HP 6500 709n printer will not print in black.

Similar Questions

• My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  HP Pavilion D7, Windows 7, all parameters are good, network connected, all permit

  Hi ashkin1975,

  Please disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  From the front of the printer: configuration > network > network by default.  Now, in the same network menu, run the Wireless Setup Wizard.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• HP 6500: hp officejet will not scan

  The printer cannot find the computer, I used scan and capture app win 10 such as recommended.  now I can't locate the printer/scanner in the app.  I used the host name and the sill of ip address will not take it says cannot locate.   My print work all work in Word, Excel and others, scan only does not contact hp 6500.  About ready to throw and go to someone elses printer.  I've never had this kind of problem is going all the way back to my Commodore 64.

  Hi @jmclark45,

  I'm glad to hear that your problem is solved and everything works fine now.

  The expanded Scan, this is what use the newer printers.

  Good day!

• HP Officejet 6500 Wireless print with black ink

  HP Officejet Wireless 6500 won't print with black ink. This printer as worked perfectly for years. Now, all of a sudden, he leaves by using black ink. All other colors are working very well. Any ideas?

  I tried several cleanings and reset by pressing on # and 3 when turning the power on. Nothing works, but the ink levels are declining due to all the cleanings trying to get this thing to work.

  I have it!

  I have searched all over the internet for a solution to this problem. Some people have the right idea, but not how to implement it.

  Problem: Black ink doesn't print all colors print but not

  Reason: for black print head is clogged.

  Implementation of solution:

  Set 920 ink jet cartridges in cartridge print head which is held in place by small arm on the right side of the ink cartridges.

  1. remove all the ink cartridges. I didn't want them to dry, so I wrapped them in plastic wrap.

  2. lift the arm and remove the print head cartridge.

  3 rinse the WHOLE print HEAD under a stream of water. I know it sounds crazy, but it will work. I thought it was best to rinse all the (not only black) because if I did not then the ink left any color would dry up and clog in any case!

  4. I leave the printhead to dry for about an hour, BUT IT DOES NOT WORK. When I handed the printhead my 6500 gave me an error message that it could not find the head of printing or something like that. I thought I ruined which was the risk I was willing to take. I went online and searched for a replacement at low prices. I immediately ordered it. But I have excluded the old printhead to dry just in case it is water which made it unnecessary.

  5. four days later I received a new printhead. Before I opened the package I tried the old an new AND IT WORKED! First, I installed the old print head cartridge, then each of the inks. After having done that, the 6500 did the rest. He went on a very long print head cleaning and alignment. He gave me the message "Please wait. Printer preparation occurring. »

  6. when the cleaning and alignment end it automatically prints a test page. It didn't look perfect the first time, but it was close. The message I got was, 'success. Alignment with success. Recycle or discard the printed page. Press Ok to continue. "The problem was that the ink cartridges were emptied of this whole process, even though they had about half of the ink when I removed them left. I changed the ink cartridges and did a cleaning and a level 2 cleaning and alignment. It worked!

  7. because I could not return the new printhead that I am now in case of failure of the print head for another reason.

  I don't know how long it will take to dry print head after rinsing but I know works of 4 days. Perhaps a few days would have been sufficient. If someone does and less time please let others know here.

  If you don't have success using my method, at least you know it will solve a new printhead. I paid about $35 for a new.

  Good luck!!

• HP 6500 Solution Center will not complete installation

  Hello:

  I was forced to reinstall the printer driver for the HP all in a 6500 because the fax feature would not work on several occasions.  After uninstalling and reinstalling the software on 3 occasions, I asks me to turn on the printer and plug in the USB cord.  I do this, but the software installation guide will not let me continue.  The 'next' button is grayed out.  I have to check the box indicating "finish the installation later.  After you select this option, the 'next' button is now available to choose.

  Because I choose Finish the installation process later, I can't launch the solution Center program.  I constantly get a message indicating that it does not start because the device is not complete.  He asks once again connect the cable that it is.  There was a patch update available software that ran when dealing with network connection, but it does not solve the problem.  What should I do now?  I have a printer that I can't use.

  Thank you...

  Hello jolly_mon,

  Please go to this page, which has options to choose your operating system.  Once you do, please select the option that matches your scenario and then perform the troubleshooting steps and let me know if it helps to solve your problem.

  Good luck!

• How can I make my officejet 6500 a print in black and white only?

  I am trying to print documents, not photos, in black and white.  The computer is a Macbook Air.  I'm looking for the manual, and I don't see how to set up printing black and white document WITHOUT PRINTING FAST current of AIR.

  Thanks a lot for helping me with this.

  I prefer, if possible, to make the default for printing black and white documents (which are not fast drafts). ***

  Hi @presentmomentum,

  Thanks for getting back to me.

  Here's how to adjust the color temperature:

  When you go to print a document, click on "Show details" (next, where it says PDF). Then click on 'TextEdit' and click on 'Type/quality paper.' From there, you can select the grayscale, black and white or color and toggle various levels of quality (Normal, Best project). If you use the grayscale function, you can choose just to use the black cartridge only.

