HP C51880 printer: printer HP C5180

Similar Questions

• How to fix color on skin tones in a printer Photosmart c5180 on Windows 7?

  Good afternoon

  I use some time a Photosmart C5180 printer to print on A4 sheets, capture some of my Nikon D90 photos.

  If the prints generally show a reasonable quality, I was quite wrong with color moving in much darker tones of skin that appear more pink and against nature.

  Does anyone have the same experience or know how to solve the problem?

  Thank you

  It does not help.  As the calibration option is not there, it may be because you have the version of Solution Center does not offer this option.  If I remember correctly, it was deleted in the later version because it has been incorporated in the own options or alignment.  I think that the problem is in the print or color management driver in the computer.  The only option to tailor color management is in the printer printing preferences.

  1. Click on the start menu.
  2. Click devices and printers.
  3. Right click on printing preferences.
  4. Click the Advanced tab.
  5. Change the setting of the HP real life technology.  If it is check, uncheck and visa versa.
  6. Try to print the photo again.

  If changing the color management setting does not resolve the problem, then follow the document below to assign the printer to use a different printer driver.  I recommend the 990c Deskjet.

  http://support.HP.com/us-en/document/c01796821

  Let me know what happens.

• Ink taking C5180

  I have always used HP printers, but my last printer Photosmart C5180 all-in-one gives me problems especially if the printed page is wet. I noticed that a drop of liquid causes printing ink on paper fades and short. Makes bad when you print a map and walk in the rain just not be somewhat readable. It uses the HP 02 ink cartridge, which is what I use in my printer is HP products. Anyone know a stop to this or preventing the ink actually turn liquid and nose that flows when it is wet? Help, please!

  dontknowwho wrote:
  [snip] I use the photo sheet all the time, but it's always a problem with taking them with ink. [snip] How can I replace HP 02 ink with a new brand of ink? How can I solve it? Thank you.

  HP Advanced Photo paper offers prints with HP Vivera 02 ink water resistant.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Photosmart c5180

  I need help I have a printer photosmart c5180 who had a problem with a broken fiber but after fixing his request now 363 ink while it came with ink 02

  so I need help so that I can solve the problem, I need to use 02b ' is it's the only one I have

  Help, please

  afmuks,

  Photosmart C5180 must always use 02 cartridges, we use HP sure supply for reference.  Could I get more details on the situation?  A fiber broken band of coding?  The printer may just need a reset.

• Photosmart all in one C5180

  My printer displays error message: 0xc18a0101

  Ink system failure. Can't seem to solve this problem. Any ideas? Thank you

  Easy to fix (in many cases) and saves a lot of waste!

  According to the local printer repair shop, it suits more often (I'm not sure why HP did post):

  Printer HP C5180 all-in-One HARD RESET:

  1. Hold down HELP + OK button and unplug the printer (could experiment with the regular force, but I opted for the brute force)
  2. Hold down HELP + OK button again once you plug the printer back in. Then he put it on, if it is not running automatically. Be safe: hold the buttons until the printer turns off. (It took mine less than a minute.)
  3. Now you can release the keys and just the power back on. (I was holding my breath, but is not required).
     • I received an error message "stop a bad" since I unplugged it w / power off. After I clicked "OK", the printer was fine and didn't mind more. And now I can print.

• How to find capabilities of scanning with C5180 all in one with Windows Vista? CC = en

  I can print with C5180.  I can't scan.  When I go to programs on my Windows Vista computer, I can see is no longer my unit indicated.  I tried to reinstall the disc that came with the device.  Install doesn't work.

  Hello RDB49 and kethyinmo

  Try the following procedure. It will remove the HP software and software that can cause problems. Please let me know if any of you have problems.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer

• Installation of KB 2463332 custody failed, error 42 b. 'unknown error '! How to solve this?

  Today began to have trouble with newly purchased Excel 2010,... When save a worksheet Excel stops and closes its doors.

  Technician "remote access" Microsoft says prob is caused by my printer (HP C5180, bought in 2007) and download the latest version of the driver.
  After doing that I still have the problem.

  But if I change the default printer to something else, Excel works fine.

  But Microsoft Update says I need the Service Pack 4 (for Microsoft SQL Server 2005 Express Edition): KB2463332.

  I don't know if this pack is essential for my problem with Excel, but I tried several times to download and install, but the installation always "fails".

  I use Vista. He was always very well. I don't know exactly where is the problem.

  (Do I really need a new printer? It works very well!)

  Hello

   
  Method 1: try to reset the Windows update components and check if you can install the update.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058 
   
  Method 2: Download the stand-alone pack update from the Microsoft Download Center, put the computer to boot, and then install the downloaded update.
   
  Download the update here: http://www.microsoft.com/download/en/details.aspx?id=7218
   
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Can not install HPC5180 on mac

  I have just the latest driver for HP photosmart printer HP C5180. The scanner is not visible on my mac with os x 10.9.2. I tried all the options that HP suggest, but I don't see any options to the parser. It will print normally.

  Downloaded the soft ware HP corectly? It seemed a very fast down load other options?

  Rugbypete

  Hello

  Don't forget to run the software update as described in the following document, and then scan using picture Capture or preview:

  http://support.HP.com/us-en/document/c03967506

  Available HP download is a patch, the drivers are automatically installed via Apple Software Update and not a downloadable software.

