HP Color LaserJet 5550hdn: hp laserjet 5550 use only black print [new]

Similar Questions

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• I have a hp color laserjet 2840, I can't print with my Dell pc windows7

  I have a hp color laserjet 2840, I can't print with my pc dell with windows 7. Please help me. Thank you

  badedo,

  This laser model was for XP. There is limited support driver for WIN7.

  Just click on the link, select either the WIN7 32-bit or 64-bit and read the support documents to understand how to install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=445197&lang=en&cc=CA&prodTypeId=18972&prodSeriesId=445194&TaskID=135

• Photosmart 7510 - I want to use only black ink since I don't have all the need for a color.

  Photosmart 7510 - I want to use only black ink since I mainly use this for work and don't have all the need for a color. If I have more ink, can I just replace the black and it still work? Thank you very much for any information you may have!

  Hello

  I did a few test last year, you can print black only master always need color ink for the printer. Black setting only as a default printer will only print black and it consumes a little over heating of the process color inks. In short, it will not be printed correctly when run out of color ink (s) or does not start at all.

  Kind regards.

• How to use only black ink on the Canon print app?

  I wonder if you can use only black ink with the soft print Canon. I have a Pixma MX420 and we do not buy ink color so if I print a document from the application, all in colour will not be displayed. I'd rather he appear in black and then not at all.

  Hello.

  Printing options are limited to mobile devices.  In order to take full advantage of printing and scanning capabilities, you would have to print from a compatible computer, Windows or Mac OS x using the real drivers.

  It has not responded to your question or problem? Find more help contact us.

• Color LaserJet Pro CM1415fn MFP - professional printer with just a feeder?

  I'm confused. He is a professional office color printer - which means that a number of print media will be used to print on a daily basis.

  And after buying this printer at Amazon, I discovered that there not a manual feed tray and one paper tray.

  I have print of legal documents - copy desk in our records, on cheap paper, a paper of good quality to the client and an envelope.

  So I have to print a simple letter to remove and replace the Board THREE TIMES. This is not good.

  My simple Canon printer internal, or any other printer I've seen ALL have manual power option.

  QUESTION: could you please let me know if there is an attachment to this printer that would allow me to print manually, or should I send the printer to the shop?

  Hi GarryStotel,

  No, this printer does not have an add on the extra add envelope feeder on the plates as accessories. Looks like you need a little higher level printer as one of the following units (color HP LaserJet Pro 300 M375nw MFP color HP LaserJet Pro 400 M451dn printer) I included a link to your review these printers below.

  http://shopping.HP.com/en_US/Home-Office/-/products/printers/printers?SearchParameter=%26%40QueryTerm%3D * % 26brandprinters_dte2% 3DLaserJet % 26categoryusageprinters_dte2% 3DBusiness % 26CategoryUUIDLevelX %3 D 6. YQxXjbkYMAAAE0nvZcZzO9%26TieredPricing3%3D%255B400.0%2BTO%2B599.99%255D%26%40Sort.TieredPricing%3D0&PageSize=15

  LaserJet CM1415fn:

  Overview

  Print, copy, scan - in color - and fax, with the first HP LaserJet printing from the Web and mobile devices. To connect to a wired or wireless network. [4] using a screen color touchscreen to print sharp documents. Save energy and reduce your impact.

  Ideal for the

  Companies that are looking for Wi - Fi and networking in a color multifunction capable of printing from the Web via a touch screen and applications and mobile devices.

  Features

  Put easy, touch screen, print on your desktop. Use business apps and the 3.5-inch (8,89 cm) color touch to access and print the information on the Web. [7] Stay productive on the move. With HP ePrint, now you can print from virtually anywhere. [6] Now with AirPrint™. Simply print wireless from your iPad®, iPhone®, iPod Touch®. [9] Spend more time on the business and less time on the program of installation and maintenance. Easily copy on both sides of an ID card to a front document.

