HP 4500 Envy: "HP Envy 4500' prayer or do not feel

Similar Questions

• HP Officejet 4500 wireless printer does not appear on the control panel

  My HP Officejet 4500 wireless printer does not appear on the control panel.  How to fix it.  I have a laptop Toshiba and Windows 7 Home Premium OS.  Help, please.    rwillm

  Hey,.

  Thanks for the update, rwillm.  It seems that the installation of the printer can be a little messed up.  If the printer software is always installed, but simply lacks the printer, then I would advise to do a little cleaning before choosing to add the printer back.

  • Make sure that the printer is deleted from the file devices and printers
  • Click on one of the remaining printers folder
  • Select the properties of the print server at the top of the window
  • Click the tab drivers
  • Remove all drivers in this window for the Officejet 4500

  Also check in the Device Manager to verify that there is no mention of remaining of the 4500.

  • Click on the start menu
  • Right click on computer
  • Select manage in the list
  • Click Device Manager in the list of questions on the left side of the window that opens
  • Click the view at the top of the menu, and then select Show hidden devices
  • Remove all references to the 4500 in the list of devices

  After making sure of the device is gone, I recommend bike devices in the power circuit: router, computer and printer.

  * Make sure the printer has a valid IP address after switching back on and is connected to the same network as your PC before adding the printer.

  If the IP address and SSID are good for the printer, then try to add the printer with the printer software, you have installed.

  • Click on the Start Menu
  • Click on all programs
  • Open the HP folder
  • Open the folder for the series of the Officejet 4500 G510
  • Select Add a device option

  Let me know how it goes,

  Jason

• HP ENVY 4500: Print status but not printing

  Hello

  My printer worked properly, and all of a sudden, he cornered me. Whenever I ask an impression, I got the status of good message "printing" but nothing happens.

  I was cancellation of the printer and my computer, and then start printing again arrested, but always the same messages.

  I restarted printer and computer but not vain.

  Wireless indicator is turned on.

  What should I do?

  Thanks for your help

  Sorry to hear that these steps did not help!

  If you need to contact a support technician, you can find a few options here: LINK

• ENVY-a-4-Print-HP 4500 Series: password does not

  Today my husband bought a new desktop and where to hang had to get our help from local internet company. Whenever we put in the ID code and password it would stay does NOT FIX. Thus obtained on ATT and we were able to get a NEW PASSWORD. Now when I go to print something the printer wants me to PASSWORD. I did exactly cela and every time says INCORRECT WORD, PLEASE TRY AGAIN. But the funniest thing I ask (why is it every time I want to communicate with the printer I get kick out off line and lose the internet connection)?

  The printer was working great up to that time.

  Thank you

  Christine

  Hello and welcome to the HP support community!

  It seems that you use one of the two methods of Wi - Fi connection available on your printer called "Live wireless".

  He transforms your printer into a wifi hotspot and does not require a router or an existing wireless network.  It disconnect any device that you use to access the printer on the internet.

  I suggest that you turn it off and use your home network instead.  Search for "Live wireless" in your network settings on the printer and power it off.

  WyreNut

• Want 4500: Wireless Direct does not

  Hi all

  I am setting up my new HP envy with my MacBookPro on OS X 4500. First of all, I bought the printer because I can not connect to the printer and my laptop to the same wireless network.

  I installed all the drivers, but the printer prints only when my laptop and printer are attached to my phone, which is infeasible in the long term because of the cost. The printer is to distribute the signal wireless very well, but my mac cannot connect to it.

  I tried to reboot both several times.

  I would be grateful for any help

  Hi @RiverCam101

  What happens when you try to connect your Mac to the network Direct printers wireless?  While I wait for you, if it please go to the front of the printer, press the arrow down and select the settings menu. In the settings menu, go to and select without wire, then search for and select Advanced settings. Now in advanced settings you can go to choose IPv6, please disable IPv6 and restart the Mac connection.

  Please let me know if this change fixes the problem, or if you need assistance. If you need additional assistance, please do not forget to let me know what happens when you try to connect the Mac on the network. Thank you.

