HP c410: hp c410 printer and router netgear wnr 2500 wifi

Similar Questions

• Get a connection between the printer and router wireless

  I have a printer e-all-in-one HP Officejet 4630 I am trying to install wireless.

  I got when I first installed the printer a few months ago, but have since had to change my password for network security and am now unable to get the printer to accept/meet the new password.

  I downloaded and followed the instructions provided by the tool for troubleshooting HP, without success. I have a DLINK wireless router and use windows 7. Would appreciate assistance.

  Easy things first.  Reset the printer to the factory settings and try to connect again using the Setup Wizard of the façade.  If no joy, temporarily remove the password for the security of the router and try to connect.  If so, go back and add your password.  If no joy, reset the router is by default and reconfigure return, and try again.  Blue wireless light should be lit when connected.

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Premium Fax e-All-In-One c410: Premium Fax e-All-In-One c410 printing, copying and scanning problems

  My c410 HP Premium Fax e-all-in-one won't copy (white spell page), only prints in faded gray even when the quality is set to 'best', will only print up and part side of page - excludes the middle of the page and analyze only a portion of the document.  A new black ink cartridge has been installed in a couple of weeks.  Supply levels say the black is full, all the color is 3/4 full and the photo ink is full.  The printer has been idle for a few weeks - I had to restart it returning to work, because he wouldn't (and is often not) respond to print requests.

  Hi @14141,

  I see by your post that the copies are to come in white and black is printing in grayscale. I will definitely do my best to help you.

  Please, try the steps outlined in these documents to see if she will help solve this problem. Do not take into account securities.

  Problems print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e).

  An "Incompatible cartridge ' or 'Ink cartridge problem' message for HP Photosmart Premium Fax e-All-in-One Printer Series (C410)."

  Inkjet printers from HP - "Ox."... «or «C2...» "Error code appears.

  I have also provided a few steps to troubleshoot issues when you try to print from the Mac.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +.

  Then click the Add button.

  You use genuine HP cartridges?
  What are the ink levels?

  Let me know the results of the Diagnostic print quality report?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• I have a printer HP 3050 J610 and a router netgear, how to make them together

  I have a printer HP 3050 J610 and a Netgear router. I have a MacBook Pro that the operating system will not work with the set up CD.

  HI mabookrobin,

  Welcome to the HP forum!

  Thanks for your post, I am happy to be of assistance.

  I understand that the installation disc you have does not support your operating system. You can download the software and the driver for HP Deskjet 3050 all-in-One Printer - J610a drivers. Full feature software and drivers are available for 10, 5-10, 8 and instructions for installation on 10.9 v10.9 OS X Mavericks: installing and using the printer on a Mac.

• C410 printer - cannot install

  Photosmart Preium C410 Fax e-All-In-One Printer

  Dell laptop running Windows 8.1

  Have had many problems with Windows 8 and 8.1. Geek Squad had to reload Windows 8 several times. Each time that the printer does not print nor UBS, or wireless. Have found the best way to fix is to remove the printer and re - install. After the last issue of Windows 8, I removed the printer and put in the installation CD. The normal boot menu "Select to start to install your new HP device" came, but the only option is an EXIT button. I missed installs? No idea what to do next?

  Thank you! -al410

  Hello alc410and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having installation problems.  I would like to help!

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• C410 all-in-one: C410 printer will not print, scan or fax

  Printer worked OK as connected wireless device.

  Had to change router broadband BT (simple job) on PCs and phones simply connected again AP and work.

  The PRINTER went into the menu printer > network settings > used the... secure configuration button enabled on the router and the printer advises connection very well and show the maximum signal strength.

  Trying to print and it shows disconnected...

  Used HP Solution Center - shows disconnected

  Used HP print & scan doctor... He concludes printer right way... but don't connect advises there lack of software.

  I click to install missing software - it embeds a Panel (it looks like the original install CD) but the justifications not continue with anything so not sure what to do, there is no button fix.,.

  I select USB wireless, thought option that can make it work again... taken in a USB first - after about 10 minutes of him do in step 6/8 then advises cannot connect.

  It should have been really simple - printer connects to the new WiFi and it should be.

  Anyone no matter what suggestions - or is this yet another abduction all the and reinstall.

  After hours of fun trying to operate, including the page after the help page

  Followed by HP Center diagnoses and the stand-alone HP print & scan doctor - even removed all printers PC... not good.

  Software HP saw printer, but told me that he couldn't communicate!

  I didn't change the WiFi router... on other WiFi devices, just selected new AP and they worked... HP seem to make life very difficult on WiFi.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• 8610 printer: printer 8610 kills modem and router

  My 8610 printer is connected to my wireless network.  Whenever I turn it on it kills my connection by modem TECHNICOLOR tc8305c voice and data.  I lose wifi and my phone lines shut down.   I can get them back through the support of Comcast to reset the modem or usually pressing the reset on the back of the modem.  Any ideas how to solve this problem?

  Yes.  That is why buy a router of high quality that YOU have full control over.  If you have a phone from Comcast, Devil buy your own modem also and save 10 $par month rental.

• HP DeskJet 3050 a"the printer and the computer are connected to different routers"

  I am trying to configure my J611 all-in-one HP DeskJet 3050 again on my wireless network and this is the message I get "the printer and the computer are connected to different routers" but I only have one router! (Netgear WNDR3400).  My operating system is Windows 7.  What I am doing wrong?

