HP 2000: Internet speed Test shows 80mbps but SUPER slow internet

I have less than 2 years, HP 2000 and the internet is so slow.  I did a system restore and the same problem.  I ran a few tests of speed on the machine and get 80mbps down and 11 upwards.  I ran several antivirus scans and nothing

You can try the following:

1 renew Ipconfig to get the new IP address

2 reset winsock

3 reset the firewall (option is available in the Norton firewall settings)

4 reset the browser

5. run a scan with our free Power Eraser tool to make sure that your computer is secure against threats:

http://www.Norton.com/NPE

Harry

Norton support

Tags: Notebooks

Similar Questions

  • WRT160N router wireless and speed Test

    Hello

    I was wondering if someone could help me.  I've just changed in the old Netgear G router to a router cisco Linksys N.  When I'm connected wireless sitting next to the modem and the router of my speed test shows more than 20 on the download, but when I go up a floor in the House it drops at least 2 on the download.  I thought that this router was supposed to expand the range and allow more devices to connect wireless taken less bandwidth.  Is there something I can do to improve the speed in addition to spending my router wireless on the main floor where is most of the navigation on the internet?

    Hahahaha WOW no no not the router to the modem worked!  I went from 1.5 on 15 on downloading downloading when I had about one foot apart from each other!  Awesome.  I have not been very high over the years!

  • He is an icon in the upper right corner on your internet connection speed test. is this malware

    He is an icon in the upper right corner on your internet connection speed test. is this malware

    You can attach a screenshot?

    Use a type of compressed as PNG or JPG image to save the screenshot.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • iPod 120 GB Classic is recognized by iTunes, but it will not be synchronized. I ran the diagnostic. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, it says that no device was found. It didn't Sync befo

    I have a version of the software running iPod Classic 2.0.4 of 160 GB. The iPod has not been synchronized for more than a month. I did diagnostic tests today. The connectivity of the device test showed the iPod, but when I ran the test of synchronizing device, he said that there was no iPod found. I checked and installed new updates, but it is not always sync. I restarted iTunes and computer, but it is not always sync. I ran a diagnostic on the device and it showed that it was operating normally.

    The iPod must be configured to synchronize automatically.  If this is not the case, click Sync does not synchronize no matter what.

    Select the iPod in iTunes, so that you see the iPod settings screen in the iTunes window.  Along the left side of the window, in the sidebar, under settings, click on music.  To the right, you will see a settings screen of the iPod music , where you tell iTunes how to sync songs to the iPod.

    NOTE: All the songs on the iPod that are NOT in your iTunes library (on the computer) will be lost.  If all the songs are in your iTunes library, no problem.

    At the top of the window, check the box to Sync music.  This enables automatic synchronization.  Below, select the option to synchronize library of ensemble music, if you want to 'all' in your music library to sync.  At the bottom, click on the apply button.

    From now on, when you make changes to your iTunes music library (like add new songs or update a playlist), iTunes automatically updated the iPod with the same changes when you connect (or click sync , if already connected).

  • My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any mention of this code error or failure anywhere

    My Alien Autopsy comprehensive system Tests show a ' Failed WVC07-LB8 ' video card failure, but I can't find any reference to this error code or failure anywhere, either in the "help", on Microsoft Support sites, or on the community boards.

    I have updated all drivers for this graphics card (AMD Radeon HD series 7900) and all the surrounding drivers with the AMD software.

    I can't find any information, so I don't know if I should get a new video card (which seems to work very well) or if I should just ignore it.

    Someone at - it ideas?

    Raven

    Computer Alienware Aurora R4
    Windows 7 x 64 OS
    AMD Radeon HD series 7900 graphics card

    Original title: Error Code WVC07-LB8

    Hello

    As you mentioned that you have already updated the AMD graphics card drivers, could you let us know if you see any exclaimation or any error in the device under graphics card Manager?

    Are you facing any problem with your graphics card, video, or your screen resolution?

    As Alien Autopsy Global System Tests showed you the error, I suggest you to get tap dell JDM for more support asiistance if you have any problem with Yon graphics/video card or screen resolution.

    For your information: once you uninstall your graphics card drivers, windows has its own built-in drivers that will automatically charge the generic drivers. If in case it does not load you can search the hardware changes, this will probably load the generic drivers.

  • Internet high speed test EA6500

    Hi guys,.

    Sorry for my English.

