HP C4100 Photosmart Premium: HP Photosmart C4100 Premium - "Please put your printer market."

All lights on the printer are flashing and screen says "Turn your printer and turn it on again" so I do that and it goes right back to Flash. It does not at all.

I turned it off and then ungplugged the back of the printer and expected 60 seconds and has not fix.

Any ideas as to what could happen and how to fix it?

Hi TeamPas,

There is a document that describes your problem and ways to solve the issue: http://support.hp.com/us-en/product/hp-photosmart-c4100-all-in-one-printer-series/1142450/document/c01369982/

A couple of things to try that you have not mentioned below are to disconnect the USB cable, reset the printer and try the different points of sale and directly into the wall outlet.

If these steps do not recover the printer you can try to replace the power module.

How long have you had the printer?  If it is still under warranty I recommend contacting HP customer support if the steps in the document do not resolve the problem.

Jean

Tags: HP Printers

Similar Questions

  • HP Photosmart Premium C309g do not print black ink

    Hello

    My HP Photosmart Premium C309g (CD055A) will not print black ink even if the cartridge is full. He's going through the motions of printing but the pages come out blank. It prints colors, they are not as dark as before, so I know that black is not working. I have cleaned the print heads, turned off the printer, unplug the printer, restarted the computer, but nothing works. I get colors on the report of the print quality, but the printer status report comes out blank. I bought a new black ink cartridge (564XL) think the previous one was defective (levels showed a 75% ink) but I still have the same problem. Any suggestion would be appreciated. Thank you.

    Hey,.

    I see you have done some troubleshooting on the issue of the print quality that you are experiencing.  I would make sure you did all the troubleshooting steps available for your research problem in the document following the link.

    Print colors are the colors should not when the C309 Photosmart Premium printing.

    If you have completed all these steps, then I check the status of your printer warranty.  If it is out of warranty, you should consider the solution provided by Bob_Headrick in the thread found here.

    Hope this helps,

    Jason

  • HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

    dose

    All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

    Hello

    Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

    Good luck!

    http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.

  • Photosmart Premium c309a series - will print but scanning and fax are not in printers and Fax preferences

    Any expert out there?

    I already posted this problem.  I deleted Photosmart Premium C309a [OEFC74} of the preference of the "Print and Fax" system on my desktop Mac running OS 10.6.8.]  I deleted it to correct a mistake, "Printer offline", when the printer was offline but would not.

    I then added in Photosmart Premium C309a as instructed.  He has fixed the "printer offline" problem, but now the scanner icon disappeared from "Print & Fax" and I cannot scan documents.  I've always had to scan from my computer, not the printer itself, but I've lost this ability.

    Before deleting the printer in the printer list, I had two icons of the printer: Photosmart C309a series [OEFC74} and Photosmart C309a [192.168.1.5.]] (Fax) listed.  Now, I have one with a different designation, simply Photosmart C309a series.  I had to spend two laptops to this designation of printer in order to print using these laptops (all Macs).

    The all-in-one printer is connected wireless via a home network using a wireless router.

    HOW to bring back the ability to scan?  I spent hours on this forum without finding a solution.

    Thanks for any help.

    Radio of your printer may have indeed failed, and it is not uncommon with this model.

    Try to reset it to put off the printer, then hold him down # and 6 keys while and for a few seconds after I turn it back on.  If the radio is just when, this should fix it.  If she suffered a hardware failure (such as a circuit board) cracked, this will not fix it.

    With this model, you can also connect it to your router with an Ethernet cable and have the same functionality available for all devices, including those who have connections to your router wireless.

  • 'ink system failure' error with code oxc19e0023 on a HP Photosmart Premium all-in-One Printer - C309

    'ink system failure' error with code oxc19e0023 on have a HP Photosmart Premium all-in - One Printer - C309g - did all resets and reinstall the ink also tried to replace ink with new carts HP... frustrated please help

    Have you tried the steps outlined in this article:
    http://support.HP.com/us-en/document/c03081973

    If not try the steps and tell us if it helps.

    Good luck!

  • Problem with the installation of the solution Center for a HP Photosmart Premium all-in-one printer - C309g

    Hi people,

    I searched many threads and found some tips to remedy this, tried and had no chance.

    I am running Windows 7.  All updates are underway.  When I bought the printer, I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center has stopped working.

    Uninstalled all HP software to reinstall.  I could only reinstall HP Update.  I was able to load the basic print and scan drivers, but not following any software, including solutions Center.  Installation stops abruptly after "install updates".

    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.

    What can I do with my printer (HP Photosmart Premium all-in-One Printer - C309g)?

    Thank you

    Alex

     

    Screenshot of the update section:

  • Photosmart Premium c310 will not print from the photo tray. Market power does not work.

