Mozilla.org/questions/new/desktop/fix-problems

  Scroll down to the suggested items passed to continue entering in your question.

• How can I remove an exception made by clking "I understand the risk?

  Went on the website and received no reliable message and accidentally click on "I understand the risks". How to I reverse this trend? I don't trust this site.

  Hi robinandjon, you can cancel when you enter in the menu > options > advanced > Certificates > view certificates > servers tab and remove the certificate of the site in question.

• Untrusted connection is missing section "I understand the risks".

  Run Firefox 33.1.1 on Windows 7, try to access https://code.google.com. I get the page "this connection is untrusted", (specifically sec_error_unknown_issuer), but there is no section "I understand the risks" to allow me to add an exception. Other posts have suggested trying to 'forget this page', who has not solved the problem, or "Ce Frame: Open image in New Tab", which does not appear on right-click in this case. I also tried to go in 'View Page Info' but there was nothing out there for me to add the certificate either.

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

• Warning about bad connections contains no option "I understand the risks", I can't move on

  I install Thunderbird on Windows 8.1. I am trying to add 3 accounts. When adding the second account that Thunderbird has warned by transmitting unsecured password. I clicked on "I understand the risks". No problem. When I tried to add my third account, I received the warning again, but this time there was no other choice, "I understand the risks". I can't click on 'Done', if I change the parameter that TB can not find servers. I'm stuck and unable to add my last story.

  I installed on my laptop that runs Windows 7 TB and had no problems. I use the same settings as in my version of TB on my laptop. The version of TB is 24.4 on both machines. Of course, the version of TB was younger, when I installed on the laptop.

  Thank you, in advance, for any advice.

  Bill Halteman

  If I wanted to get the certificate warning when connecting to my email provider's e-mail server, I would like to seriously check the offered certificate. There should be no exceptions to this need in the first place.

  Certificates are there for a purpose, and is not simply to add an exception when it does not work.

• "I understand the risks" missing option - page is read from cache

  trying to access the Web site, I am facing a security warning because the certificate is self-signed.
  This is an internal site, which is currently the subject of tests - so it's ok to add an exception.
  the question is, the option to select "I understand the risks" is totally absent, the only available action is "get me out of here"

  Since it is an internal site under our control, I did a few tests more:
  It seems that firefox redirects the initial http request to https
  This does not happen on other browsers (chrome and IE), also tested in a clean install of firefox running without the extensions.

  even after completely cleaning the cache and temporary files, question remains.
  This site (over http) does not load on firefox, always redirected to https

  even after deleting the server mod_ssl apache and by eliminating completely any mention of the ssl on that server, connection with firefox always redirects http to https (now results in the error "Unable to connect to Server" - but still not to load the basic site http version)

  Amir.

  I forgot the screenshot of SQLite Manager.

• "This connection is Untrusted" without the option "I understand the risks?

  Dear Sir/Madam:

  I use Firefox (Version 10.0.2) in Mac OS X (Version 10.6.8).

  Now, when I try to log on to my Google account for Google groups, I continue to go to the page with the following message:

  "This connection is Untrusted".
  

  You asked Firefox to connect
  securely to the accounts.google.com, but we cannot confirm that your connection is secure.

           Normally, when you try to connect securely,
  

  sites will present a reliable identification to prove that you
  go to the right place. However, the identity of this site cannot be verified.

           What Should I Do?
  
             If you usually connect to
  

  This site without problems, this error could mean that a person is
  trying to impersonate the site and you should not continue.

           [Get me out of here!] Button        
  
           Technical Details
           accounts.google.com uses an invalid security certificate.
  

  The certificate will be more valid until 2011-07-20 20:00. The time now is 2011-03-02 12:20 AM.

  (Error code: sec_error_expired_certificate) »
  

  There are two problems here: 1) two times listed are all passed; 2.) I n ' have the option "I understand the risks".

  I have used Firefox for a long time and you have the problem just today.

  What can I do maybe?

  Thank you!

  Mauricio: I just solved the problem. For some unknown reason, my system time regained a year 2011, although the month and date are always accurate, and at first I missed somehow the wrong year. I just adjusted the year and now everything seems to be okay.

  Thank you!

• I do understand the benefit of "Options" tab utilities and want to remove it. How, please?

  I do understand the benefit of "Options" tab utilities and want to remove it. How, please? I tried this feature because the tab 'Fox' was no longer available with the 5.0 update.

  I loved tab 'Fox '. A click and go on a site added you to 'top sites' before. The update 5.0, this feature is no longer available. It was a disappointment. There is a similar feature "add on" that is, as tab 'Fox' compatible with 5.0. If yes I would like to know about it. Or better yet... make it usable with Firefox 5.0 ' Fox' tab if upgrades cancel features previously downloaded that work really... What's the point?

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• Difficult to understand the name of netbooks Toshiba

  It is difficult to understand the designation of toshiba netbooks for beginners is this prefix after etc. 500 550 nb-113 110 tell us about the battery? What is the best?

  Thank you and sorry for the bad English. What battery keeps arround 10 hours? Why NB305 (money) is more expensive than 500?

  Each Toshiba laptop inside has Toshiba label with basic information.
  It is written to the first name of the model: for example NB500-113
  Then you can see the number of pat s notebook: for this Satellite is PLL50E-xxxxxxx.

  Generally two numbers don t say much but for your info:
  The model name is depending on the country. For example, NB500-113 may be available only in Germany, but you won't find it in Spain. In Spain we NB500 - 22H. If the two laptops have the same reference number that designates two of them have identical hardware platform with identical inside hardware components.

