HP 14-r202tx: lack USB Cobtroller in K8U42PA #AR6

Similar Questions

• Lack USB controller Windows Vista Edition Premium XP 2 420 family

  Windows Vista Home Premium XP 2 lack USB 3.O Host Controller, how can I get USB Controller

  By installing the drivers for your motherboard. Since you told us nothing about your computer or its recent history, which is as accurate as I can get.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows
  MS - MVP - Elephant Boy computers - don't panic!

• DeskJet 1010: Printer lacks USB cable out of box

  What says the subject; Miss me the printer USB cable right out of the box. I have found nowhere on this site to report such a question, so if someone could send me to where I had to go or be able to directly help me that would be much appreciated!

  For more details, I bought the printer at a local Walmart but have moved since then and am unable to go back there, so I am looking for HP itself.

  Hello

  No, no USB cable in the box, it is clear in the box. You buy you USB cable. He also says

  "USB cables are available from any reputable dealer." that means you have to buy yourself

  http://support.HP.com/us-en/document/c03742903

  Kind regards.

• Failed due to lack USB.inf

  HP F335 printer all in one worked on a laptop with Windows XP service pack 3. We tried to install the printer on another computer using Windows XP SP3 also but the installation failed after about 12% due to missing USB.inf file. LOCATER can not this file on the disk hard or on the original XP installation CD. Two Dell computers about 3 years.

  Bikeman49 wrote:

  HP F335 printer all in one worked on a laptop with Windows XP service pack 3. We tried to install the printer on another computer using Windows XP SP3 also but the installation failed after about 12% due to missing USB.inf file. LOCATER can not this file on the disk hard or on the original XP installation CD. Two Dell computers about 3 years.

  The fix turned out to be be #2 of http://support.hp.com/us-en/document/c00035977solution. Thanks to Mandy at HP total care

• MISSING DRIVER: INTEL (R) 82801DB / DBMSMBUSCONTROLLER24C3. LACK USB ROOT_HUB\4 & 7B8A9E7 & 1 CADDY

  MISSING IN THE XP PROFESSIONAL OPERATING SYSTEM DRIVERS.         FOR INTEL (R) 8280IDB/DBMSMBUSCONTROLLER24C3

  PNP - IDE\CDROMSONY_DVD_RW_DRU DEVICE ID. VERSION 3.21.65A

  INSTALLATION PROBLEM FOR SP3 - X 080070070 AND X 0643, OX80070005

  Please ADVISE: AT * address email is removed from the privacy *.

  Thank you

  Hi josephcolon,
   
  -You try to install the drivers for the mentioned chipset model?
   
  If so, download and install the chipset for the Intel chipset driver by visiting the following link:
  Drivers for Intel® 800 series chipsets
   
  Keep me updated on the status of the issue.

• Satellite M60: Problem with SD/MMC card reader

  I have a Satellite M60 Series. Has been pre-installed with Windows XP Home. I have upgraded to Windows XP Pro, SP 1.
  Installed all the drivers, but got an error when you try to install the Intel Chipset drivers, allways ask it lacks USB driver usbehc.sys. Another problem is that I can not read the SD/MMC card reader. In fact I reinstalled the Cardbus driver, but still I am not able to read any card about it.
  I appreciate really all advice on this subject.
  Kind regards.

  Hello

  Satellite M60 is newer units and I have no experience with it, but if you please check the download area of Toshiba and you will find instructions to facilities. You will see that cart drive is with cardbus driver.

  I don't know if it's important, but all drivers are designed for SP2 and if you use SP1, it is possible that there is a problem because of this.

  Good luck and please let me know if the installation could be successfully

• Satellite A200 - interfacing with Sky HD box, via the i.Link on my laptop.

  Satellite A200-1VP

  I'm trying to find away to check my laptop DVD, my disk drive hard SKY HD boxes, so I can copy the recorded programs from the HDD to DVD discs from the sky.

  But don't have a HDMI interface port, only the AVI & output VGA, which does not have a digital input, only the other signal output as we understand it.

  So I thought to using the port i.Link (IEEE 1394-a), as it was designed to send DVD date camcorder to the laptop to be registered? wouldn't the camcorder DVD send a digital signal, and if this is the case, shouldn't it work this way? Is there a device or cable on the market that I could use to make the possible interface to do this?

  I have watched cable, through the Internet but can't seem to find a HDMI / i.Link (IEEE 1394-a) lacking USB i.Link (IEEE 1394-a), but seem to be under the impression that the USB 2 is unable to deliver the date at a fast enough speed to make it work...

  Any ideas would help thanks.

  Why don't you talk with your local dealer and experts for this?
  If you do not have matching port on your laptop, you need another external solution.

  Check http://www.pinnaclesys.com/PublicSite/uk/Home/ and all products here.

• Lack of power on Portege M200 USB

  I found a few posts on this topic but nothing that gives a definitive explanation of how to solve the problem of the lack of adequate power to the USB ports on my M200.

  I have a burner DVD of LaCie which works perfectly satisfctorily on other computers when it is powered by USB, but does not on my M200.
  I also tried to use a simple box of HARD disk with a hot spare in there and it does not work either.

  I tried some of the suggestions from other threads like by unchecking the box "Allow the computer to turn off this device to save power" in the tab properties for the USB hub root in Device Manager. and I've updated the drivers available.

  What else to do?

