HP A6200N PC not start correctly... Think it has to do with the power supply

Similar Questions

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• my creative cloud is not getting updated. the update does not start yet. There has been 0% for the last 24 hours now

  my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours

  Hello

  Please follow the steps below and check it, if it helps:

  1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out

  2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  3-

  MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)

  Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  WINDOWS: C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

  4-

  MAC:  Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)

  Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY

  WINDOWS: see, turn the firewall on or off - Windows Windows help

  5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check

  Let us know if that helps.

  Kind regards

  Bani

• my adobe creative cloud does not start correctly, it appears a white screen in the

  the main screen and not the list of programs. is the second installation of this time in my computer because I restore it.  And I tried to install several times and sometimes it apears 206 error.

  my computer has windows 8

  Hi angelogiuseppe9,

  If you are getting blank screen after the launch of Creative Cloud Desktop app then delete opm.db should help. Please remove all content of this site.

  C:\Users\(your username) \AppData\Local\Adobe\OOBE

  If you found 206 error during installation then try changing the connection Wifi local network and vice cersa. Alternatively, you can try to disable your software firewall as appropriate.

  Please let us know if this helps

  Kind regards

  Abhijit

• After update Premiere Pro, when I try to run the application, I get this error message: "the Application could not start correctly (0xc0000142). Click OK to close the application.

  Need help with Premiere Pro, worked fine until I upgraded to running.

  Hey Kevin,

  Need help with Premiere Pro, worked fine until I upgraded to running.

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Cannot open mspaint "the application failed to start correctly (0xc0000005). Click OK to close the application. "

  Hello

  I get the following...

  "The application failed to start correctly (0xc0000005). Click OK to close the application. "

  Please help me with suggestions?

  Thank you

  Dimitri

  Hello

  Thanks for posting the question on Microsoft Community Forums. According to the description, you get an error message "', the application could not start correctly (0xc0000005)." Click OK to close the application"when you try to open Microsoft paint. We will analyze and identify the cause of the problem.

  1. are you aware of changes to the computer before the show?

  2. is it limited problem specifically with Microsoft Paint?

  I suggest you perform the steps:

  Method 1:

  Put the computer to boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.

  Method 2:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please respond with more information about the issue so that we can help you.

• Unable to open the program. I get this: lightroom.exe - application error: the application could not start corrrectly (0xc000007b). Click OK to close the application.

  Lightroom.exe - application error: "the application could not start correctly (0xc000007b). Click OK to close the application. »

  I use lightroom 5.

  Please see the troubleshooting link: Solutions for Photoshop Lightroom 0Xc000007b error

  Kind regards

  Mohit

• Mac does not start correctly

  Hello, my Imac does not start correctly. When he plays the macsound boots but only half of the load of the boot. Then it restarts.

  What I have done:

  (1) unplug everything and held the power button for 10 seconds.

  (2) held the shift key--> after that I have a few bluish vertical lines

  (3) held cmd + option + P + R-> after I have a few vertical lines bluish, but bigger

  (4) held the c key

  (5) very slow D

  (6) CMD + V-> it's fast to read and to search for errors

  After all these different things, randomly I these bluish vertical lines and sometimes a few flickers on my screen.

  Can someone help me?

  If I need to reinstall I can recover my data?

  I appreciate your help and thanks for your help.

  I solved the problem! I googled a lot and I found that it was the GPU was down. Well, I searched and found the solution...

  I think that apple don't want to hear or see. But if you are a little technical or handyman, Cook your GPU in the oven. Yes, bake your GPU in the oven! See the link: https://www.youtube.com/watch?v=9vPM41ZmLos

  I warn you all, be very patient and very carefully, or you can destroy your beloved mac. The case may go to an apple store workshop.

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• WAG300N: could not start correctly after power failure

  Hello

  After AC power interruption, I tried to turn on my router Linksys WAG300N, but he won't start properly. I will describe what it looks like and what I've tried:

  I push the power button / stop, all 4 Ethernet LED simultaneous light for about a second, (if there is LAN cable connected, one or more led lights permanently) and power the LED will blink twice at normal speed. After that, both voltage and wireless, led simultaneously for about 1-2 seconds, start power LED flashes quickly, after seconds wireless LED stop light, wireless flash LED again and stop two LEDs for lighting. Second later power LED flashes two times normal speed and the process begins again but without flashing of the LED Ethernet (loop).