• Color Laserjet Pro M452nw: Not accepted print job

  Just installed a new HP Color Laserjet Pro M452nw today, it connects using wireless to my network.  I followed the installation instructions and everything seemed fine and I was able to print the test sheet.  However, when I try to print a document from my MacBook, I get an error message in the print queue, declaring: "Print job not accepted."  I saw the support log, find others with the same question, but maybe on the models of different printers.  In any case, I have followed the instructions for the patch, installed a new printer driver Apple, reinstalled the printer, reset the printing system and I keep having the same problem.  Furthermore, he sometimes interrupts the print queue after encountering the error.  Do not know what to do...

  Hello @sanovogo

  You can try the following changes

  Go to the network set up on the printer and network services, disable ipv6 (disable)

  Go to the link (always within the network set up the menu) speed and the complete change to 100TX

  Sent a new print job to the unit

  If it fails while you see the error on the PC to the printer and try to deal with a report of configuration in the menu reports

  Get the IP address on the right side on the 1st page under settings of the printer

  Enter the IP address in the URL of web browsers, this online application should open indicating the status of the printer in this way can isolate you the connectivity to the printer

  If by this desire to point showing the error on the PC, you can print the configuration report and Web site opening, I'll suggest another pilot, because it must be the one having the problem I could give other recommendations but will like to know what happened first

• Printer HP CP1215 Color Laserjet will reverse only upward when both sides feel

  Recently, I replaced my old Dell XP PC with a new Zoostorm W7x64 Professional OS PC and transferred my HP printer which worked perfectly the new system.  I followed all instructions to update the software and drivers, but now the printer will reverse only upward flanked of printing page even if I chose flip over as my print mode.  I tried the flip up instruction also and it works as it should.  Can I use is no longer my instruction to print two face now that I can't print reports that reads like a book otherwise that manually adjust the paper in the tray.  All solutions, anyone?

  Hi artable ,

  Welcome to the HP Forums.

  I see that you have problems with printing on both sides paper to flip on parameters does not.
  I'll be happy to help you.

  Which driver you have to download and install?

  I download, save and then run the full feature software and drivers if you have installed the Plug-and-Play package to see if that will solve this problem.

  HP Color LaserJet Full Feature software and drivers.

  You change the preference of the printer in the application or in the printer properties window?

  Try another application to see if you have the same problem.

  Please let me know the results.

  Thanks for posting on the HP Forums.
  Have a great day.

• Color LaserJet MFP Pro200: Only a picture scratched when copying or scanning

  Whenever I'm doing a scan or trying to copy a page, all I get is a page with thin stripes, up and down. I did a last, I tried to make a copy in color. I have a page of stripes coloured accordingly. Others I made black so the stripes are only black and white. It does if I do a scan or try to make a copy of something. I did scans with success until last week. Do not know what is happening. Thanks for any help.

  Hello @awestruck,

  I understand that you are experiencing quality problems when scanning or copying on your HP LaserJet Pro 200 M276nw MFP color. I would like to help you today to solve this issue of quality. If the question scratched image produced through both the dish and the ADF on your computer, then your printer is probably affected by a power or programming problem. If the striped image problem occurs through the dish or the ADF, but not both, then there is likely debris sweep across which is at the origin of the defect. Can I please you follow the steps below to resolve this issue.

  • Problem 1: Striped Image occurs in the dumpster and automatic document feeder:

  Step 1: Check of power:

  Please ensure your printer is plugged directly into a wall outlet for power. Power strips and surge protectors can cause HP printers lack power and will not work properly. Once your printer is plugged directly into a wall outlet, please run a test copy to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: update Firmware:

  There may be one occurring problem of programming of the internal Firmware in your printer. The Firmware is the internal "brain" of your printer. It determines what the printer is and how the printer it. If there is a corruption in your printers programming it can cause problems with your machine performance. Can I have it please click here to download the latest Version of the Firmware. Once the Firmware has been downloaded, please follow the instructions on the screen to 'send' the latest Firmware for your printer. Once the Firmware has been updated successfully please test scan and copy functions to see if the problem has been resolved.

