HP 6500 and chromebook

Similar Questions

• HP 6500 Office Jet: is there a difference between an office jet 6500 and the other with a 'a' or 'more '.

  Hello, first post here.

  They gave me an office jet 6500 without the cd rom set up the disc. The Unit came with 4 new cartridges. Started trying to get to the top and running and first it attracts not paper. Checked this site and resolved that. (temporaily?) Then saw that it was low out of ink. Installed the new trolleys. Colors work very well, but not black.

  I have no cd rom for this and not manual.

  I see that you can download the establishment, but was intrigued by the mention of a 6500 and 6500 more, not sure I have those. On the front it says "HP office jet 6500 wireless.

  So I guess I have to run the cleaning jet. I started scrolling menu, but was rerouted it says there is no connected computer. Do I need to clean the jets?

  I could shoot for today with a work properly stand-alone copy/printer. But I would not mind at all followed with setting up wireless on my sony pcv-rx752 pc. We use at + t here with a wireless router.

  Hello

  First, click on the install button, select network and follow the Wireless Setup Wizard to connect the printer to your home network.

  Then download and install the following drivers for wireless HP Officejet 6500 (E709n) model:

  The 6500 has a different model then one you have...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77752-3 & CC = US & DLC = in & LC = on & os = 228 & productOid = 3795393 & sw_lang =

  Shlomi

• OfficeJet 6500 and router Wireless does not connect

  I just bought an Officejet 6500 and try to connect to my wireless router.  Whenever I try to connect the printer to wireless it crashes.  The power button does not light, but the screen is lit without text.  At this point, I can't close or get it running again.  I am running Vista Business 64-bit, and the router is a 2wire 1800 HG through AT & T.  It works very well with a usb connection.

  Thanks in advance.  John

  I think you just meet a known issue with some printers of HP network with routers 2WIRE AT & T DSL.

  Have identified us the problem and will deploy an update in the future.  So far, the work around is to assign a static IP address to the printer. Here's a way to do this:

  1. Unplug the phone line from the 2WIRE router
  2. Cut the power to the 2WIRE router, wait 30 seconds, then turn on the power.
  3. Go through the normal process of the printer connected to the 2WIRE (Ethernet or Wi - Fi) device. The printer will not crash as long as the telephone line is disconnected from the 2WIRE device.
  4. The Officejet front panel, go to the menu of 'Advanced Setup' under 'network '.
  5. Select 'Settings of intellectual property', acknowledge receipt of the warning and select "" manual IP ".
  6. Select "IP address" and change the last group of IPS (byte) to something higher or lower. Specifically to your 2WIRE router, select 192.168.0.60.
  7. Press Ok and plug the phone line into the 2WIRE router.
   

• 6500 and 7600 Series VPN

  Hello

  Is it possible to do the encryption without buying hardware IPSec VPN shared Port Adapter (SPA) for chassis 6500 and 7600?

  Thank you

  Unless something has changed recently is (no VPNSM, VPN - SPA or WS-IPSEC-3)

  "IPSec tunnel with the help of crypto software"

  http://www.Cisco.com/c/en/us/TD/docs/interfaces_modules/shared_port_adap...

• OfficeJet 6500 and Internet Explorer

  I just installed the OfficeJet 6500 (wired) and started having problems when closing down Internet Explorer. He ALWAYS told me that IE has stopped responding, but only when I was close anyway. IE has continued to work well when you surf

  I went through my list of startup (msconfig) and it turns out that it was the "HP Digital Imaging - hp all in a series" that was the culprit. I disabled it on startup and the problem disappeared.

  Is there a solution for this.

  What should I start up for my printer works fine with all its bells and whistles.

  Thank you

  This is caused by the HP Smart Web Printing program. uninstall programs and features, and it should work fine.

• OfficeJet 6500 and Mavericks

  I upgraded to the Mavericks, when I got my new MacBook Pro last month. I just tried the printer connection and it's a no go. After HOURS of research... that website... I found these directions:

  http://support.HP.com/us-en/document/c03967522

  Unfortunately, I followed and uninstalled the HP software before installing the new software. Before I did, I was just messing around in the hope of finding a solution and I tried to re-adding the printer (you can see my computer) and he had the box 'USE', which had the name of the printer (Officejet 6500 blah blah) and AirPrint option two. Thinking that I didn't know as much as the official people who manufactured the product, I decided to search online before clicking on the name of the printer in the area USE and installation of the printer.

  Now that I uninstalled the software by fashion, only AirPrint is available. I can't find Officejet 6500 in the area USE even if I click on some software. I tried AirPrint anyway and found that the computer says the printer is available for use but nothing to actually print and certainly nothing scans as it says there is no software for this product. I spent 2 hours on this site, try to find a solution at this point and I'm completely exasperated. Guess I'll have to analyze everything to work tomorrow.