  Hello

  What of the external USB hub with own power?
  My brother uses a USB external 300 GB HARD drive, and this feature works only if the external USB hub is connected between the HARD drive and laptop computer from other manufacturers.

  I think it could be a similar problem with your external burner.

• Backup on USB fails for lack of space; but it's a blank disk and there is no files on it!

  I have improved my NV + v1 (4.1.14) with 4 x 2 TB drives and I met the 4 k block size problem. So I'll try my backup device so that I can factory reset it.

  The current size of the volume is 1.3 to, so I took on one of the 2 TB drives to use as a backup via USB. 1.3 TB should fit easily in 2 TB, right?

  I added the 2 TB drive to the front USB port and formatted in ext3, it shows very well in stocks and a space free expected.

  So I made a backup and the source = task share / dest = USB/Sharename/and he ran.

  It works for a few minutes and stops with this error:

  Encountered error copying data from the source ==> /USB_HDD_4_1 path / / bla due to lack of disk space. [Job 003]

  I look at the USB and it is FULL. Zero byte available. He made a few records, but they are all empty.

  What is going on?

  Are there hidden files (.appledouble, etc.)? I ran BlueHarvest on the volume before the backup, and he deleted a bunch of them. But not 2 value of TB.

  I use this volume mainly with my Mac... am I missing?

  Any help is appreciated! Thank you

  OK, I got the multiple partition problem.

  When partitioning a disk with Mac disk utility, it creates a partition from FAT32 MASK called EFI which is used for Intel to start. The EFI partition is confusing RAIDiator and leading them to try to use the small EFI partition instead of the large main.

  Since I am not start this drive (it's only for backup), it is safe to remove it. You must enable a debug option to see the partition in disk utility. Google search for "EFI Partition delete on mac" to see how to do it.

  Also, I used EXTfs for mac by Paragon Software that allows you to create and mount ext3 on your mac partitions. http://www.Paragon-drivers.com/ExtFS-Mac/

  Backup operation runs now... If all goes well, it ends with success!

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• Impossible to install the new 4 G USB modem error lack driver bwbcmwin32installer_2.10.6.msi

  Original title: lack of pilot bwbcmwin32installer_2.10.6.msi

  Hello community!

  I encountered this problem: (I'm in Oz)

  all by installing the new modem USB 4 GB (above the required windows driver error message) wouldn't load the Device Manager software.

  I found later talk to telco support that the previous version of the software (3G network) must be uninstalled (not so advised in the documentation provided with the device)

  The next attempt to uninstall the old software has failed (what a surprise displayed the same error message as mentioned above)

  Tried to use the old device and now it don't work either.

  Y at - it a good soul out there that will help please (it's no surprise that telstra has been giving me the run around for 2 weeks now)

  Hi IVsWebBrowserUser,

  Welcome to Microsoft communities. The problem description, I understand that you are not able to install the new 4 GB USB modem. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         The question is limited to this device?

  Follow these methods.

  Method 1: Try to use the USB device to a different USB port and verify.

  Method 2: Try to use the USB device on another computer.

  Method 3: Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Let us know if you need more assistance.

  Thank you.

• Lack of Hardware ID Window7 64 cannot identify Samsung Mobile Composite USB design

  Lack of Hardware ID Window7 64 cannot identify Samsung Mobile Composite USB design

  Contact Samsung or your cellular provider for the software and/or drivers you need.

• lack of creating windows 7 install usb

  This boot camp does not at all.

  I have two menu options-

  1. install windows 7

  2 Download drivers

  After doing all this of course at the end of the download there is an error - "installation disc is not found."

  I tried to put the ISO on the USB with the downloaded drivers - that does not work.

  After 1, 2 above I went to the home screen, and I only get the error that is not found on the installation disk.

  In case of failure enormous amount of apples. It's a rotten apple.

  Also missing the option to create a boot Disc... uh, nobody uses most CD players.

  Your Mac has a built-in optical drive. Models by 2013 (2012 models are supported by the connection USB or DVD) requires a physical DVD. You can download a Microsoft - https://www.microsoft.com/en-us/software-download/windows7 - W7 ISO and burn it to a DVD.

  Allows to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 to install W7.

• Satellite R630-13 t - lack of recognition of USB

  Hello

  I have a portable Satellite R630-13 t. sometimes when I insert a USB key into the USB port, Windows 7 recognizes it, but he loses in a few seconds, as the discoveries it once again and loses it and all even more. When this happens, two USB ports produce the same error. I checked, the USB key was inserted firmly into the slot, so it shouldn't be a connection problem. Other times, the memories work perfectly. Any idea?

  Thanks in advance,
  valaki

  Hey,.

  > Sometimes the pendrives work perfectly
  It seems therefore that the USB ports are ok and the problem must be the USB itself. Have you tested the same as that on another computer?

• Can't boot from usb, lack of boot USB for dv7-4173us option?

  I couldn't find an option to boot from USB on my

  HP Pavilion dv7-4173us laptop BIOS.

  How to enable boot from the USB port?

  Thank you.

  Hey hpng,

  I am pleased to hear that the option is now available. When you set up a dual boot with Linux, I have very little information on how to do it. The only thing I would say, is to read the document "frequently asked Questions (FAQ) on Linux". It has a lot of frequently asked questions, but the main reason is, to the bottom of the page you will see an option to where I can find more information about Linux.

  Depending on what version of Linux you want to install, I suggest you post your question on the Linux community.

  I hope this helps!