HP 8 g2: G2 HP TABLET didn't open the menu

Similar Questions

• When I right click on the desktop I no lnger didn't get the menu drop-down normal.

  Y at - it a shortcut or another way to trigger this menu, or repair my right click?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         What exactly happens when you right click?

  I would say that are you talking about follow the steps below:

  Method 1:

  Run the System File Checker tool to troubleshoot missing or corrupted system files.  Follow the steps in the link:

  http://support.Microsoft.com/kb/929833

  Method 2:

  If the previous step fails, create new user account. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Portege 3500 didn't detect the HARD drive in the BIOS

  Hi forum,

  I go out the HARD drive, when I stick to the rear; the BIOS didn't detect the HARD drive.
  How can I configure the HARD drive in the BIOS? The discs i/o isn't editable t option.

  I need urgent help...

  Thank you

  Try to access the BIOS and set the defaults. Don t forget to save the changes. ;)

  A friend of mine had a similar problem and the BIOS default settings has been the key.

  So check it out

• Surfing the internet on my iphone, I got a pop-up message warning me that I had a virus that could be stolen my information of credit card through my webcam and call 1-844-854-6870.  I didn't call the number?

  Surfing the internet on my iphone, I received a pop-up message stating that I had a virus that could fly as well as personal information and credit card information used on the phone.  That I should call 1-844-854-6870 immediately to get the virus removed.  I didn't call the number, but rather made sure my privacy filters were ignited, powered my phone is off and connected my office here.  What should I do to make sure that I do not have a virus on my iphone?

  It's just a scam.

  Force restart our iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  As long as you call the number or allow anyone access to your iPhone, so there is no worry for a virus.

• Tablet Acer a700 to the Office jet j6480 printer drivers

  Need drivers for Tablet a700 Acer for the HP office jet j6480 printer range.  See no printer, try for the wireless.  Not sure if this is what is needed.     Thanks for any help

  The Acer A700 is an Android Tablet and doesn't use Windows drivers (or Apple) to print to a wireless printer...

  You must download and install the HP ePrint app from the game store to get access.

  I move this post to the ePrint to the forum section to better focus.

  WyreNut

• I can't open the Tablet PC Input Panel

  I can't open the Tablet PC Input Panel. The works of pen for mouse type point and click actions, but I can't open Input Panel to use the handwriting function or the soft keyboard for input.  Any suggestions as to what is happening and how to fix it?

  Hello

  1. have you made changes on the computer recently?
  2. when the Tablet PC Input Panel worked very well?

  Try to follow this link.
  Using Tablet PC Input Panel: http://msdn.microsoft.com/en-us/library/ms818563.aspx

  How to use the Input Panel icon in place floating on Windows XP Tablet PC edition 2005:
  http://support.Microsoft.com/kb/885500

  For more information, see these articles.

  http://Windows.Microsoft.com/en-us/Windows-Vista/write-it-out-using-Tablet-PC-Input-Panel-instead-of-your-keyboard

  http://Windows.Microsoft.com/en-us/Windows-Vista/opening-and-moving-Tablet-PC-Input-Panel

  I hope this helps.

• my Tablet starts, but then the Tablet freezes

  I can connect, but once on the Tablet, the screen freezes and the screen cannot slide upward or downward, to connect.   I'm terrified I'll permanently closed out!, any solution? I have the HP Omni 10 Tablet. I bought the 1st June. Donna

  Hey @donnah70 ,

  Welcome to the HP Forums!

  I understand that you are having problems with your Tablet 10 Omni gel on the login screen.

  It seems that the touch screen is not responding. Try to use the built in recovery by pressing the button + Volume and the Power button at the same time to turn on the tablet. This you should get a blue screen which you can navigate and perform a system restore. Recovering the system will return the tablet to its original factory condition.

  If this does not please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

  Thank you!

• My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) what are the troubleshooting steps you tried to solve the problem?

  I suggest you follow the steps in the KB article below and check if it helps:

  http://support.Microsoft.com/kb/968002

  Hope this information is helpful

• My Dell coming 8 Pro Tablet cannot connect to the internet

  After that the last update, my Tablet Windows couldn't access the internet. I get this message when I run a troubleshooting tool:

  "The Dell Wireless 1538.802.11 a / ln g adapter knows pilot - or hardware-related problems."

  My tablet is our guarantee.

  I contacted Dell support via my laptop and got absolutely nowhere, was mixed around until I finally got a page that asked me several times for my service ticket #.  Whenever I provided, he gave me the same screen, he demands again. A little surreal.

  So here's what I know: my Tablet has no wi - fi connection. My tablet is plugged into my laptop, but my laptop does not recognize it as a drive. So I can't transfer anything directly from the internet on my Tablet through my laptop.

  (They are both products of Dell. Family feud?)

  So I need to find a way to get information on my Tablet without a direct connection and wi - fi, in which case the problem requires that.