    HP Photosmart Premium c310 refuses to print from the photo tray.  I use an iMac.  I shot tray in and out, nothing.  I stoked market, nothing.  Whenever I try to print a photo, it pulls the main tray.  He doesn't even try to pull the photo tray.  And I select in the settings of Photo paper in the photo tray.  Oh, and I have never tried to print before photos.  This is my first time and it won't work.  Printing regular documents from the main tray works fine.   Can someone please help?

    Are you printing from iPhoto?  If so (and this may apply to other applications), you must specify the format and print size.  Make it look like this:

  • HP Photosmart Premium C309g suddenly stops printing wireless

    I recently bought this printer. I've set up to print wireless. I installed and uninstalled twice b/c after about three times wireless printing, it stops wireless printing. Here is the order of events.

    (1) install the software according to the instructions

    (2) test page wireless printing, that always works

    (3) other printing things the same day wireless (works fine)

    (4) try to print something wireless as 2-3 days later

    (5) it does not. Get message of the staing HP Solution Center which is obvious: Document cannot print (duh). Through troubleshooting (Windows help). It tells me to make sure that it is the default printer (it is) and then check if it is online. It is usually not. So I choose to do the printer online (which is a sub-question, and I'm sure is related to the problem, why it keeps automatically be disconnected?)

    (6) attempt to print

    (7) message appears saying that HP Photosmart C309g-m offline (Solution Center)

    (8) read troubleshooting tips (HP Solution Center), which tells me to connect via USB to print (which annoys me because there is no available solution that tells you how to restore a wireless communication between the router/computer/printer)

    (9) which I did the first time around, but find that when I connect using the USB, it prints well. Any attempt to return to wireless printing is reflected in steps 7 and 8

    (10) check the connection of the application printer wireless network printing. Indicates that the printer is properly connected wireless. I know that my laptop is on the same network b/c that's the only one I have and my internet connection is not interrupted somehow.

    (11) get frustrated, uninstall and reinstall the printer

    Repeat step 2.

    This has happened twice already, and I bought it so that I COULD print wireless. He must be troublemaker solution Quen uninstall then reinstall the printer each time that happens (up to once a week).

    I have a laptop computer, a printer and a wireless router.

    have a Belkin g MIMO Wireless router

    I own a Dell Inspiron 1520 laptop

    I have a HP Photosmart Premium C309g (bought less than 2 weeks ago)

    I do not turn off the router or printer. Rarely I have turn off the laptop. Reset the router in the past has not helped. Turning and on the printer or the laptop in the past has not helped.

    Issues related to the:

    (1) how to prevent printing to offline on my laptop

    (2) how to restore communiucation between the printer and the laptop computer on the wireless network?

    (3) how do I keep the communication between the computer laptop and printer (and I assume that the router) to go Bye Bye?

    Thank you

    Kenya

    About what you suggest, the IP address remained the same throughout the facilities and absorption.

    However, I have thought of it. I guess that the wireless connection on the printer. I went back to the office and looked at my network settings. I needed to "find" my wireless signal. The first time that I've refreshed my wireless name does not show upward. I refreshed again and POOF! He was there! So I chose and put in my password (I think that his WPA encryption). When he finished the wireless network connection, it is printed on a network status page. Given that I printed this page so many times already I happened to have an old on my desk. I noticed that the IP address is the same (although today, I uninstalled and reinstalled again) on both forms. Anyway, when I returned to my computer (which is in my living room) HP Help Center had a giant green check mark on it and said that the printer is connected. Then I printed something and it worked! YAY! It would be great if HP put in information on the way to reconnect wireless when you get this message "the printer is not connected. Who knows maybe I needed to evacuate to understand! Laughing out loud

    So for everyone out there, if this happens to you:

    1) go to your printer

    (2) select the arrow to see the next menu. (it should be on the right side of the LCD screen, it looks like a triangle on the side)

    (3) select Setup--> network--> network wireless assistant

    (4) the printer will start to search for wireless networks

    (5) choose your network (or the network you are using...  It should be the same as your computer/laptop is on)

    (6) if it is password protected, enter the password/password

    (7) your printer will print a network status page.

    (8) your computer should "recognize" the printer on the network itself. Your HP help window can display a large green check mark (it's a good thing!)

    (9) print what you want!

    * Note I guess that you may need to do this each time the printer goes into sleep mode. Its not that boring!

    -Kenya

  • Photosmart premium 309g will not print Yellow, cyan or photo black

    We have premium photosmart hp 309g.  I replaced the ink cartridges and it still won't print black, cyan or yellow.  I used all the 'tools' on the printer and nothing has helped.  Any ideas?

    What happens if you try to make a copy of a picture of the printer - still no printed colors? If print colors by making a copy, then the problem is on the side of the computer. If this isn't the case, it's a matter of hardware/firmware/printer accessories.

    If you determine that the problem is the printer, see below.

    Since you have replaced the cartridges, you may have a printhead problem; Sales/dirty or defective.

    Follow the steps in this document to begin troubleshooting your print head (ignore the title): 'print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer

    Please post your results after going through this troubleshooting.