    I have a problem with the speed of my ADSL line (20Mega). Now, I have the following components:

    Dlink DSL-320 b (modem) + Cisco Linksys EA6500. If I start a speed test result its only 4 M for download, while I remove the router and I connect my Pc directly to the modem, the speed test results his 13-14M.

    Why? Is there an option in the router that I have to change?

    Help please.

    THX

    You have enabled media prioritization? It is probably the case. You can disable this feature. Better yet, the update of the firmware of your router. This should solve the problem. Visit the Page in Support of EA6500 to the latest firmware.

  • WRT 1200AC speed Test does not

    Test of speed inside the router no longer works.   Slow to respond and speeds from offshore.  I was wondering?

    My version of flash player is 19.0.0.245.  My router's firmware version is 1.0.4.167471.   V.2.2.0 speed in the router test.   Speed test by Ookla server based in Los Angles, CA.  Only runs IPv4.   All details provided in the inside of the router.

    Outdoor speed tests work.

    Someone else, a problem?

    Speed test works now.  Test speed to normal limits.  Any change to the router.  No change to anything.   I think it's an ISP issue now.   Highway 11/17 but disappeared from today when I checked last.

    But if you must know...

    ISP is TimeWarner cable.    Cable modem services.

    50Mbps down.   5 Mbps upward.
    Motorola / Arris SURFboard cable modem 600 series model SB6183
    Cat 6 Ethernet cable.   Excellent condition.   Not swapped, not necessary in this case.
    Never a problem of Internet connection, verified websites to normal speeds. I.e. www.speedtest.net & www.dslreports.com

    ISP MTU = 1500.   Standard with ISP.

    Your attention to detail is noted and understandable.    Thank you!   I really like my router but I like it with more features of the firmware update.

  • Site XFINITY Speed Test, no results.

    I'm going on the XFINITY Speed Test site and try to get my test results, but start the speed Test does not appear?  I used this site many times in the past.

    Could be a cookie problem.

    If you use Safari...

    Go to the Safari menu bar, click Safari > Preferences then select the Privacy tab, then click on: Marches site Data , and then click remove all.

    Then quit and relaunch Safari and try again > http://speedtest.xfinity.com/

    I just tried the test and it works fine for me on Safari 10.0.

    If the deletion of cookies did not help, make sure that Flash is up to date.

    Open system preferences > Flash Player, click the updates tab, and then click: check now

  • Beta by OOKLA speed test

    Since the update to the latest version of Safari, I was not able to access beta.speedtest.net by OOKLA (the no flash version).  I can access it using my Macintosh plus former 10.5.8 running, but does not on my iMac running 10.11.6 with Safari 10.

    All attempts to enter this URL returns the speedtest.net (flash version).

    Anyone know this problem?

    I tried to clear my memory cache of Safari and flushing the DNS cache, but still no joy.

    .. .a update.

    I was able to successfully run the other speed tests no flash with Safari 10 (e.g., Verizon and other speed test), but trying to access beta.speedtest.net, I'm automatically redirected to the flash-based OOKLA test.

  • Hi __My download speed is slow going as 5/kbps and when I'm in line to make a download speed test it says I should do around 5/Mbps! I don't understand why it's going so slow.

    If there is any advice you can give me would be much appreciated. Thank you!!!

    1. turn on the cable/dsl modem and router (if you have a router).

    a. disconnect the modem.
    b. unplug the router.
    c. wait 30 seconds.
    d. reconnect the modem - wait until all the lights came and how they should be.
    e. connect the router.

    Test now. If still slow, test with another computer if possible. If the other computer is too slow, call your Internet service provider. If the other computer is fast, but your computer is slow, you know that the problem is on your local computer.

    At this time start with the basics:

    2. the first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

    The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

    Make sure that the computer is clean:
    http://www.elephantboycomputers.com/page2.html#Removing_Malware
    MS - MVP - Elephant Boy computers - don't panic!

  • WRT1900AC speed test is empty

    This option is now simply display a blank page on my router.  No idea why or how to get the speed test?

    Thank you!