  If you are having any problem getting pilots or sweeping, rebooti your Mac and try again, if it still does not help install the package according to Apple:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDriver2.16.1.dmg

  Shlomi

• Failed to load HPscanner software for computer.

  Try to load the printer HP C5180 software but the message that I'm not at the level administrator, even though I am.

  Download/register the software of the printer on the desktop > right click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• How do scan you a document from the printer to the computer using a c5180 all-in-one printer

  I try to scan a document to my HP Photosmart C5180 All In One Printer to my computer and like to know what are the steps to do

  Use the HP Solution Center to scan at the printer to the computer.

  HP this documentexplains how to scan with the HP Solution Center. It is very simple to install and use. Mine is configured as a network printer connected to my Linksys router wireless.

• Photosmart C5180 - printing stops when the any ink cartridges run dry - what is happening with this?

  My C5180 does not print anything, apparently because the cartridge Light Magenta Ink. I have given levels of gray, black ink only, but it persists in telling me to replace the color cartridge. Can it be good? Is it really necessary to buy a new cartridge in order to use the printer printing black ink?

  Thank you.

  Insert the printer installation CD in your cd and cancel any window of installation. then type "X:\util\ccc\uninstall_L2.bat" in the run window (replace "X" with the drive letter of the CD drive the CD instalalion is located in..). you will get a black command prompt window that will feature instructions. Follow the instructions carefully. Once installation is complete, it can ask you to reboot, then do it.
  
  then start the installation once more. 's done it, you shouldn't face this problem.

• Photosmart all in one C5180 will print not black, computer laptop satellite L775D-S7132, Windows 7

  Photosmart C5180 all-in-one

  New ink installed all the cartridges.

  Printer does not print black.

  What should we do?

  There is a document with steps to help solve when there is a print quality problem in a Photosmart C5180. The document can be accessed here.

• HP C5180: Printer color problems

  I have a HP C5180 printer and printing color is messed up. My black watch diagnosis page than black, yellow-green with yellow strips, Lt Cyan shows as a dark cyan, cyan is white, Lt Magenta is dark blue, Magenta is Lt. blue. Anyone know how to fix this... I changed the printer cartirdges... the same problem. I cleaned the print heads. several times and followed the suggestions on the tech support pages. I would not only use this printer as a black and white printer.

  Hey @TomTwist,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve print quality problems you are having with your HP Photosmart C5180 all-in-One Printer. Because you have already replaced the ink cartridges and clean the printhead several times nothing is done, there is a good chance to have a defective print head. The print head is what reads the cartridge and puts ink on the page. On your print head template system is a non-replaceable part. Therefore, should that do not pass part a replacement of the entire unit would be necessary. However, I would like to go through the following steps to conveniently solve this problem of quality.

  I won't make you run any printhead more clean. The rule is usually 2 or 3 clean makes no difference at all, don't make a fourth because when you clean the printhead system it uses ink in order to rinse the ink system. If 2 or 3 clean make no difference that you're just wasting if you run a clean more.

  Step 1: Calibrate the colors:

  1. open the printer Toolbox: HP Solution Center. This should be on the desktop of your computer.

  2. If you have more than one printer installed, be sure to select the correct printer tab in the HP Solution Center

  3. click on settings

  4. click on print settings.

  5. click on printer Toolbox.

  6. on the device Services tab, click color to calibrate, and then follow the instructions on the screen. The procedure takes about two minutes and requires two sheets of paper.

  Source: The printed colors are not colors should

  If the problem persists, please continue to the next step.

  Step 2: Align the print head:

  1. click on HP Solution Center's on your desktop

  2. click on settings.

  3. click on print settings

  4. click on printer Toolbox.

  5. on the tab Services of device the printer, Toolbox, click align the print cartridges, and then follow the instructions on the screen.

  Source: Streaks or lines in the printed Image

  Please test print once these two steps have been taken. If the issue of quality still persists, because you have already replaced your cartridges the next step would be a replacement of the entire unit.

  If you want to explore additional options available for your printer, I suggest you contact the Technical Support queue by phone.

  HP Technical Support can be reached at the: 1800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  Good luck!

• HP Photosmart C5180 printer range: computer says it is printing, but will not be printed

  My printer was working fine until yesterday. The display shows 'printing', but nothing happens. I tried to turn it works, made sure I've had connections in place and give him a rest from one day to the next, but she still does not print. Thank you for your suggestions you have!

  Welcome to the HP community @fondyia,

  I read on how your Photosmart C5180 is no longer printing from your PC running Windows 10, and I want to help you get this resolved!

  I suggest first trying the steps described in this guide:

  • HP printers - printer 'offline' status message (Windows 10)

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  When you are finished, please let me know the result. If there are printing problems that are still visible, try to make a copy of the printer and tell me what's happening! If you see errors, made me know what they say, if you please!

  (Please try to print from more than one program on your PC)

  If one of my suggestions, helped to reach a solution, I ask you to click on the button "Accept as Solution" please and thank you!

  If you want to send me a 'thanks' for my answer to help today, click on the thumb to the top slot

  

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!