  Or it could just be a problem with Windows Update. A year ago, someone has answered a similar question on this forum and advised the questioner to find the numbered Windows updates installed Xxxx and Xxxx, then uninstall them. The numbers, of course, do not match updates that have been installed just before that my internet connection disappeared. So I would have no idea what to uninstall.

  I would appreciate any advice on how to solve this problem.

  Thank you

  Janice

  In a general way, because your DV8P is a complete computer, you can just connect to your PC you could do with a smartphone (you may be able to do using a special cable).

  To solve the problem of WiFi:

  I had this problem and Dell technical assistance asked me to do a 'discharge' on the Tablet (apparently, static can accumulate in the Tablet, leading to the issue of WiFi).  Disconnect the power supply, if connected. Hold down the power button / stop of the Tablet and turn the Tablet completely off, continue to press and hold the power for 30 seconds (or maybe a minute); Let the only Tablet for 2 minutes; the Tablet is reactivated.  Which, we hope, will fix the problem (it was for me).

• When I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system."

  Tablet not working help please
  OK so I have a tablet that I use to draw for my photoshop... it worked perfectly fine but when I tried after months of non-use, it won't work. and when I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system." I know that it worked because I installed it but now it's just dosnt work... Please help me because I want to draw again.

  Hi LoverofDrawing,

  I suggest you reinstall the drivers for the tablet on the computer by visiting the manufacturer of the Tablet and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Cannot install Windows 7 "Windows didn't prepare the computer to start the next phase of the installation." to install Windows, restart the application.

  Original title: Installation of Windows 7.

  I tried to install Windows 7 (clean install from XP and reveived the following message is displayed:)

  Windows didn't prepare the computer to start the next phase of the installation.  to install Windows, restart the application.

  I restarted my PC, anti anti-virus disabled (as advised) and still get the error message.

  According to the Upgrade Advisor Windows 7 my PC is compatible.

  Any ideas?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• x220t - conversion to tablet mode go to the portrait

  How can I disable the portrait mode?  Since the upgrade to Windows 8, I downloaded and installed new drivers.  One of them got the job so that I can rotate the screen and convert to the tablet of orientation, but I want to go only to the landscape reversed (without having to press the button to change it).

  I've already put the 'choose the order in which your screen turns' be set to ONLY modes two landscape.  It works for the button, but any driver Lenovo supports change of screen orientation when the joint is rotated is ignoring these parameters.

  Well, this problem is solved.

  Throw "Menu contextual Tablet" Windows 8 start screen does not work.  This application has a strange problem I really did not occur in other applications.  When else it gets the focus of Windows, he kills himself.  Thus, the new start in Windows 8 lance screen this application and then restores focus on the desktop in order to make the application visible.  This causes the app to kill himself before a user can never see it!  Dear Lenovo, if you please correct it.  It's silly.  Let just the app stay on the screen until the closing like any other application.

  The work around:

  Right click on the shortcut for "Tablet Shortcut Menu", and then click 'Open file location' in the menu at the bottom of the screen.  Double-click the shortcut to the folder that is opened in Windows desktop view. You can also run the executable file directly.  For my PC, it is located in the:

  "C:\Program Files (x 86) \ThinkPad\Tablet.

  Now, to change the setting of the auto-rotation, I was looking for:

  Click settings.  Under the subheading of the Automatic Screen Rotation (which should be checked) I had to choose "secondary landscape".  Voila, no more mode switch portrait when the screen is rotated to tablet mode - it goes to the secondary landscape (180 degree rotation).

• just formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded

  I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .

  Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.

  Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

  http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

  If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  With Windows XP installed first:
  http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/

• Tablet Wacom nonfunctional after the awakening of the mode standby

  I have Windows 8,

  Dual core 2.8 ghz intel, 8 GB of ram.

  I use a Wacom Bamboo (ctl 471) splash tablet.

  I installed the latest windows drivers 8 Wacom.

  When my computer wakes from sleep mode, the Tablet no longer works.

  I have to restart the computer to make it work.

  That kind of defeats the whole purpose of the mode 'sleep'.

  Any ideas?

  Hi eingram,

  Thank you for choosing Windows 8 and for giving us the opportunity to help you.

  I understand that the tablet will not work after waking from sleep. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  Method 1: I would uninstall drivers and reinstall them.

  a. open the key Device Manager by pressing Windows + R and type Devmgmt.msc

  (b) display or touch drivers.

  c. Please, right click and try to uninstall the driver.

  d. restart the computer and the update.

  Run the troubleshooter of material and check.

  Method 2: Follow the steps to run the Troubleshooter:

  a. press Windows + C keys on your keyboard to show the charms.

  b. type troubleshooting, and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the search option.

  d. click convenience hardware store to run the troubleshooter.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• I open the muse of adobe and I want to start a new site, but there are no buttons to choose for tablet or phone

  I open adobe muse and want to start a new site that is available for phones and tablets.

  But there is no button to choose the format for tablet or phone.

  It would be the second home page.

  In one it automatically button appeared.

  You can retrieve these buttons! Take a look in the menu "Page!