HP 8600: HP Scan, scan the incorrect paper size

Similar Questions

• Is it possible to analyze infrastructure were returned by the device of scanning the hard drive size/capacity

  Is it possible to analyze infrastructure were returned by the device of scanning the hard drive size/capacity

  Well, Foglight can certainly, as indicated above, Robert fired in a mode without agent disc information.

• Paper size error: the custom paper size specified is not supported in the selected state bar

  I am trying to print on custom size paper (9.25 "x 3,875").

  I have OSX Lion and a 8600 Officepro more.

  I inserted the paper into the tray of my 8600 Officepro more.  I adjusted the sliding walls to match the size of the paper.

  I created a new custom in my print settings format.

  But the printer says:

  Paper size error: the custom paper size specified is not supported in the selected tray.

  What the...?  How that recalcitrant monstrosity to behave and do what I have to say?

  Here is the link to the manuals for the 8600 Pro JO.

  You want the user's guide.

• problem with the HP 7310 - incorrect paper size fax

  I have a hp 7310 printer/fax/copyer and everything that he was working great until that earlier

  fax work perfect until we started to get a paper size incorrect message when receive us a fax

  We set it up to 4 rings

  We also have a fax set up report

  I tried different formats (as well as in setting up fron a4, letter, legal)

  even tried different weight

  nothing seams to fix the problem

  Thus, when receive us a fax, it rings 4 times... print a blank page... stop and it says wrong paper size... If you press ok, it prints the fax and fax report

  any ideas?

  don't know if it's a part of it as well when we're going to copy something the scaner it going long stubborn to scan... like 5 min it will print the item which has been fine scanded

  Thank you

  anyone until we change our all hp printers out for new... it will not a hp after that

• minimum height of paper ip8720 in the custom paper sizes

  With the help of ip8720, when I set the height to 4.25 in custom paper size the image does not print correctly. If I leave the printer set the margins, I get the message «the limits of paper as defined by the PPD file size are a minimum height of 5 inches...» "If I set the margins mysself (to 0) part of the image is printed in a corner, not there at - there no way to print with a 4.25 inches paper size?  I could do with my old Canon printer. The reason why I need to this size, it's that I'm trying to print a photo on the bottom half of the book which is actually 5.5 wide and 8.5 high. I need only on the bottom so that I can then fold paper to make a card with the image on the widthx height 5.5 before - so 4.25 will not work in this case... the height must be 4,25 and width of 5.5 inches. Thanks for any ideas you may have. (I use an iMac).

  Hello.

  The minimum supported size is 3.5 inches wide by 5 inches high.  If the height is specified as something more smaller than 5 inches it will not print to avoid paper jams or feeding problems in case the book is actually less than 5 inches high.

  If you need additional information, find more help contact us.

• HP Laserjet M401A: HP Laserjet M401A not will mark the different paper size and tray on the printer properties

  Hello all.

  I have a custom paper size in question and the plateau in the properties of this printer.

  I would like to implement three different printers on the same port, to print directly on a specific tray (without going into the properties of the printer and select the appropriate tray and size).

  I have this printer with the additional third tray.

  I implemented the A4 in the Tray 1 (bypass), a custom size in tray 2 and 3 on the printer.

  When I enter the printer PROPERTIES I want to set up the paper size in tray 2 and 3 value. No question.

  The only sizes I see is 13 x 8, a4, a5, letter, legal and so on (there are choices may 7).

  So, I choose NON SPECIFIC.

  When I go to printer PREFERENCES, I can set up my custom paper size.

  But when I choose my custom paper size, tray 2 and 3 go away and I can choose only bypass or Tray 1.

  If I attributed to A5 (for example) the tray 2 and 3 re - appear.

  How is that possible? where I'm wrong?

  Thank you very much, any help would be appreciated.

  See you soon,.

  Luca.

  Hi Luca,

  That is expected, custom paper sizes are supported only on tray 1.

  Tray 2 and 3 are supported specific sizes of paper.

  You my find graphics of the following as a reference, it lists a paaper supported size for each tray:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5096252&docid=emr_na-c03303423&docLocale=en_US

  Kind regards

  Shlomi

• OfficeJet Pro 8600 does not recognize the 2nd paper tray

  I've set up the 2nd tray in system preferences by checking the box for an additional tray, although it seems sometimes to uncheck because when I go back to it is checked, it is not. Somewhere I found the Source setting and I saw 2 trays, but now I don't remember where it was to check again. However, when I try to use the parameters to define a default tray and lock in the status bar on the printer itself, it simply does not list the second set as being there. So there is nothing to choose or define. At one point, even though I didn't click to print, it seemed as if he was going to print something but then says there is more paper in the tray. But there was.

  I am on an iMac 10.8.5 OS and just bought this printer. I connected with ethernet.

  Hello

  I ask you to try the procedure described in the following link:

  http://support.HP.com/us-en/document/c03160525

  Although I am an employee of HP, I speak for myself and not for HP.

  　

  Say thank you by clicking on the "Bravo!" Star"who is on the left
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem

  　

  Kind regards

  Ray

• PDF files download via imap with the incorrect file size and is considered to be "corrupted".

  Hello

  I have a computer that is using thunderbird for imap emails. Any time I try to view a pdf, the open used attachment attachment and is reported as damaged. I downloaded a PDF directly from godaddy (mail host) and I can view the file properly. I also noticed that the file I tested was 105K when shown on the godaddy webmail but it was only 103K when appearing as an attachment under thunderbird. I also forwarded the email to myself since the webmail and when I open the email of forwareded, the size of the file is correct and the pdf file now opens. I would like to be able to open PDF files with thunderbird without having to send them to myself since the webmail. Are there settings I could change so that PDF files will be correct the first time?

