HP Compaq dx2300 format microtour

Similar Questions

• HP Compaq dx2300 format microtour CPU Upgrade requires the bios update

  Hey, my Hp compaq dx2300 format microtour came with a core2duo E4400 processor, I had an E8400 CPU because they share the same socket LGA compatible on the motherboard and it fits perfectly, only the pc does not start, then read around some sites say it is supported by my MSI motherboard A 0, 90, others only reported up to E6700 what I don't understand, is why it wouldn't work? I BIOS v1.14 (latest news on the list of dated drivers '2008'!) and can't seem to find a solution for this, please tell me what to do I don't want to be stuck with a CPU, I can't use cause it isn't a way to map mother read it, thanks in advance!

  Hello:

  Unfortunately, you're stuck with an E8400 which won't work in this PC.  See page 4.

  Here are links to the quickspecs for your model.

  http://h18000.www1.HP.com/products/QuickSpecs/12668_na/12668_na.PDF

  An E8400 processor will not work in any case with x chipset Intel 94 or 96 x chipset.

  In order to run an E8400 into a PC, there need an Intel 3 series chipset or 4 of the series.

  Of course a processor must adapt to an outlet, but is not the only criterion needed to make it work.

• HP Compaq dx2300 format microtour missing PCI Simple Communications Controller Driver (Modem?). WinXP

  Hello

  I had to restore a HP Compaq dx2300 format microtour Win XP system from the recovery partition.

  Everything seemed to work fine except no driver found for PCI Simple communication controller.

  There was no modem in Device Manager.

  I downloaded the driver for the modem on the HP website, but it will not identify / install the driver.

  Remains of the error. (no driver found for PCI Simple communication controller.)

  Any Suggestions?

  Thanks in advance.

  My apologies to Paul.

  Your label says HP Expert 2014. I made a mistaken assumption that you were part of HP.

  I agree that it probably isn't a standard part of HP. I also looked at their specs and the database driver.
  I tried to use never version on the HP web site for their standard model for Agere 56 K PCI Modem driver. He did not consider it as one appropriate driver.

  However, I could only identify a compatible driver using a new pilot identifier utility (new to me at least).

  It seems to work.

  I think I'll keep it in my toolbox in the future.

  http://www.driveridentifier.com/

  My apolgoies once again and thank you for your efforts.

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• Compaq dc5800 format microtour: Compaq dc5800 format microtour - 4 TB hard

  I bought a 4 TB harddrive and installed in a HP Compaq dc5800 microtour.

  The drive is recognized by the computer, but in the BIOS indicates that the capacity of the disk is just 1.8 to.

  I checked all BIOS storage options and doesn't see any clear way to solve this problem.

  Is it possible to do?

  Hello:

  If you use it as a main drive, it won't work because your PC lacks a UEFI BIOS.

  The maximum size of hard drive, you can install a HARD primary as 2 TB in your model drive.

  If you use it as a secondary disk (storage), you should be able to format in GPT to use all 4 to.

  Read this white paper from HP on TPG...

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3658081&docid=emr_na-c02826744&docLocale=en_US

• HP Compaq d220 format microtour Desktop PC Ethernet Controller does not work?

  Hi, I just reinstalled my microtour HP Compaq d220 with Windows Xp Professional desktop PC and I downloaded the chipset in the system first and then audio driver and the driver of network here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

  I went into Device Manager but my ethernet controller was still in others? My internet was not working and I can't access my router? I don't what to do. I lost all my Sunday looking for answers. Can someone help me out here?

  Message edited by foos-special on 22/11/2009 23:23

  Hello.

  Today, I had this same problem with a d220 MT (in fact, I found this entry when you seek a solution ), and the fix was so simple it was embarrassing. The driver download sp25326.exe install just the installer. After you run it, you must go to c:\swsetup\sp25326 and run setup.exe. After that, your card should work. at least it worked for me.

  I hope this helps.

• HP COMPAQ DX2400 FORMAT MICROTOUR: DEVICE DRIVER?

