HP 20 pavilion desktop: recommended driver alert

an alert to the recommended driver, diagnostics of material for the uefi hp pc (ver. 5.7.2.0 rev.a) could everyone I just tell me if it's for my office its a hp pavilion 20 all in one office, would be very grateful for help.

Dear customer,

Yes, the HP PC Hardware Diagnostics UEFI 5.7.2.0 Rev.A is available for HP Pavilion 20 all in a desktop model.

This HP PC Hardware Diagnostics UEFI provides hardware diagnostics UEFI based models supported that is used to validate whether a system is working properly. In addition, it supports to update and manage THE system BIOS and other firmware on the system.

You can install UEFI diagnoses from the link below:

http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-20-all-in-one-desktop-PC-series/5295901/model/5296765#Z7_3054ICK0KGTE30AQO5O3KA30R1

From the above link, click Diagnostics > click on the second link that says HP PC Hardware Diagnostics UEFI 5.7.2.0 Rev.A 15.9 MB 13 April 2015 > click Download and follow the instructions on the screen to install the same.

Hope this helps, for other queries in response to the post and feel free to join us again.

* Click on the star of CONGRATULATIONS on the left to say thank you *.

Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

Thank you

GR1

Although I am an employee of HP, I speak for myself and not for HP

Tags: HP Desktops

Similar Questions

  • Helps to remove the HP Pavilion Desktop Hard Drive

    So recently I bought your desktop HP Pavilion from Best Buy a few months ago. Thing was running great until this morning, when the hard drive has suddenly decided to go belly and FRY on me. I called HP Support and they are sending me a free HD to replace the bad, but I need to remove and return them. No problem, I think I'll open the chassis out. Little I didn't know...

    I really don't know who designed this thing inside, but to reach the screws to remove the hard drive is almost impossible for someone like me who has no specialized tools. I got two of the screws, but the front rear one I can barely see and even less to reach, and I don't know there's a fourth that I can't even imagine reaching. I hope someone can give me something special or a detail that I'm missing that will make this possible, if not, I am at a loss how to proceed.

    Here is the info on the machine:

    HP Pavilion Media Center

    Product: KT334AA-ABA

    Model: m8530f

    If it is necessary, I'll post a picture of her womb. If anyone has any info that can help me to disassemble this beast, I would be eternally grateful!

    -Justin

    Message edited by Justin_D on 02/15/2009 16:40

    You must insert the personal media at the front of the computer player. Remove the front panel, remove the screws which fix the cage of the front's personal media players and pull the Green tab by dragging the cage in the front. You will then be able to easily remove the drive.

    Do not hesitate to call HP, they will be happy to help you with the installation of the replacement drive.

  • HP Pavilion p7 - 1370t CTO Deskt: Routine Driver Alert update to the old version!

    I received an email saying [email protected]

    Alert about the currents of pilot - 7 March 2015 Intel Graphics Driver (ver 9.17.10.2867 Rev.A) products: HP Pavilion Desktop PC, computers to Office HP ENVY OS: Windows Description: this package provides the original for the solutions Intel HD Graphics driver in the supported models that are running a supported operating system.

    Note the number of version 9.17.10.2867 Rev.A.

    But Device Manager shows that the driver on my computer for Intel HD Graphics is 9.17.10.2932, with a date of 12/12/2012.

    9.17.10.2932 is not newer than the 9.17.10.2867?

    Am I expected to update to an older version?

    Stay with your new version.

    It is possible that the warning you received was a false reading or the updated driver in not in the HP system yet.  If you wish not to receive these alerts, you can unsubscribe to it.

  • Pavilion Office c 550-047: desktop HP Pavilion nine shows drive D as almost complete (2.43 GB free 19 GB)

    I just set up my new 550-047c Pavilion desktop that I bought at Costco. "My computer" shows that the recovery Image (drive D) has only 2.43 GB 19 GB free. I haven't used this computer much at all, is not a lot of navigation. This doesn't seem fair.

    Please explain.

    Hello:

    What you see is completely normal.

    Drive D:\ is the recovery partition, and it was only performed large enough at the factory to accommodate the recovery files needed to restore your PC to its State 'out of the box.

    Never store other files on that partition.

  • the HP Pavilion Desktop 500-329 GPU upgrade

    Hello! I was wondering if it is possible to upgrade the GPU and the power supply of my

    HP Pavilion Desktop PC 500-329

    The GPU is a GTX 960 and the PSU is a 500W EVGA power.

    I read that I had to turn on legacy something with the computer with the f10 boot menu. I made this and just want to know if it's possible.

    Yes, you can upgrade, simply follow the recommendations of the manufacturer of the graphics card on the connectors and the power of the power supply.

    You have a PCI Express x 16 (Gen 3.0) card slot there will be plenty of choice for video cards.

  • HP-Pavilion Desktop PC recovery error MediaCentre

    Hello, my friend tried to install windows 7 Home premium on his PC, and now I'm trying to get the PC back to factory setting.