  Let me know if it helps. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thank you for being a part of the community of HP.

  Have a great day!

• IPad will not exceed a black page with apple

  I don't know how to find info on the model for you because I can not activate it.  I repeatedly tried to charge my ipad.  By pressing the Home button and the button, (knowledge of course very sophisticated technology), turn to and Apple appears.  After a few minutes, the screen goes black.  I tried two different Chargers and cords.  I tried using a socket and charge through my laptop. I looked for information about the resolution of this problem, and it says to reset.  There was a video, but I couldn't follow directions.  Any suggestions?

  Hello Suzie,

  I understand that your iPad will not finish starting up. I know it's important to get these devices that we rely on so much to actually start up, so I'm happy to provide advice to help with this!

  Learn about the steps that we have listed for the same problem here:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

  Going through all these steps will use your iPad up and run again. Thank you for using communities of Apple Support, cheers!

• Office Jet 6500 E710n-z will not print black even just replace the cartridge with a new one.

  This is the 3rd time having problems on "black" even printing ink isn't empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem resolved.

  The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  As the ink is full this time and it worked fine when I just changed it, I suspect it is the problem of my printer instead of the cartridge.

  I did clean the print head and align the print heads, but the problem persists.  Please advice solution.  Thank you!

  I hope that the printhead has no need replace. I would like to look at this document on faulty production for your printer model.  I know some steps here mentioned you already make. Please just read / ignore those and try the ones you have not yet completed.  It presents various ways to clean the print head; If you have just done the cleaning of the box tools, I'd defiantly that manual. It also has a ride to make sure that the product firmware is up-to-date.  Here is the link: http://support.hp.com/us-en/document/c02455482

  I hope this helps.

• Printer will not work without black print cartridge

  I got a message saying I need to replace the black ink cartridge before I can print.

  Is there anyway I can print just using the color cartridges.

  Almost all colour cartridges are full, and I need to print something really urgent.

  My document is a word that has no color to black ink only.

  OK, get you the best quality, I would say replace the black cartridge with a new one.

• 6500 a E710A will not scan need resolution

  Installation E710A 6500 has several times and cannot get it tested.  It allows to analyze and stopped. Removed the loaded software print universal 8/3 and removed E710A SW printer and reinstalled like Ethernet and can print USB or network.  Scan does not open printer or computer wireless SW. Neither USB that I loaded updates and firmware.  Still nothing.  Can someone tell me how to configure it to scan at least in a sense, the computer or the printer itself.

  Hello

  Open the software HP Officejet 6500 E710 and then click the utilities tab.

  Then click on HP print and Scan doctor, and follow the steps on the screen in wonloading the tool and selecting the difficulty of analysis.

  Please let me know the product, is it an error or the test?

  Shlomi

• OfficeJet 6500 Solution center will not install/help files missing

  Hey community:

  Have tried several times to install Officejet 6500 with the solutioncenter does not.  When I click on the icon to get an error message that the solution center was not installing correctly.  I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.

  All proposals/solutions.  Am disappointed right now with the Hp Printer.  Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.

  In addition, I don't have the help files to set up the printer.  Any help on that would be great.

  There could be two questions

  1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software

  2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.

• 6500 E709n installs will not perform at the stage set up.

  The installation seems to have been completed, but when it gets to the final stage, set up printer, it just continues to spin and never ends... I tried reinstalling 3 times and the same result.  I can print to it but can't scan a document or image.

  HP Envy 14 is running Windows 7. I downloaded the software from the HP website for the drive I have is for XP or Vista... my old desktop was working fine using the diskette.  It would be wise to try this drive?  Any other suggestions?

  That is great news! Well like you I'm not sure why all of a sudden, he was able to install properly, perhaps simply a break lol be glad that you're facing up and running. Thanks again for the update

• Computer Pavilion laptop will not turn on black screen

  Hello

  I just turned on my computer laptop pavilion dv6 (almost three years), and it does not start. Instead, I got a blackscreen.

  The capital block and the keypad lights turn on and off all the time, but I can't do anything. I can't enter the bios, the recovery or anything like that. My computer just seems to be in limbo, and I can only turn it off by pressing the power button.

  I have windows 7.

  Thank you very much for your support

  Hello cristiaan4,

  Welcome to the HP Forums! I hope you enjoy your stay.

  I understand your computer screen is blank and there are LED turn signals. I will do my best to help you, and I apologize for the delay.

  To fix this, I encourage you to please try the steps outlined in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

  This document you will help idenfying the source of the problem and can suggest many corrections. I believe that the problem can be solved by trying these steps. If this is not the case, the computer doesn't have a hardware problem. To remedy, please contact HP telephone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  I hope this information helps you. Please let me know your results. Thanks for posting on the HP Forums. Have a great day!

  Mario