    I had this also on the first unit and only in FireFox. However, I wasn't able to get that and other problems if the unit has been returned and replaced which fortunately do not show the same behavior. Try using a different browser or reset the cache on the current

  • Ookla speed test, router, there is a problem with Flash Player

    I use Dell laptop, running Windows 7, IE11 browsers with Chrome. The router I have is a Linksys AE6900, with built in functionality of Ookla speed test,.

    who has recently stopped working. It comes to getting the error message:

    FireShot Screen Capture #008 - Linksys Smart Wi-Fi - linksyssmartwifi_com_ui_1_0_99_161129_dynamic_home_html (640x303).jpgSo, I'm not sure if it's a close routerelp, or a Flash Player problem. Anyone

    browser is used, both use the most recent version. Flash is automatically updated in Chrome, and the version of IE is 20.0.0.306. The thing that makes

    I wonder if maybe it's the latest version of Flash is, after this started, I had to do a restore of the system image of a six-month-old system. Before that I just could not

    update it worked until the Flash has been updated. Although the same test on both the site on the site from my ISP and Ookla continued to work throughout. I do not use

    Active X filters, but I block third party cookies. That shouldn't make a difference on my router because it uses a secure connection, and basically my own IP address.

    This is a wireless connection, but I'm also wireless when visiting other teams as well. Oh, I also tried to reinstall Flash and so the router software.

    I could try to install a version archived Flash, even though I'm bit of a stickler on security. Then, someone has suggestions of troubleshooting, which can

    help refine it? Or should I wait for when the next version comes out and see if it works then? Thanks to the one who fixed the time to read this long question.

    Looks like you have probably installed Flash, but the Web page is not detect Flash Player.  It doesn't really surprise me to IE11, but it is hardly surprising for Chrome.  My guess is that Chrome is blocking an approach using the router for security reasons guys.

    You use an adblocker or the plugin anti-tracking?  If so, you could try to disable them temporarily.  Something that blocks Flash or JavaScript arbitrarily may cause this.

    If you have not installed an update of the firmware on your router for a while, I would start there.  Linksys may have fixed on their end.  Otherwise, you might be out of luck.  The landscape of security requires that we (like browser vendors and the Flash) move to a more strict set security policies, web technologies, and which does not always leave room for backward compatibility.

    While we could spend time trying to identify the root causes of the problem, it is cooked to your router, so is the only way to fix is via a Linksys firmware update.  If it is not fixed in the latest firmware, it's probably easier to just give her to use http://www.speedtest.net/ directly... and if it works, you have a pretty decent confirmation that Flash behaves as expected.

  • Lenovo Y 410 - battery doesnot - shows 100%, but dies when disconnected

    Hello

    I have a Lenovo Y410 model, purchased in Nov 2007.It was my mobile favorite and best I've ever used.

    Only since the last morning, suddenly, the battery doesn't work.

    On power options the battery meter shows 100%, but when I unplug the power supply, the laptop dies instantly stops offshore.

    So, click Properties, it shows the battery details and said sound plugged in as well.

    I read some of the sons like resetting the battery indicator / voltage etc. control / battery replacement?

    Someone help me please...

    MARK_LENOVO has help everyone. If you're still here could you please help me.

    This problem happened to my other laptop (t41p) as well. So your help is very appreciated.

    Thank you much in advance.

    See you soon

    Dheeraj.

    battery flat, buy a new one.

  • I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page. But he does not accept printing orders

    I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page.  But he does not accept printing orders - printer offline.  Very frustrating!

    So, you have a problem with Picasa. You should contact them.

    I also quite what your note 'Wireless' has to do with the question. Maybe it's because you have yet to provide a lot of information...

  • My designjet 430 printer shows ready but does not print troble shoot shows like loan

    I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

    Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.

Maybe you are looking for

  • Qosmio F60 - install Windows 8 - missing DVD/CD player

    It is clear from my DVD or CD burner has flown the coop after loading Windows 8, coincidence?or defective Toshiba Qosmio F60? I can't reinstall it because the drivers missing. Where can I download a new drive for the cd dvdwho works with windows 8? H

  • What is the best way to keep the block diagram / cleaning of façade?

    Hello I'm relatively new to Labview so I'm not able to say if I'm overloading my programs or make my too crowded block diagram. I was wondering if there was some ways to tell if I can simplify my programming just by looking (perhaps only experience c

  • Problem with DVD Vista

    I got a new DVD, but it won't work. It is said Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to

  • How to remotely wake up Vista for file sharing?

    I need help to wake up my Vista PC mode standby for file sharing application. The PC is connected to a router and I can wake him from sleep mode by pressing a key on the keyboard. In addition, I can wake up the PC for the Logitech Media Server applic

  • I get a request to get an encoder activation code.  When I enter the code.  I see that the error transcodeerfout.

    I'm doing a DVD with POE.  I use Windows 10. When I do, I get a request to get an encoder activation code.  When I enter the code.  I see that the error transcodeerfout.  It ends there.  The program does nothing even if I wait several hours.  I resta