  Hello and thank you,

  I inherited a model above for a friend and he has deleted his personal affair, I installed some of my favorite softwear but found some of them would not work properly, I discovered some the device drivers have had a yellow?, indecating a probem pilot,.

  ? Ethernet controller

  ? PCI device

  ? SM bus controller

  ? Video controller (VGA compatible)

  I reinstalled the operating system, W xp pro and downloaded and installed some drivers from the internet, without sucsses can someone help me with that, would be a very full schedule, thank you.

  Bert (personal information by moderator)

  Hi, Bert:

  See if these drivers work...

  First install the smbus controller driver and restart.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658380&swItemId=ir_57823_1&swEnvOid=1093

  Video: This driver is for the integrated Intel graphics card.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658380&swItemId=vc_64688_1&swEnvOid=1093

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3658380&swItemId=vc_97701_1&swEnvOid=1093

  I need the hardware ID of the PCI device to see which driver it needs...

  To find the hardware ID, you must have XP SP2 or SP3 installed.

  Go to Device Manager and click the PCI device needing drivers.

  Then click on the Details tab in the upper part of the PCI device window.

  You should now see a string of characters that start with PCI\VEN.

  After this string of characters.

• HP Compaq dx2200, format microtour

  When I turn on the computer I get a message that the computer was turned off for a reason any and enter one of the three messages as safe (one of three messages) mode when clicking on safe mode, all I get is blue screen of Windows XP with the wriggles along.   I had installed Skype a few days before - the computer worked after that.    What should I do next?   My grandson wants out of my hard drive to put all of my data and photos on this computer, reinstall windows and then transferring into my computer.    It would be a good idea?

  Hope someone can help and will be able to understand my description of the problem.

  I'll click on the Kudu when I can find it.   Thanks for the email, old_geekster.    The other two choices were: Safe Mode with networking Mode and safe mode with command prompt.

• Updating BIOS for motherboard Μatx-IG41-H on format Microtour Compaq 500 b

  OK, here's my problem;

  I just bought a 4GB Ram DDR3 1333 Mhz Kingston for my computer format Microtour Compaq 500 b. But when I try to connect this new RAM for my motherboard, pc gives error of RAM and that it does not open.

  It works well with other computers.

  Support members told me to update my Bios, but I can't find any update file which is updated. The only thing I could find is the following; http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = HR & prodTypeId = 12...

  I hope someone can help me with this.

  Thanks in advance...

  Here is the HP Compaq Business Desktop ROMPaq Firmware (ROM family CPT006) aka BIOS downloads for HP/Compaq 500 b/510 MT Professional computer. These BIOS/firmware updates do not appear to address any memory related questions. HP/Compaq 5xxB MT maintenance & Service Guide;

  Memory:
  The computer comes with synchronous dynamic RAM 3 double rate
  (DDR3-SDRAM) dual inline memory modules (DIMMS).
  DIMM DDR3-SDRAM:
  Media memory on the system card can be filled with up to two industry standards
  DIMMs. These media memory are filled with at least one DIMM preinstalled. To achieve the
  maximum memory support, that you can fill out the card system with up to 4 GB memory
  configured in a high-performance dual channel mode.
  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:
  240 industry standard pins
  unbuffered PC3 - 10600 1333 MHz compatible
  DIMM DDR3-SDRAM 1.5 volts
  DIMM DDR3-SDRAM strips must also:
  support the latency CASE 9 DDR3 1333 Mhz (9-9-9 calendar)
  contain the compulsory particulars of the JEDEC SPD
  In addition, the computer supports:
  512Mbit, 1Gbit and 2 GB non - ECC memory technology
  front and double-sided DIMMs
  DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not
  support
  NOTE: The system will not work properly if you install unsupported DIMM modules.

  The total State "up to 4 GB' plug... which is in both slots, therefore each slot can only use a 2 GB DIMM.

• HP COMPAQ 6000 PRO format MICROTOUR: busco una change bios del PARA MI PC

  I HAVE A PC HP COMPAQ 6000 PRO FORMAT MICROTOUR SERIAL NUMBER 2UA01622NL SOLO QUIERO ADDITION DEL BIOS POEQUE NO. ABRE UNA COMPUTADORA PARA CONFIGURARLA GRACIAS.

