HP 350 G1: HP 350 G1 driver 32-bit win7 problem

Similar Questions

• HP Deskjet 9800:9800 Printer Deskjet Driver 64 bit Win10

  Need the latest driver 64 bits for a Deskjet 9800 of former HP printer. Have a 4360 Officejet which is not an option to preview before printing.

  I learned by a tech to get the 9800 driver and install. I did some time ago and it worked.

  I have a new pc now and you want to do this once more.

  I can't download the driver of the 9800, the HP download driver Panel is very confusing and I don't see a driver to download.

  On the old system if I knew where the 9800 drivers can I copy off on a USB stick and install them on the new win10 system?

  Help and thanks

  Sally

  I tried and haven't seen a 9800 driver listed. I made this sevearal times and the third time trying it appeared and I was able to install.

  Thank you!!
  Sally

• Hard drive Satellite Pro C650 problem

  Hi, a friend of mine's laptop in me to take a look because he wasn't starting. He was going straight to boot from the network map, so a little thought that it's a dead hard drive. Then, I checked the BIOS and as expected not detected HARD drive. Removed hard drive and reinstall, same problem. Then I tried another working SATA drive I've saved, not detected in the BIOS. I then tried the hard drive of my HP Elitebook 6930p for laptop, yet undetected work.

  Someone at - he fell on this issue before, it looks like a question of Council?

  Thank you

  Vincent

  Hi Vincent

  When you set the BIOS to default settings is the problem persists? Another SATA drive recognized, or not?

  It is not easy to say what the problem is, but maybe is the faulty disk controller.

• Should I install a printer driver 32-bit on a 64 operating system?

  I have a wireless HP Officejet 6700e printer.  It is used by 2 computers.  The operating systems on the computers are as follows:

  1 - HP Pavilion laptop computer using Windows 8.1, 64 bit.

  2 - HP computer Pavilion laptop with Windows 7 Pro 64 bit.

  I noticed there are TWO 32-bit and 64-bit of the printer drivers for Windows 7 and Windows 8 and 8.1.

  I have 2 questions:

  First of all, given that two computers use 64-bit operating systems, shouldn't I install the 64 bit print driver?

  Second, is there an advantage to install the printer driver 32-bit on a 64-bit operating system?

  Thank you, Terry

  Install the driver that corresponds to the operating system and type of bits (32-bit or 64-bit) that is installed on each PC.

  Second, is there an advantage to install the printer driver 32-bit on a 64-bit operating system? There are no advantage at all. It would actually be a bad practice, unless the printer driver is compatible with both types of bit.

• I encrypted my external hard drive with bit locker, now how to decrypt after reinstalling windows 7

  Original title: Bit Locker question!

  I encrypted my external hard drive with bit locker, I had just installed windows 7 ultimate, I found in a hurry I have does not support for 7 and decided to reformat and to return to my pro victory, I did and when I plugged my external in my cp asked if I wanted to format my external , that's when I realized in my haste I forgot to decipher my outside, so my Q should I do to decipher my external or I'm out of luck?

  Hello

  See the bottom of the articles that might help you.

  Learn more about BitLocker Drive encryption
  http://Windows.Microsoft.com/en-us/Windows7/learn-more-about-BitLocker-Drive-encryption
  Guide step by step for Windows 7 BitLocker Drive encryption
  http://TechNet.Microsoft.com/en-us/library/dd835565 (WS.10) .aspx

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I'm not able to determine which driver is causing the problem

  I get a blue screen everytime I reboot my laptop.  I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033).  I am not able to know which driver is causing this problem, please help.  Thank you

  In addition, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• driver software encountered a problem code is 31

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 31.__ (Problem code 0000001F)

  Signature of the problem

  Additional information about the problem

  Bucket ID: 562419118

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: pci\ven_1022 & dev_7455

  Configure the class GUID: {4d36e97d-e325-11ce-bfc1-08002be10318}

  PnP problem code: 0000001F

  Name of the driver: pci.sys

  Driver version: 6.0.6002.18005

  Driver date: 11/04/2009

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Hello

  Is the hardware ID - Tunnel of graphics from AMD - 8151 HyperTransport (MC) AGP3.0

  Check with AMD and also Support from the manufacturer of your system and downloads to update or reinstall
  currently the drivers.

  AMD - Contact
  http://www.AMD.com/us/aboutamd/contact-us/pages/contact-us.aspx

  Drivers & support AMD
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ====================================

  Given that this could be caused by a corrupt or drive or another file, you must also run these 1:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Need to format the drive due to some problems and having to reinstall Windows 7. I could use the same product key

  Original title: Windows 7

  I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.

  I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.

  Thank you

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• How can I get a driver 64 bits for the mouse?

  I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?