    I have the following desktop PC

    HP-Pavilion Desktop PC MediaCentre

    M8095a RZ557AA-ABG

    AUD716065V

    Windows Vista SP1 x 86

    The recovery partition is available and I am able to get into recovery mode, only problem after hp recovers then windows restarts and is supposed to desktop installation, I get an error

    The system registry contains invalid paths, the Installation cannot continue. This system image was applied without gauranteeing that correspond to computers drive letter assignments.

    is there a way to solve this problem and recover back to factory settings.

    CAN SOMEONE PLEASE?

    Thank you

    I solved the problem, if someone has this problem all you have to do is the following.

    I used a live Linux OS and booted the PC,

    I then chose live OS and started the OS

    I then opened the partition manager and deleted the partition of 100 MB Windows 7 creates

    Then, I deleted the partition to the OS and created a new partition NTFS

    so now the partition table looked exactly as it did with the original Vista operating system

    Then I restarted my PC and went into recovery and restore the PC back to factory default mode.

    the pc is now as it was, and I have to remove some unwanted junk hp and upgrade program to windows 7

    the last time I tried to create the recovery disk that the PC would not recognize one of my DVDs, I hope that I don't have the same problem this time.

  • 0x8E5E0247 of error after installing a SSD Crucial of 512G on my HP Pavilion desktop computer

    I get this error even after installing a 512G SSD-Crucial in my HP Pavilion desktop computer.  I cloned it from my previous hard drive using Acronis 2014 edition.  I don't know that they are connected.  I called Crucial and asked if there were drivers more recent etc and the answer was not.  Any thoughts?

    Original title: error 0x8E5E0247

    Hey, Cliff,

    Thank you for visiting Microsoft Community.

    I understand that you get an error code with your SSD.

    Sorry to hear about the inconvenience caused. Do not worry, we are here to help.

    One of our community member had the same type of program where Glenn24 responded on 25 January 2011.
    Please refer to this and check if it helps:

    Additional information:

    If you have an Intel based, visit the Web site below and it will automatically scan your computer and give you updated information on the pilots.

    http://www.Intel.com/p/en_US/support/detect/

    Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • (Still fairly new) HP Pavilion Desktop PC beeps and there is no screen

    Last year I bought a 2nd Pavilion desktop computer - it came with 8 Win. I bought a second WD 1 TB HARD drive as a backup drive and installed in the machine under the Seagate HDD factory. Using my 1st PC ISO Pavilion purchased the previous year, I had OS (8 win so) and tried it migrate to the 2nd HARD drive backup white PC I installed. In this way, between two PCs, I would have 3 1 TB HDD with a Windows 8 operating system. However, when you install Windows on this backup disk, I lost screen 100% function as if it weren't even plugged in the Vid card and after re-booting, I get 6 beeps, no screen, but the PC seems to work all along. I can't of course in the bios with no operation screen to check what I have changed inadverdantly by introducing a copy of an OS on a 2nd drive. If anyone can help?

    old_geekster wrote:

    You have a real dilemma.  The fact that you don't have VGA is not a good thing, in this case.  I can hardly believe that you fried the PCIE slot.  I put most of my money on the BIOS.  However, more strange things happened.  I wish I could come up with a magic solution, but at this point, I am not sure of the result.

    One last thought.  When everything has failed, clear the CMOS.  I saw one step to solve many problems.  I don't have much hope in this case, however.

    Solved the mystery - everything under the Sun EXCEPT tried without clogging the cable of data to the HARD drive, then plug again WHILE the PC was still power up - got instantly on screen, and windows runs perfect - go figure, right?

    want to thank you for trying to help - we appreciate it!

    MD

  • HP Pavilion desktop computer - 550-166d: could not find a desktop computer HP Pavilion - 550-166d burner software

    I was unable to find the burning software for my new HP Pavilion Desktop PC - 550-166d. May I know that this model does not comes with the burner software? I try to find in the recovery software, but could not.

    So, I download software Cyberlink Power2Go:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob-140777-1#tab3

    "However a pop-up message: this software cannot be installed on a Hewlett-Packard system".

    No reason?

    Is there any burning software can be installed in my pc?

    Hello:

    I'm surprised that the software did not work.

    See if this version works...

    This package provides CyberLink Power2Go in the supported models running a supported operating system. CyberLink Power2Go is a burning software that allows users to burn data, music or video disks. It offers support for CD, DVD, HD DVD and Blu - ray discs and includes features for disk copy.

    FTP://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75302.exe

    If that doesn't work either, I like this free software... I install the version without open candy.

    https://www.CDBurnerXP.se/en/download

    The specifications of product software for your model, indicates that it does not come with any software CD/DVD burning.

    http://support.HP.com/us-en/product/HP-Pavilion-550-100-desktop-PC-series/8499648/model/9639726/document/c04915775/

  • Help me choose the HP Pavilion Desktop PC

    Hello!

    Please help me choose the HP Pavilion Desktop Pc which has 3 features-

    1 150 - 200W power consumption.

    2. easily extensible.

    3. must have Windows 7 Upgrade offer with it.

    I'm of the India, I chose only the PC models to choose among them.