  Thank you

  Try this: open Tools/Options/Advanced/general/Config. Editor, double-click on the mail.server.default.fetch_by_chunks preference to change its value from true to false, close the Config. Editor, OK, restart TB and see if you still have problems to open the attachments.

• Printing problems with a Canon Pixma MX882 do not print the correct paper size.

  This is a new PROBLEM.  Never had this problem before.

  I'm under Windows8, 64 bit.

  I am suddenly unable to print all labels postage to NORMAL size = 100%.

  He coinstantsly everything shrinks to half size no matter what I change settings.

  I've looked through the software and the printer settings and may NOT know what is the cause of the problem.

  The assumption is that MS Updates caused the problem.
  The resolution has been going to the Canon USA site.
  The very recent updated drivers was available for my printer.
  Download and install the updated drivers solves the problem.

• paper detected does not match the paper size

  After clearing a paper jam when I go to print the 7310 all in one, beeps and has "paper detected does not match size of paper or type". When I hit OK the printed page is slightly bias. How can I fix it?

  First thing I want you to try is cleaning the rollers.  You said that the printed pages were asymmetrical.  Which can be the cause of the printer read the incorrect paper size and give this message.  The document below the link should help you clear up the problem of tilt.  Let me know what happens.

  http://support.HP.com/us-en/document/c00242765

• Print on the envelope paper

  I have created 4 "x 9' standard size 'door card' in MS Word."  When I print this document to the 'Envelope' pre-selected on the 8600 printer paper size, height 1/2 "copy is empty.  It will not print to the edge.  Print preview is also blank on the top of page 1/2 ".  I tried 'everything' for this problem.

  If I print the same document, but a document 8.5 "x 11" 8.5 "x 11" paper, it prints correctly all the way to the top. "

  Suggestions?

  Geoffrey

  The store owner

  I am betting that with the old printer you need to define a custom paper size so he can feed. With the 8600, the custom paper size function has been removed. I bet that if you assign the printer to use another driver, it will work as did the 3180. This post I've done will be to guide you through the process. Let me know what happens.

• Color LaserJet CM1312nfi MFP that gives the message 'unexpected paper size ".

  In recent months, when I print a set of envelopes, after EACH envelope my printer gives me a message "unexpected paper size".  This forces me to press the 'OK' button to continue to the next task.  After that, the printer goes into a long routine of 'cleaning up' before printing the next envelope.

  The printer is behaving that way when it was new.  He started to do this only in the last few months.  If I print an envelope, between two printing on standard paper 8 1/2 "x 11" does not display the "unexpected paper size".

  And by the way, what is the problem with HP, saying that the cat is not available for my product and support pages e-mail not recognizing my product number?  Just because a machine is a couple of years, HP is going to abandon me entirely to my own when it malfunctions?

  Fixed it myself.

  I have restored the default settings, and the problem disappeared.  Press the "Setup" button, then choose "Service, Restore Defaults".

  Unfortunately, these forums seem pretty useless.

• HP Officejet 4622 will not print simple controls because it does not recognize the paper size.

  Product: HP deskjet 4622 All In One

  operating system: Windows 7

  Software used: Quicken Starter Edition 2011

  My printer refuses a single cheque due to the size of the paper being not recognized by the printer. The actual size of the individual audit is 8 1/2 inch wide and 5 1/4 inch from top. There is no size in the settings of the default paper size that matches the paper size... The quicken software print 1, 2 or 3 controls on a sheet so if I print 2 verifies that leavesme with a single cheque that is wasted because my printer does not recognize the size. My previous HP printer did not have this problem.

  Someone at - it suggestions?

  xgdude, unfortunately this printer does not support true custom paper sizes, he acknowledged instead the paper types that are commonly used in the United States. This is because the non-traditional types of paper are difficult for the printer to recognize and inside the right margin of the printing error.

  I hope this information is useful!

• OfficeJet Pro 8600 Premium error paper size does not match

  I try to print an envelope #10 that I printed several times in the past, but today I get the error that the detected paper size does not match.  I print on MS Word with the selected for the #10 envelope paper size.  I loaded the envelope properly.  Why is he not feel today when it was fine yesterday?

  Hello

  The application, go to Printer preferences. What size and type of paper is selected here?

  You have restarted your computer since yesterday?

  Thank you

• What new photoquality garlic in those support paper size in the printer driver?

  I have a new HP Photosmart AIO 7510.  Much to my surprise the printer driver does not support create 6.5X10 inches, 5.5X8.5 inches for card stock for example custom paper sizes.  I used to have this feature in my old HP Photosmart 5150C all-in-one.  My PC is Windows 7 Edition home premium, SP1 operating system.

  Is anyone know 1. What new models - printer or in a single - support a photo quality printing and custom paper sizes?  Am open to return my current template and replace it with a new model of HP.  Or with Canon, Epson. anything that works to regain this ability.

  or 2.  is there another driver that is compatible with the 7510 which will create custom paper sizes and quality photo printing.

  You can use customized with the 7510 paper sizes, but you must use another driver to do it. Follow the steps in the post below the link for your operating system. With the help of the other driver should get the custom print size to work. Hope that helps.

  How to assign other print in different Versions of Windows drivers:
  http://goo.GL/zCk2r