  Original title: mouse drivers

  The game, August 28, 2014 16:18:16 + 0000, WILLROSS wrote:

  I installed W7 to xp pro. W7 is a 64-bit operating system, xp is a 32-bit. My mouse (Logitech USB PS/2 optical mouse does not work.) When I check the drivers, they are 32-bit and when I install new drivers, they are also 32-bit. How can I get a driver 64 bits for the mouse?

  I don't know if there is a driver 64-bit Windows 7 to your
  mouse. It's Logitech to decide or not to produce a.
  Check on their website to see if it exists. If not, you
  are out of luck, but fortunately that a new mouse shouldn't be very
  Dear.

• As I unlock my external hard drive with Bit Locker Drive Encryption, I get an error.

  Hi, I'm unlock my external hard drive with Bit Locker Drive Encryption I get an error like "BitLocker Drive Encryption doesn't have to recover from a suddenly completed conversion. This can result from the newspaper of conversion being corrupt or the media is write-protected. "Please help me what should I do to unlock my drive."

  Hello Rodrigues,

  I suggest you to use the BitLocker Repair tool to get data from the encrypted hard drive.

  Follow the steps from the link below:

  How to use the BitLocker Repair tool to help recover data from a volume encrypted in Windows Vista or in Windows Server 2008

  You can download the BitLocker Repair on the link costs: BitLocker Repair tool

  Note: This article is also applicable to Windows 7.

• How can I download additional 32-bit win7 driver for a connected to a 64-bit win7 shared PSC 2210?

  I have a psc2210 connected to a 64-bit win7 Home premium system. It is shared and I need to connect a win7 32-bit system. When I try to connect from the 32-bit system, he sees the printer, but it fails on the driver installation. When I try to download the additional driver on the 64 bit system, she prays for a location. I have no idea tell where to look. Nothing to download from the HP site because they say that all the drivers are supplied with win7. I tried the Networking Wizard, but he fails to see the printer on the network side 32-bit.

  Try the following: on the 32-bit Windows 7 computer go to start devices and printers, add printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, wait a few minutes for the update to complete, and then select HP (Hewlett-Packard not) then the series PSC 2200.

• HP Pavilion dv4130us - requires the video controller driver to clear the problem of Device Manager

  Any help would be appreciated. Have owned the laptop since birth. Update memory & HDD for patches of bloatware to Uncle Bill. Naoual need a video driver to resolve the problem of video hardware acceleration. I tried HP detects online etc, no video is available, would use the XP version, but HP will not install it because it is an unsupported operating system?

  Hello:

  I'm not quite clear what operating system you are running.

  If you are using XP, you then this video driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=1093&swLang=8&mode=2&taskId=135&swItem=ob-52779-1

  If you're running Vista, then you need this one.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-47264-1

  If you are running windows 7, run the Vista driver above. It will error out (give an unsupported OS message, I believe).  Close the error window.

  Now, go into your device manager. Click on standard vga controller. Click on the driver tab, click on set to update driver. Select the browse my computer for the software method and navigate to C:\SWSetup\sp34749. Make sure that the include subfolders is selected, and the driver should install.

  Graphics card in your PC isn't completely Vista or W7 capable. You should now have hardware acceleration and be able to change your maximum permitted by your LCD screen resolution, but you won't have Aero.

  Paul

• Switchable Graphics driver does not [WIN7]

  Hello

  first of all, thank you in advance for all the help I can get.

  My profile: Lenovo T400 2765 TDG WIN7 32-bit

  Problem: I downloaded the switchable for WIN7 graphics driver after that I formatted my laptop completely. I started the progress of the installation and everything went very well. The driver previously installed the Intel graphics chip and then he continued with the ATI for ATI Radeon driver.

  When I right click on the desktop, I can choose to open the Catalyst Control Center, unfortunately it does not work on a click. And I can't find the function to change the graphics. This means that I am using the Intel graphics chip all the time.

  Before I installed WIN7 I had WIN VISTA and I could right-click on the energy bar and he gave me the ability to switch between graphics cards.

  Now, my question is, if I installed it incorrectly or if the driver does not work correctly.

  Everyone else encountered these problems with this driver?

  Please help me by sharing your opinion and I hope that we will get this fixed a problem.

  Thanks again for any help I can get.

  Sincerely yours.

  thyrox

  Edit: typos

  Edit2: My Device Manager does not display the ATI Radeon in the list.

  So and again once the prooves of the world to me, that the error is always the user.

  The problem is resolved.

  After I lie down the BIOS, switchable graphics was not enabled more. I activated, re-installed the driver, and that's it.

  Thanks for your help and apologies for the inconvenience.

  Sincerely yours.

  thyrox

  PS: This thread can be closed!

• HP Designjet 350 c driver

  I'm looking for a driver for a HP Designjet 350 c printer. Problems with the Vista compatibility.

  Hi grainhandler,

  You can download the driver for Designjet 350 c here: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=12642&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=28430

  I hope this helps.