  I tried to download the firmware using TFTP, but it does not work. Router did not respond to a ping. After many tests, I noticed that the only time where I can ping router is during normal those two blinks of the power led. I've got 11 times waiting and the response of 1 or 2<1ms, 11="" timeouts,="" 1="" -="" 2="" responses etc... (response="" waiting="" time="" for="" a="" ping="">

  I've tried a few ways to reset the router (based on this forum). It does not help, sometimes after the reset I power the router problems or flashing process stops after a few loops (only one Ethernet LED lightning or router turns off). At the end of a day all supports them to the previous behavior of closure with power LED and wireless LED blinking.

  In the end, I tried utility upgrade Sercomm 2.07 mentioned in this topic: http://forums.linksys.com/linksys/board/message?board.id=DSL&thread.id=52

  This software detects only router after reset, when the router is in unknown mode, Internet and power LED flashes alternately.

  Software detects the device as MAC address and visualize correctly the version of firmware loaded into memory. Looks like it works and flashing memory. While flashing memory, power LED, LED Internet and Ethernet LED flashing at the same time very fast. I tried all versions of firmware available, but it does not help, I still have the same behave after flash.

  I think it could be a problem with the bootloader, maybe that part of the memory is broken, but I did not how to fix it. I found information on the JTAG interface, but I don't know if it will work for router WAG300N and where I can find the appropriate file with bootloader.

  Maybe someone can help and give me the idea what should I / check. Theoretically, I should have left 1 year warranty, but I lost the proof of purchase required for the RMA process. I can't find the place in Poland where professionals can help me, so I think that should do it myself with your help

  I think that's the problem with the power adapter... You should try a different power of the specification of the same card...

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• Flow: Not started correctly

  My phone ran into a cycle and does not start. He goes along and always ends the automatic repair screen with the message "your PC is not started correctly.

  Hey @elmarcano,

  Before I provide documentation for troubleshooting that you can use, I would like to take a moment to welcome you to the HP support community!

  Note: Make sure that the AC adapter cable is not plugged into a power strip, surge arrester, or secondary power source. It should be directly into a wall outlet. Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  You have beep codes or flashing LEDs?

  If you have no flashing caps lock Num or Num Lock LED, how many times it flashes in each interval?

  Did you do a BIOS reset?

  Have you tried to do a hard reset?

  If the computer is turned on, you hear the fan running?

  If the computer is on, but the screen remains blank, please see computer starts up but screen remains blank.

  Do you have the recovery disks?

  You also mentioned that you see, "Your PC is not started correctly". You can try to repair your laptop by a refresh:

  • Click on Advanced Options
  • Click on solve problems
  • Click on reset this PC
  • Click on keep files

  Once done, please see if you can get into your operating system. If this isn't the case, you can only solve the problem by performing a recovery of the system, which can, unfortunately, erase your data. This YouTube video can show you the steps of troubleshooting involved.

  Please NOTE: you may lose your files on your laptop. The copy of files from command line option may not work for you when reloading the operating system.

  If you need assistance, I would be more than happy to help! Please let me know the detailed answers/results of troubleshooting above. If this answer resolvesyour issues, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution at the bottom of this post.

  To simply say thank you, please click the Thumbs up below!

  Thanks for joining the community of support HP!

  Have a great day!

• Acer Aspire XC605 Windows 8 in article 8.1; Does not start correctly?

  Hey

  I mailed my Acer Aspire XC605 yesterday and started using it today. I downloaded a bunch of updates and rebooted the system, after which I decided to update to 8.1 by the store.

  I restarted my computer once again and now it won't start; I get the Acer logo with loading below points, then a black screen with just the mouse cursor (sometimes not even). I tried to go into safe mode but F8 (or other suggested commands) do not work - I think that this is due to the computer from starting too quickly so that it can detect the command?

  Is there something I could do to undo the changes or solve the problem (I don't even have disks or something to undo changes for and I don't know anyone with a Windows 8 Working Group) or should I have someone (Acer or a store TI) do a clean install of Windows 8 (or some IT magic on it)? As the computer came with Windows 8 I don't have the disk to install it.

  Hi Stellaluna

  You restart your PC, hold down ALT & continually tap F10 - this should take your PC using the eRecovery. He then will allow you to reinstall Windows 8 of your recovery partition.

  As soon as you're back up & running, burn your recovery discs - you'll need these if the hard drive do not ever!

  And keep out of Windows 8.1, (at least for now).  Microsoft has made some changes, which means that it is not compatible with all devices.

  I hope this helps!