  Found the answer in the last 2 minutes...

  Turn the printer power off and power on.

  Technology :/

• HP Deskjet 3510: Software of digitization and Chromebook

  Don't know how to install the scanner to the computer software.  I don't have any software and only is a zip drive.  I see the instructions for everything except the Chrome.  Please help me find the software.  Thanks in advance!

  Hello @bon920,

  Welcome to the Forums of HP and thanks for posting!

  I want to help you learn how to scan from your HP Deskjet 3510 to Chromebook all-in-one printer.

  Because the Chromebook Chrome operating system is a mobile operating system, you can not install the normal software and drivers that you might on a Windows or Mac computer.

  That being said, you can scan your Chromebook using Webscan located in the integrated Web (EWS) of your printer server. Note: The printer must be installed on your network to do this.

  First, you will need the IP address of your printer. You can find this by printing a page of Network Configuration of your printer. Here are the steps.

  • On the printer control panel, press the wireless button (), then press the button () next to settings.

• OfficeJet 6500 and mountain lion

  I installed mountain lion and now my officejet 6500 will not print, or it prints, but after an hour or two after the print job is sent.

  I deleted the driver and reassembled using the apple software update, the problem persists. Any ideas out there?

  Ok

  Try to update the drivers by clicking on the icon Apple and then software update, restart and check any change.

  If there is no change don't try to install the package below:

  http://support.Apple.com/kb/DL907

  If the problem persists, make sure that the USB port used is not longer than 2 m long, with direct links to a MAc and not through a hub USB or extension.

  In case you have an iMac, make sure to plug the USB at the back of the Mac and not in the keyboard port which is not powered.

  It will be useful,

  Shlomi

• Pavilion 6500: I have a hp pavilion 6500 and no idea of what the admin password.

  I have a hp pavilion 6500 windows vista 64-bit and asked an administrator password to market. of course we have no idea what this could be so we're stuck. the stop code we get is 14713. I would greatly appreciate any help we can get to get on the laptop again.

  Try > kczygv

• Want to 4250: scanning with envy 4250 and Chromebook

  I'm trying to scan a picture on a 4250 desire.  My infographic is a Chromebook.  Get the message 'No computer found' when I hit the scan icon.  How do want to scan to the cloud of Google?

  Hi @FloridaGeorge,

  Welcome to the Forums of HP's Support. I understand that you want to scan a document with your Envy printer and access with your Chromebook.

  It is not as easy to do on a Chromebook. If you had a Windows PC or a Mac, you would be able to use the software of the printer.  Some printers have a function of e-mail scanning. It is of a decent workaround if your printer supports scanning to e-mail.

  If your printer does not support scanning to e-mail, try the steps in the following video.

  https://www.YouTube.com/watch?v=QL1obc9FDyI

• Policy Based Routing Configurations 6500 and 4948 Switches

  Hello!

  I'm looking for good examples of the strategy for the 6509 and 4948-based routing Configuration.

  I have installation of base ACB, but can not find good IPSLA configurations to pair with them.

  The 4948 has IPSLA, but doesn't seem to have orders to attach it to the ACB roadmap.

  I'm not find effective IPSLA configurations for the 6500 as well.

  My hope is that someone has config IPSLA I can use, or direct me to an example of configuration is complete.

  This is for the redirection of a WAN accelerator to monitor.

  What I have so far for the 4948:

  interface GigabitEthernet1/11
  Description to_dis_pri:g2/0/11
  No switchport
  IP 11.11.11.10 255.255.255.252
  political ownership intellectual-card route Silverpeak
  Speed 1000
  full duplex

  SilverpeakACL extended IP access list
  IP enable any 12.12.12.0 0.0.0.255

  ALS IP 99
  ICMP echo - 14.14.14.14
  Timeout 2000
  frequency 10
  Annex IP SLA 99 life never start-time now

  Silverpeak allowed 10 route map
  corresponds to the IP SilverpeakACL
  IP 14.14.14.14 jump according to the value

  I don't see how this will stop Policy Based Routing in the event where the WAN Accelerator dies.

  If you know where I can get the config, or give it here, I would be very happy!

   Hi Ganesh, It did take that command, and this is the output:: #sho track 99 Track 99 IP SLA 99 reachability Reachability is Up 1 change, last change 00:00:16 Latest operation return code: OK Latest RTT (millisecs) 1 Will this tie it all together? Also, will this be the same config for the 6509?

  Hello

  I think that you apply IP SLA on edge device where you want automatic failover, if she applies then the 6509.

  Once this output is ok then apply the command track with map of the route according to the first post.

  It could be that useful...

  -GI

  Rate if this can help...