• 4500 WANT installation software not available

  When you try to install the software for my new HP ENVY 4500 printer I get a messge saying contact software currently unavailable from the manufacturer

  I solved this problem by UNINSTALLING all printers and then re - download the software. Now it works!

• HP Envy 17 j015eo: fingerprint reader not working after update

  So after I updateded Windows 10 in the last update, my fingerprint no longer works. I tried to download the original driver, it won't work. When I slide my finger over it just keep blinking but if I hold a finger on the flashing stops. But when I try to save a finger in Windows Hello or HP Simplepass, it does not recognize slide me my finger over it.

  @Nicolaj123dk

  System:

  HP ENVY 17-j015eo notebook PC

  Eagle Driver validity sensor:

  File name: sp63418.exe

  (26.2 MB)

  Program HP SimplePass current (up-to-date):

  sp76923 HP SimplePass V8.01.62has 32/64 bit W7 - W10

  Nicolaj123dk wrote:
  

  So after I updateded Windows 10 in the last update, my fingerprint no longer works. I tried to download the original driver, it won't work. When I slide my finger over it just keep blinking but if I hold a finger on the flashing stops. But when I try to save a finger in Windows Hello or HP Simplepass, it does not recognize slide me my finger over it.

  Comment

  • The Eagle sensor recommended is actually suitable for Windows 8.1 (and 8); the driver works in Windows 10.
  • The program supported the series 8 HP SimplePass is evaluated from Windows 7 to Windows 10.

  

  IF you were using previously series 6 HP SimplePass (any version of HP SimplePass 6.x):

  • It is time to move as a result of program series 8 HP SimplePass supported.
  • Even if you have an export of your webcards (Web sites / passwords) of this older version of SimplePass, you can use file .tsd (import) series 6 in series 8 HP SimplePass.  The two sets of program are NOT compatible.  There is no program of conversion of encryption between the two programs.
  • When you switch to the supported HP SimplePass version, you must create a new database of your Web sites / passwords.   This means you must create all new connections to fingerprints.
  • The new export file "webcard" is called the vault to series 8 HP SimplePass program.  The suffix of the file is ".opi".  The export process is similar to the old SimplePass program; you export your vault entries from within the SimplePass program to the file .opi.  The file is encrypted - keep - the in a safe place.

  

  Help, suggestions and examples:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Before performing any advice given here (or unfortunately), verify that you can connect to your computer using your password.

  

  Optional:

  Create a style admin with a password for the local account that you can use to connect to your computer if the need arise (everything happens on the side).

  See the Section:

  • Shelter account -Solutions for access, account administrative secondary

  

  In the document...

  Procedure - updated / (install HP SimplePass Re)

  Start by creating a Restore Point

  See Section

  1. Create Restore Point

  

  If you have installed any version 6 HP SimplePass

  • Uninstall the program from HP SimplePass version 6.x of programs and features >
  • Restart the computer and log in

  

  If the installed validity sensor driver is courses (as recommended):

  1. Uninstall your driver Validity Sensor in the Device Manager (do not remove) >
  2. Restart the computer to enable the driver to reinstall

  See Section

  1. Reinstall the existing fingerprint driver
     • Option 3 is to install the driver in Device Manager
       • Method 1: Reinstall the existing driver

  --------------   OR ----------------

  If the installed validity sensor driver is exceeded (old):

  1. Download driver validity Eagle
  2. Uninstall the existing driver from the Device Manager AND check the box to delete the driver >
  3. Close all programs >
  4. Shut down the computer > seconds >
  5. Start the computer and log on >
  6. Install the downloaded driver

  See Section

  1. Reinstall the fingerprint driver
     • Option 3D remove the driver from the Device Manager and install

  

  Then, check / adjust the settings to logon Windows 10 (fingerprints).

  See Section

  • Order of events is important
    • Logon Windows 10- Connection options

  

  If you have not already done after the Windows logon is (still) works, it's time to install HP SimplePass.