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• GP Compaq 6005 Pro format microtour: Reinstall a computer format microtour HP Compaq 6005 Pro

  Hello

  I want to install Windows 7 on several Compaq 6005 Pro format microtour (VN797ET).

  I have product keys Windows 7 Pro to the labels on the PC, it also says OS: Win 7 to XP Pro.

  But the keys to Windows 7 should work for Windows 7 Pro?

  How can I get a W7.iso that runs on the PC. I tried the Microsoft Download page:

  http://www.Microsoft.com/en-us/software-recovery

  When I enter they key I get the following error;

  "The product key you have entered seems to be for the software that came preinstalled on a device. Contact the manufacturer of the software device for recovery options. »

  Can I download a HP image somewhere? These keys function with a generic W7 iso (sp1)?

  Hello:

  You will need to order a set of HP for your PC recovery media.

  If you live in the USA/Canada, call this number... 1-800-334-5144

  If you do not, I have this old list of numbers of support by country.  I don't know if all the phone numbers are more valid.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/business_desktops/6005us_332630_007.PDF

  Have the serial number of one of them handy to give to the customer service rep.

• HP compaq dc5700 microtour: graphics card for hp compaq dc 5700 format microtour

  Hi Mexico.i have a hp compaq dc 5700 microtour and I would like to know what graphics card is compatible, I want to buy a named Nvidia Zotac Gt610 Ddr3 2 GB compatible PCI express x 1 graphics card, but I don't know if my desktop is supported by this graphics card
  
  Care of real desktop
  Micro processor: Intel® Core™ 2 Duo processor E6600
  (2.40 GHz front side bus at 1066 MHz, 4 MB Cache)

  [I have change the processor]
  
  RAM: 7 GB
  
  But my pc slow
  
  I need whether or not the nvidia zotac gt610 graphics card is compatible with this pc? reason why I want to buy it today

  I can't say with 100% accuracy it will work, but given that HP lists the NVIDIA GF 8400GS 256 MB dual head adapter (PCIe x 1) card chart as supported, I don't see why wouldn't the map you posted.

  It should work perfectly, IMO.

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• Password reset for HP6200 Pro format microtour

  Hi all, I have a small question.

  How to reset the password (only the password installation) in the HP Compaq 6200 Pro format microtour Bios?

  Is there a jumper to switch?

  Thank you!

  Yes, there is a jumper.

  3. remove the cover Panel or access to the computer.
  4. look for the header and the rider.
  NOTE: The password jumper is green so that it can be easily identified. To locate help
  the password jumper and other components on the system board, see the map illustrated parts & Service
  (IPSM). The IPSM can be downloaded from http://www.hp.com/support.
  5. remove the jumper from pins 1 and 2. Place the jumper either pin 1 or 2, but not both, as well as
  It does not get lost.
  6. replace the Panel cover or access to the computer.
  7 reconnect the external unit.
  8. connect the computer and turn it on. Allow the operating system to start. This clears the current
  Password and disables the password features.

• HP DX7300 COMPACT MICROTOUR: UPDATE THE PROCESSOR FORMAT MICROTOUR COMPACT HP DX7300

  Hello

  I have a problem on my pc when I want to upgrade the CPU on my computer format microtour HP DX7300 to Core 2 duo E6850 3.0 ghz.

  After that, the shows black screen pc and prode 9 times beep. Grateful if someone can help me on this issue.

  Thank you

  Hello:

  Unfortunately, you have installed a processor not taken in charge for which there is no solution, but to remove it and install a supported processor.

  Please see page 7 of the link below for a list of processors supported in the dx7300...

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04284220 .pdf

  The E6850 has a FSB of 1333 MHz, and no with a 1333 MHz FSB processors will work in the dx7300 is why your PC beeps you 9 times.

  o-Processor-E6850-4M-Cache-3_00-GHz-1333-MHz-FSB http://Ark.Intel.com/products/30785/Intel-Core2-du