  Toshiba NB500 offers three different numbers - PLL50E, PLL60E and PLL5ZE. With other words, you can buy NB500 with three different technical facilities. It is also possible that one of them will be offered in your country. It is defined by Toshiba s marketing strategy.

  What you need is good info on models available in your country. Please visit the support page of Toshiba for your country http://pc-support.toshiba-europe.com/ and option computers laptops & Netbooks.
  Compare all available models and look for info on equipment and the battery.

  I hope you now understand how it works. :)
  If you have any other questions you are welcome.

• Understand the status icons

  I am struggling with the basics of Skype status symbols and understand what they restrict others to see, and can I be assuming that others can't see, with a host of other variables worthy of consideration when communicating with this program.

  One of the reasons is for example, the automatic switch of status for online, if someone has so much that even shifted they are mice. If a contact calls me, that I'd rather not talk with at the moment, and I refuse to answer, is there something I can do without wanting it, allowing them to know as?
  Without understanding the details of each parameter, it helps to talk to seems to me

  akin to play chess without knowing what can do the Queen.

  Is there information available that focuses on the understanding of these powers?

  https://support.Skype.com/en/FAQ/FA3501/what-is-a-status-setting-and-how-do-i-change-it-in-Skype-for...

• Do not understand the point of layout mode...

  I'm afraid it will make me look like an idiot, but... I just don't, so well, I'm missing something.

  Here's my situation: I have two USB MIDI devices connected to my computer, an edrum with 8 pads and a keyboard 25 keys, touch 16 and a bunch of buttons. Both devices allow me to completely configure the MIDI channel, note, the key pads, etc. and so on.

  So, ok, in my APPLICATION I plug just those, create a track for each instrument, I want to play, say each track to listen to a particular channel for a particular instrument, and I'm all set. The keys on the keyboard go to the channel where the synth plugin is listening, keyboard on another channel where a sampler is listening, and keys edrum go to a third channel where Superior Drummer is listening, etc. My edrums me has even let press a button to change between "kits", altering what channel/notes sends each pad, so I can load up, say, multiple instances of Superior Drummer and switch between them on the fly. Large.

  MainStage has much latency better than my DAW, so I'm trying to switch, but after searching around here, and by reading the manual (where the "Connecting MIDI instruments" section is literally just a diagram showing how to connect a MIDI cable and nothing else), I still feel stuck. It seems that I have to start by loading a concert (either drums or keyboards, but not two and no option for a clean slate), then shove a virtual representation of one of my instruments has not been included in the concert I have loaded and then link each individual pad notes not only a unit, not just a channel, but a specific (ditto the high/low notes on the keyboard).

  Why am associating notes with pictures of the pads when the whole point is that the notes are generated by the real thing?

  Why can't just say 'send some signals come from channel 1 device edrum to this plugin', and so on?

  Why am I spent the time to mount images of a keyboard and 24 portions on my screen (surprisingly difficult) when all I care gets ratings generated by a physical device to sounds generated by a plugin?

  Why this strange intermediaries?

  I know that mainstage is very well regarded by people who know more about this kind of things I do, so what I'm missing here? If I use the wrong tool for what I want to do, any suggestions for what I should try instead?

  Hello

  usernamenumber wrote:

  Why am associating notes with pictures of the pads when the whole point is that the notes are generated by the real thing?

  Why can't just say 'send some signals come from channel 1 device edrum to this plugin', and so on?

  Why am I spent the time to mount images of a keyboard and 24 portions on my screen (surprisingly difficult) when all I care gets ratings generated by a physical device to sounds generated by a plugin?

  If I understand the situation, all you really need to do is get rid of any control layout, you don't want, create the MIDI activity 2 monitors (1 for the keyboard, the other the drumpads), assign entries noon then label 2 devices for clarity.

  In edit mode, just do as you describe: assign one controls the activity of MIDI to a particular slice.

  TDC

• I have a 4th generation iPad and the display is damaged. I bought in the States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  I have a 4th generation iPad and the display is damaged. I bought in the United States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  damage to the screen is not covered by the warranty - see if this offer your answer > https://www.apple.com/support/ipad/repair/screen-damage/

• understand the buffer behavior

  Hello

  I'm developing an application with c ++ which uses a voltage of anaolg entry. I develop with a simulated device usb-6210.

  on a slow computer, I get an error 200279 memory buffer for which I found lots of useful information already. I am trying to understand the behavior of the buffer by comparing a slow and a fast machine. Please see the following picture:

  

  I collect samples available in the buffer of each second with DAQmxGetReadAvailSampPerChan. the same exact version of my app works on both computers.

  my questions are:

  (a) how is it buffer behaving this way in the picture above? a 200279 never happens on the fast computer.

  (b) in the diagram below you can see the available samples accumulate while returning to zero every two seconds. Why is this, and can somehow avoid this?

  Thank you!

  Hi dan,.

  Thanks for you answer. Yes, I use continuous data acquisition and then I draw the data on the screen. I solved the crash on the slower computer by putting in place a ring buffer. I used to have a buffer that has been in constant growth, makes additional communal memory. the slower machine has less memory than the young, so I guess it is slowed down when less and less memory was freely available.

  I think the same thing would have happened on the fast computer, but it could take hours (4 times more memory), so I don't know about you.

  the tips in the above chart every 20 seconds remain a mystery but not so important.

  Welcome,

  mael15