    Kind regards

    ErSehmi

    HP Pavilion dv6516tx Intel Core 2 Duo T5250, 2 GB DDR2, 160 GB SATA, Nvidia GeForce 8400 GS, Segate wireless LAN, remote Media Center, Windows 7 Ultimate OEM, Authentec fingerprint reader.
    HP Pavilion m9430in Inter Core 2 Duo E7300, 4 GB DDR2, 1.5 TB Seagate SATA, Nvidia GeForce 9300 map THE, WLAN, TV Tuner, DVB - T integrated with remote control, wireless HP keyboard - mouse, 2309 m TFT LCD, Windows 7 Home Premium OEM.
    HP Pavilion p6040in Inter Core 2 Duo E7400, 3 GB DDR2, 500 GB Seagate SATA, THE Nvidia GeForce 7100, LAN, wireless keyboard - mouse, HP 2009f TFT LCD, Windows 7 Home Basic OEM.

    Already a customer of HP for the past 6 years. HP has impressive Technical Support (phone Support + Service Center Support) - India

    I have the following models-

    1 HP Pavilion Elite m9430in PC with HP Full HD 2309 m LCD TFT (Brilliant ++ purchase ever)

    2 HP Pavilion Notebook dv6500tx

    And the new that I bought last week is -.

    HP Pavilion p6040in with HP Full HD LCD TFT 2009f.

    A big thank you to everyone for their suggestions!

    Kind regards

    ErSehmi

  • Pavilion 15ab202tx: why I can not install hp pavilion 15 ab202tx driver for windows 7 64 bit

    why I can't install hp pavilion 15 ab202tx driver for windows 7 64 bit. For the most part not completed the pilot usb and network for

    LAN & Wlan.

    HP has posted only Windows 10 drivers for this model. @Paul_Tikkanen we can help to find the drivers for Windows 7?

  • Pavilion p6267c format drive again after replacement with WD 10ezex how do I do?

    Pavilion p6267c hard drive failed, replacing a terrabyte WD 10ezex.  I have to format it?  If so, how? I have the recovery disc for the victory. 7.

    No need to format, even if you did the recovery HP would erase any formatting.

  • HP Pavilion desktop computer - a 550-015: update map PSU and graphics

    I currently have the HP Pavilion Desktop 550 015 which has a 180w PSU and a GTX 745.

    I'm looking to upgrade to a power supply 450W and then later on the track upgrade the graphics card. I learned that some pre-built computers have a BIOS limitation, which may mean that it will not approve some GPU chipsets.

    Is this the case with my PC?

    Thank you for the additional information.

    I see no reason why this power supply does not work for you.  I love Corsair products.  However, if I were you, I would buy a 500W power supply at least.  It will give extra power to the use of maximum power and won't cost much more if necessary.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • P7-1534 HP pavilion desktop PC, stop and sleep problem

    P7-1534 HP pavilion desktop PC, Windows 8, 64 - bit, sometimes when I turned off my PC, the PC does will not off it stays on and I have to use the power button to turn off the PC and today I put the PC to sleep and he did not wake up when I tried to wake up that I had to use the reboot of the PC power button. I did a diagnosis of memory and found no errors.

    Hi dwellas

    I understand that you are having problems with the computer is shut down and not being able to wake up.

    You can have an application or process that runs in the background that not stop correctly. Close all applications on the status bar that you can, make sure you first close all programs, and then try again. If this works, you should see what you have installed which can be the cause of this.
  • speakers stopped working in HP Pavilion Desktop PC

    My speakers stopped working in my HP Pavilion Desktop PC. The computer says that they work, but there is no sound and the speakers are not muted. Can someone help me?

    Based on what you describe, you could try going into Device Manager and uninstall the audio drivers and then restart, but if this does not work, chances are that at work, there is a possible hardware problem. Which, given that it is a chip that is soldered to the motherboard, involving probably would involve having the unit in a repair center.

    Todd

    I am an employee of HP

Maybe you are looking for

  • Missing "Mass Storage Controller" M40 software

    I just bought a M40-149. When I start the laptop I get a message saying "found new hardware - mass storage controller. Loss of software 'I need to download a driver from somewhere? I tried to put in the recovery CD, but it is said that the required s

  • Equium L40-14i HD Enclosure

    I want to turn my Equium L40 - 14i HD in external HD. Should which kit pregnant I use?

  • Qosmio G10-133: Reinstall Qosmio recovery drive.

    I'm trying to reinstal XP MCE and Qosmio Player. I know that Toshiba has installed a new motherboard in my laptop which had an Intel 915 PM Chipset Update and a graphic design different controller nVidia Geforce GO 6600. They sent me two new drives Q

  • Need x 64 driver for a data card Huawei E368 AT & T

    No luck at the AT & T or Huawei (even to call them). I use Windows XP Pro 64-bit. I know that the card works because I used it on a different computer with the 32-bit version.

  • Enter the selected line only an editable af:table ADF

    HelloWe have an obligation to engage only the selected lines in a table. All lines in the table must be modifiable. There should be a 'Save' button in a column that has to save the selected line when you click it.Could you please share your comments/