• Problem scanning with HP 6500 and OSX 10.9 (Maverick)

  Does not my laptop MacBook Pro scan after that I downloaded Maverick OSX 10.9.  Analysis to preview, but does not send an analysis appropriate to the destination (for example, IPhoto).  I get a white or black table.  The scanner says no. Options of Scanner.  If I go to copy, and then again to scan, I can scan something manually.  FYI, something similar happened with my Epson Scanner the same day after I downloaded Maverick.

  Hi EllieCross,

  I understand that you can not scan with HPb110a after updating to os x 10.9 Mavericks.

  If you follow this document it will show you how to scan with Capture of Image

  http://www.switchingtomac.com/tutorials/how-to-scan-in-OS-x-using-image-capture/

  Thank you

• 6500 and easy vpn client

  Can I connect a PC with easy vpn client with a vpn service module 6500?

  Are there examples in the Web?

  Take a look at the following link as there some configuration examples that should help you.

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/cat6000/cfgnotes/78_14459.htm

• OfficeJet 6500 and USB on Windows 7 64 bit does not (wireless works fine)

  Hello world.

  New printer. WiFi Of my different laptops works very well. However my main system is not in wireless. Try to install via a USB port. When I plug the printer Windows 7 sees it but I can't get the drivers to install correctly to where I can use fax/scan options. I can print, but I can't do anything else. If I go to the device, the printer appears with the correct name, but says that the driver is not installed. If I try to install manually (using the disk) it barfs and says that the driver is not digitally signed.

  When I run the installation of the software (I downloaded the new installation driver package Basic and full) and I get to the point he wants me to plug the printer, it starts the installation but then Windows barfs and said "no driver found" and then the HP installation fails. It's almost as if Windows 7 is blocking the device when it cannot find a driver. I tried to disable 'automatically install the drivers', but then the installation of HP does not see the printer when it is plugged.

  Basically I'm going nuts and is getting ready to send this printer to Costco, get a Canon. I know the drivers of Canon works because my neighbor has the same configuration as me and his printer, installed fine. I prefer the HP (well, I did) but tired of beating my head against the wall. Anyone have any ideas?

  Thank you

  . / height

  I figured this out. The USB driver would never install. I beat my head against the wall for days and never thought about it. However, I didn't know that I could install the drivers on my main PC with no wireless connectivity wireless. Has a cable LAN connectivity. Apparently my wireless router is smart enough (like most) to send the print queue through my local network to the wireless printer.

  So I just installed the software wireless on my 64 bit WIndows 7 system and I print just as if I was of my laptops wireless.

  I wanted to just update everyone because it isn't really all that clear that you do know. print even if you are wired to the wireless printer.

  See you soon,.

  Dave

• 3.3.1 and 6500 CSM

  Hello

  We are facing a problem with a CSM 3.3.1 switch and 6500 and FWSM. We have 2 x 6500 switches with 2 supervisors each + 2 cards FWSM one in each frame. The problem is that we have MSC 3.3.1 who manages the switch and FWSM. The problem is that when we try to delete a VLAN to 6500 we get a deployment failed because the switch will display this message:

  Change VLAN applying % can take a few minutes. Please wait..

  We use the following version of IOS.

  CSR-CORE #sh worm

  Cisco IOS software, software of s72033_rp (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2 (33) SXI2a, VERSION of the SOFTWARE (fc2)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2009 by Cisco Systems, Inc.

  Last update Wed 02 - Sep - 09 01:00 by prod_rel_team

  ROM: System Bootstrap, SX6 Version 12.2 (17r), RELEASE SOFTWARE (fc1)

  The availability of CSR-CORE is 22 weeks, 6 days, 23 hours, 59 minutes

  Availability for this control processor is 22 weeks, 6 days, 23 hours, 55 minutes

  Since CSR-CORE time spent active is 22 weeks, 6 days, 23 hours, 55 minutes

  System returned to ROM by power cycle at 06:42:16 UTC Friday, February 12, 2010 (market SP)

  System restarted at 11:10:39 IS Monday, June 14, 2010

  System image file is "sup - bootdisk:s72033 - ipservicesk9_wan - mz.122 - 33.SXI2a.bin".

  Reload last reason: reload command

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  processor of WS-C6509-E (R7000) Cisco (revision 1.5) with 983008K / 65536K bytes of memory.

  Card processor ID SMC1401000U

  SR71000 pace at 600 Mhz, implemented 0 x 504, Rev 1.2, 512 KB of L2 Cache

  Last reset to reset the s/w

  30 virtual Ethernet interfaces

  116 of the gigabit Ethernet interfaces

  12 ten interfaces Ethernet Gigabit

  1917K bytes of non-volatile configuration memory.

  8192K bytes of packet buffer.

  65536 K bytes of Flash internal SIMM (sector size of 512K).

  Configuration register is 0 x 2102

  CSR-CORE #.

  Note that we don't use vs.
  TIA,
  Nicos

  Hi Nicolas,.

  answer Panos answers your question? Otherwise, let know us and we will investigate further.

  Thank you

  Stefano