  Yes, you have a router, but there two (technically three) networks.  I guess that is your printer or your computer is connected to the Guest network.  Check that your PC is not on the network of comments.

• Router Netgear does not recognize the HP Photosmart 8750 (wired connection)

  My Netgear WNDR3300 router seems to block my ethernet connected the HP Photosmart 8750 printer. The printer does not appear in the list of the router of connected devices and network printing shows that the network status is offline.

  How can I get the printer and the router to talk to each other?

  Also, I checked the cable and tried to use a different port on the router; no change.

  Found the problem...

  I shined a flashlight in ethernet printer ports and found two sons/connections are folded. :-(

  If all goes well, not too expensive to fix.

• HP Deskjet 8500 has all-in-one: printer printing and scanning in black

  Printed OK yesterday. Today it is printing full black pages, on black settings and color.  Also the complete black page scan.  Has been at rest - not off.

  Hello!
  Welcome to the HP community @ebe7fos,

  I read on how your prints and scans are now completely black when you use your Officejet 8500 printer and wanted to drop to help. Try the steps and answer all the following questions please and responds with the result, and we can go from there if necessary.

  Reset the printer and make sure it is plugged directly into a wall jack, avoiding the power and surge protectors toolbars:

  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  1. How the printer is connected (USB / wireless / wired / Bluetooth)?
  2. Did you test functionality of the hardware (made copies) and they work successfully?
  3. Have you tried printing from different programs?
  4. Have you tried to uninstall and reinstall the software?
  5. Run the print and Scan Doctor and understand the results.
  6. Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  7. Have you tried using a different USB/Ethernet cable?
  8. You see messages of error codes and if so, what they say and where do you see them?

  If you have trouble, let me know and I'll do my best to help.
  
  Click on the "accept as Solution" If the issue has reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!
  
  We wish you a wonderful day

• problem w / Airport Extreme base station and modem Netgear broadband

  I just changed to ATT Uverse to Time Warner - internet only.  With Uverse, I was using my Airport Extreme base station to create a wireless network, and it has worked well in this capacity.  When you switch to TWC, the tech got the modem (TWC allows you to buy your own modem, so I bought a Netgear CM600 a recommended model) enabled and works very well, but could not get the Airport base station to talk about her (yellow light blink on the base station).  So, he opted for a TWC wireless modem/router.  Interestingly, I found that I could plug the Airport base station in the TWC modem (without any reconfiguration, just plugged into the WAN port base station to the modem ethernet port, as I had had with Uverse equipment) and voila!  It worked immediately.

  So, I called TWC to retry my Netgear modem.  I have the base station power off, plugged on the ethenet port Netgear, put back under tension and just got the blinking light.  I know that the modem does not work, because my iMac's network to the internet through the base station, for the Netgear, and go outside and I can fine surf in this way.  So it is something in the wireless configuration that must be different between the TWC modem and the Netgear modem.

  Obviously, I'm not an expert at this, basic troubleshooting tips would be appreciated.  The base station functions as a router (I can connect through a port ethernet through it), it is simply not generate a WiFi network for me...

  Thanks for the tips

  Steve

  Carlsbad, CA

  So, he opted for a TWC wireless modem/router.  Interestingly, I found that I could plug the Airport base station in the TWC modem (without any reconfiguration, just plugged into the WAN port base station to the modem ethernet port, as I had had with Uverse equipment) and voila!  It worked immediately.

  If your AirPort Extreme has been in its original configuration, it would act as a wireless Internet router. If you connect another router upstream to the extreme, there is work, but you'll have a condition known as: Double NAT. This isn't necessarily bad, but should be avoided if possible. To do this is simply to reconfigure the downstream router (in this case, the extreme) under a bridge. This disable its functions of routing and remove the error condition.

  However, if your extreme base station has been reconfigured as a bridge, if connect you directly to a simple modem, like the Netgear CM600, then this configuration will not work because no device will provide the necessary routing functions.

  It's always a good idea to perform a full power recycle your network hardware during change of equipment. Maybe that's the only thing your missed when you design your own? If you haven't done so already, please give it a try with the CM600 & Extreme combo. After return your results.

• HP 550-015 a DNX DT desktop: Ethernet connection for HP 550-015 has a router Netgear Wireless D6300 desktop PC.

  I have connected an ethernet cable from my router Netgear, D6300 wireless, to my DT DNX 550-015 a newly purchased HP desktop computer and I can't get the connection work with internet access.

  When I look at the State of the network and its connections, I find that the Ethernet connection is a "unidentified public"network"and that there is" "no access to the network.

  If I make the same connection to the Netgear router to my OLD HP laptop Pavilion I immediately have an ethernet internet access.

  Why I can't access ethernet Internet on m y new desktop computer.

  Daggles

  Hi @Daggles,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the wired network connection. I'll be happy to help you.

  Please follow the steps in Troubleshooting Wired Home networks (Windows 10).

  Please let me know if this information is useful to solve the problem by marking this message as 'Accept as Solution', this will help others find information easily.

• ORBI replace DSL Modem and router Nighthawk?

  I have a Nighthawk AC1900 R7000 router and a Netgear DM111PSPv2 Modem and I was wondering if the system ORBI would replace both of them and give me greater coverage. Anyone?

  Thanks for the reply. Think I'll stick to what I have.