  • Question 2: Striped problem occurs of the bucket or the ADF, but not both:

  Step 1: Clean the machine and check the settings:

  Please click here to access the appropriate support material. Once the document opens, please run through the procedure to search for tasks or debris on the glass flat or the mechanism of the automatic document feeder. Once the troubleshooting is complete please try to copy and scan to see if the problem is resolved.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if the lines problem since charger document both flat. I look forward to hear from you!

• HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

  My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

  I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

  On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  Among the many solutions, I tried turning the firewall. No help.

  I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

  Someone who has a solution?

  Hello!

  Thanks for your suggestion of a solution!

  First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

  Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

  In any case, there where the pleasure with your help!

• Color LaserJet 1025: where in the printer 'HP Color Laserjet' machine is the color cartridge / Farbpatrone

  for the color RED light flashes

  where in the machine 'Printer HP Laserjet Color' (location/place in the machine) can I find color cartridges

  that I need to replace.

  Die fuer die LED Farbe rot books end Fuellstand! Nun muesste ich die ROT-cartridge replace

  da ich is ueberwiegend nur mit schwarz group habe und auch nur die shcwarz --Tonercartridge ersetzt habe

  konnte ich den ORT gained der Maschine nicht find wo sich die Farb-cartridges are winds of die ich muss.

  Die PDFs fuer den 1025 color enter keine statement (very konnte ich find nichts dazu

  und bisher nicht antwortet HP support!

  Was soll ich machen mir einen Epson tintenstrahl Drucker kaufen und den HP 1025 color wegwerfen nur weil die RED Farb LED Toner-red nachkaufen anzeigt?

  The Series CP1020 LaserJet Manual User Guide (which I think applies to your model of CP1025 ) shows how to replace the cartridges. the first steps are:

  

• HP Color LaserJet CP2025: Intermittent problem with printer producing pink wide unslightly strips

  I use a HP ColorLaserJet CP2015.  From time to time he overprinted documents with pink ribbons which is unslightly.  The documents can be used only for use in-house.

  It is an intermittent problem and may occur as early as the beginning of printing or begin in the middle of a print job.

  I ran a diagnostic report, but I do not know how to interpret it.

  Any suggestions?

  Thank you

  Alan

  P.S. I'm sure that the printer is out of warranty.

  Just thought that I'll let you know that so far I did not have pink wide overprinting.  It seems that it was a faulty cartridge.  Thank you very much. I would not have thought this.

• Color LaserJet CP1518ni: No option to print in color / grayscale HP Color LaserJet CP1518ni

  My computer recently automatically upgraded to Windows 10 day.  I can't find anywhere is more where I can spend my color to grayscale printer or vice versa.  It only prints B & w now.  I downloaded the recommended printer driver (PCL 6), firmware, etc.  I spent hours trying to find a way print in color!  There is no option in the properties of the printer, printer properties or preferences.  Any help would be greatly appreciated because it's completely frustrating.  This was not a problem in Windows 7 for me.

  Hello @raydunc

  Try this

  Go to devices and printers and right click on printer properties then go to device settings and go almost all the way down to the type of device a color change and save the changes then go in the printer preferences and in the color tab, make sure that in its unaudited grayscale printing option

• HP 2600n Laserjet: hp 2600n Laserjet No. yellow and black printed

  My hp 2600n stopped printing black and yellow, the other colors (cyan and magenta) print very well. I have clean the entire laser (lens + mirrors) and triple checked ALL conections which seem to be OK. I use hp real cartiges, which are full of 85% (all colors). What impression the demo page only the apears cyan and magenta.

  Any thoughts would be nice.

  It pains me to say it, but the problem was with the gartidges. I changed with new ones and the printer is fine.

• How can I use only black cartridge to print documents

  Today, I installed hp 1510 printer all in one, it uses the ink contained in the cartridges, I want to just use black ink for printing documents, how can I do

  Hi @sandeepv

  I can help you with your print settings, so that the printer prints black and white only.

  If you have a Mac operating system, use the instructions below.

  Printing with the Black Print Cartridge-only option

  1. Click file and then click print.