  See Section

  1. (Re) Install HP SimplePass software
     • Install the software Series 8 HP SimplePass

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• HP Envy 5540: Photo paper will not be printed

  Just got this HP Envy 5540, and when I try to print a photo of 6 x 4 from the drawer special 6 x 4 photo, it shows just a printing 6 x 4 on the main under tray A4 size paper.

  What is the point of this special photo print bed if she does not?

  I tried to change the default paper size in the "set preferences" section in the HP Envy 5540 software but it makes no difference, it still shows from the main A4 size paper tray.

  Hello!
  Welcome to the HP community @pboo,

  I noticed your post about the problem you are having with photo printing 4 x 6 inch photo paper, to your craving 5540, and I wanted to stop sharing my own suggestions.

  1. run the print and scan the doctor for Windows in order to solve printer problems

  2. Uninstall and reinstall the printer if the first stage did not help. Run it set printer to install the Printer Wizard.

  3. try to print from different programs.

  Also here is a guide to help the printing: Printing Photos

  If you have trouble, let me know and I'll do my best to help.

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Best wishes

• HP ENVY 15 t-k000 CTO Notebook: HP Envy My network adapter does not support gigabit speeds. Is there an upgrade available?

  My HP Envy 15 t-k000 works very well, but it is slow. I thought it was my internet until I did some troubleshooting and discovered that I don't get the super fast speed that I'm supposed to receive this is because my computer does not have a fast enough network adapter. He's currently the Qualcomm Atheros AR9485 it came with. I watched the maintenance manual and could not find an upgrade. Is there a module I can replace with allowing for speeds 1 G?

  The part number for the laptop is G0T55AV.

  Thank you!

  Hello:

  The adapter you mentioned... Qualcomm Atheros AR9485 is the wireless network card, and I do not think that this card connects everything faster than 72 Mbps.

  Your laptop comes with the card Realtek 10/100 ethernet (wired) and it cannot be upgraded because the ethernet chip is part of the motheboard.

  If you want a gigabit ethernet connection, so I advise you to buy an external USB to RJ-45 gigabit ethernet adapter.

  You won't find any wireless card that will go beyond the rate of 867 Mbps AC, and you would need a router ca to achieve these speeds.

  You would also dismantle the entire notebook to replace the wireless card and if your laptop has a single antenna attached to the atheros wireless network card, you will not be able to upgrade to the fastest wireless card.

  A proper AC map would be the Intel 7260 wireless card if your mobile phone has two antennas attached to the atheros card.

  http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html

• HP Envy 4501: Ink cartridge does not

  My HP envy 4501 claim that the new real black HP61xl ink for older generations. Its identical to the empty cartridge, I deleted. But I can't get the printer to accept

  HP has changed the design of cartridges HP 61xl some time ago.  The new version works in older printers but new printers (for example, envy 4501) will no longer accept new versions of the cartridge. Here it describes this change.  If contacting HP does not solve the problem to your satisfaction please post here.

• HP ENVY 700-049 will be not updated to Windows 8.1 - 0xC1900101 - 0 x 20018

  I recently bought a HP Envy, office 700-049 and have updated to the most recent Windows 8.  I re-downloaded and installed all the drivers for Windows 8 listed on the support page.  I disabled the LAN wireless in Windows (no way to do it in the BIOS I can say).  After that, I went to the App Store Windows and ran the 8.1 update.  The machine restarts and begins to set up the devices, but stops before the end with the SYSTEM_THREAD EXCEPTION NOT_HANDLED error.

  On reboot I give myself

  0xC1900101 - 0 x 30018

  It appears in Google... and I tried common recommendations (install updates, install the latest driver, disable WLAN)... y at - it additional suggestions or I'll just have to hang tight on MS to fix this?

  My wrist is tired of bouncing over the shortcut bar. :-)

  Kind regards

  -Tony

  Obviously, make sure you have the latest drivers and updates installed... but I managed to get through there.

  I'm pretty sure that the Ralink Wireless card is the culprit.