    Thank you!

  • "HP Photosmart all in one single 7510: print greeting cards 5.5x10" on hp photosmart 7510

    "Unable to understand the print size of greeting card size full page stock measure 5.5x10.

    Hi @artdahlink,

    Thank you for joining the Forums of HP Support!

    I noticed that you are unable to print a 5.5 x 10 greeting cards on your HP Photosmart 7510 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand the frustration you feel. Please see the Specifications of printer for HP Photosmart 7510 e-all-in-one printer series.

    Maps:
    Card type / size chart

    • 3 x 5 Index / 76.2 x 127 mm (3 x 5 in)
    • 4 x 6 inch Index / 101.6 x 152 mm (4 x 6)
    • 5 x 8 Index / 127 x 203.2 mm (5 x 8 in)

    NOTE: According to the specifications, this printer does not accept a 5.5 x 10 (cards).

    There is no guarantee the implementation of a custom paper size to work, however, you can try this method

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

    I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

    Hello

    Mine is about 45 degrees, sufficient space to install the ink cartridges.

    Kind regards.

  • HP Photosmart Wireless e-All-in-One Printer series - B110

    Hello

    I have the above printer and I m finding difficulty in ordering ink cartridges.

    The available cartridges are:

    HP Photosmart Wireless e-All-in-One Printer series - B110a

    HP Photosmart Wireless e-All-in-One Printer series - B110b

    HP Photosmart Wireless e-All-in-One Printer series - B110c

    HP Photosmart Wireless e-All-in-One Printer series - B110d

    HP Photosmart Wireless e-All-in-One Printer series - B110e

    I don't know the one to choose. Can someone help me choose the right cartridge please.

    Thank you

    Presho

    In the United Kingdom, the cartridges would be 364 series.  You can order black, cyan, magenta, yellow or pack combo with three cartridges.  The cartridge photo and four packs of color with the photo cartridge are not applicable for your printer.

    You can also use the XL 364 cartridges, they have more ink at a higher price, but at a lower cost per page.

  • Photosmart eStation C510: I have a Photosmart eStation C510 series with a print head problemo

    Error message indicates that there is an unknown problem with the print head.  When I went to the customer support told me that this model is no longer one of HP services

    Welcome to the community @mickster71 HP

    I wanted to reach out to the issue you are having with the print head on your printer Photosmart C510. See the link below to see if these measures can help the issue. If this isn't the case, then looking at needing a new printer. You can call the phone support to see what are your activities in the options if this happens.

    'Ink system failure' or "0 x... "Error code is displayed

    Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

    Contact HP:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

  • HP Photosmart 7520E-all-in-one: black prints fine for text but the black areas in photos come out green

    Black ink works very well for text and text with little color, but when you print photos (on HP Advanced paper which is recommended), printed black areas aqua green, or deep.  Other colors are fine.  How can I fix it?

    The probable cause is a cartrdige Photo print does not correctly.  In the paper here troubleshooting steps can help solve black photo print does not correctly on your printer Photosmart 7520.  The Photo cartridge is on the far left of the printer.

  • changed router photosmart b110 e-all-in-one printer does not work

    changed router photosmart b110 e-all-in-one printer does not work

    Hi aged60,

    I'm sorry to hear that you have linking problems with your Photosmart B110 printer.

    I've included a link to HP Wireless Printing Center Troubleshooting web page.  In the section entitled "your printer was working on the network before and now is not" there are clear instructions to follow when your router has been changed or updated.  If you follow the instructions you should be able to communicate with your printer.

    HP wireless printing Center - Troubleshooting

    http://www.HP.com/global/us/en/wireless/troubleshooting.html

Maybe you are looking for

  • Satellite P200 purchased in Australia lost recovery DVDs

    I bought a computer laptop Satellite P200, Vista Home 32 bit, during a trip to Australia, in all my travels, I managed to lose my recovery DVD and now home to the United Kingdom, I need to run recovery due to corrupted Windows system files. When I tr

  • HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

    Hello I upgraded Windows 8.1 to Windows 10 yesterday. Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop. When I select the Windows key + P I get the message error "your PC can't proje

  • Activate Windows XP after the replaced the motherboard

    After changing motherboard to VIIPCTRADE PTE Ltd. The notification area invite me to activate the window after I'm entered in the window at home. VIIPCTRADE PTE LTD staff advise me to refer to microsoft support after giving them a call. I met a blue

  • DRC for multiple computers...

    Hi everyone; Long time reader first time poster... I've recently stepped into a new role of the network Admin where we have a mixed eco system of Windows and Mac, all running on a network based on windows that we look on ~ 300 customers worldwide, an

  • Copying files between hard drives problem

    Hello I have problems copying files between hard drives on my computer. I was having this problem on Windows 7 and Windows Vista, but never met him on XP.  It seems that there are several similar topics, but I think I've noticed a few oddities in my