  In addition to the steps I have described here above I have disabled the integrated graphics card.  Also, I was going through a KVM.  I hooked the mouse, keyboard and monitor directly in... using the graphic adapter PCIx.   But I suspect that the following was "the miracle."

  I had a set of screwdrivers on a small scale and a pair of pliers and took the Ralink wireless out.  It's just "above" where is the PCIx graphic card.  This screw was really in there... Please be very careful not not to strip out.  Once the screw is out, it appears out of the slot.  I just hid it near bays of drive.

  With the offline wireless the 8.1 update succeeded.

  -Tony

• OfficeJet 4500 G510n: I can not install my printer portable officejet 4500 G510n after updating windows 10

  Help please.  I tried for days install my portable printer officejet 4500 G510n to my PC G wireless that runs 10 recent Windows updates.  I tried everything, including the uninstall/reinstall but it is never successful and I understand the different problems every time.  I even tried setting up by USB... always without success.  I don't understand what is the promlem.  AND when I use one of the programs that install fails, it installs a solution for me for windows 8, which does not, of course, because I have 10. I really wish I had a printer again!

  Welcome to the @DLBHJ forums

  I hope to help with installation issues you are having with your Officejet 4500 on Windows 10. Here are some steps to start you off. When you are finished, just reply to me with the results, errors, etc. Any information you can provide will help!

  1 uninstall all printer software that is currently installed.

  2 restart the printer and the computer entirely.

  3. clean boot the computer and restart it: How to clean the boot

  4. when the computer restarts, download and install the software here.

  5. once the printer installed, return to the boot process and re - activate the start up programs.

  I hope this helps and works. Let me know what happens.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• HP ENVY 17 Notebook PC: Plugged not supported message when plugged AC

  When my HP ENVY 17 Notebook PC is connected, it is is no longer in charge, and the battery icon says "plugged in, not load."  I ran a best of battery using HP Support, and the message says "battery reports a failure and should be replaced as soon as possible... ».  My laptop is less than 3 months.

  This means that the subsystem of loading of the motherboard is ok.

  Had considered running a recovery to see if it would solve the issue?

  I would try that before you send it.

  Beforeyou send in warranty repair, you must really have everything you don't want stored on an external drive anyway.

• HP envy Phoenix: win 7 does not start with connected external hard drive

  I have a desktop HP Envy Phoenix with i7 chip and an SSD for the OS.  If I connect via USB external drive of 3 TB WD for the backup of the system does not start while it is attached.  The pc seems to be trying to boot from the outside, can't find the OS and does not start.  It will start fine with small external drives connected.  It is the size of the disk? Is there a way to fix this?

  Hello

  The WD drives seem to pose problems of my potential.  I have used other brands such as Seagate and Hitachi without running into problems with external USB drives causing the system to boot.  Maybe it's the USB adapter that I use which does not cause starting problems.

  @tpetras

  I used the adapter HP USB 3, which uses drivers NEC or TI and has never had a problem starting via a USB external (non - WD) readers.

• HP Envy 700-529: hypervisor does not not on HP Envy 700-529

  Need to get virtualization running on my HP Envy 700 - 529 (bought on sale at BestBuy.ca) running Windows 10.  Have successfully installed all the object (I think), but get the following error when I try to commit to Hyper-v:

  https://www.dropbox.com/s/maf1w3mzbjzzz3d/screenshot%202015-10-23%2012.06.08.PNG?DL=0

  Error message reads as follows:

  "{VMID}" was able to start.
  
  Virtual machine "{VMID}" could not be started because the hypervisor is not running.
  ...

  .. .and the message continues.

  Can anyone offer any assistance?  Update the chipset using the downloaded from the section "Software and Drivers" http://support.hp.com site seems not had any effect (although I don't quite know I use it correctly).

  Any help appreciated!

  
  Ross is a .NET software developer, currently working as a consultant for the Government of Canada in Ottawa - the Canada national capital.

  Hello

  You will need boot into the BIOS and change the following default setting is disable.

  

  Thanks for posting on the forum.