HP dc7800: dc7800 BIOS & firmware update

Similar Questions

• Presario SR5100 - CPU fan failure / BIOS firmware update

  My SR5125CL Office does not start even after replacing the CPU fan. Error: The CPU fan has failed.

  Some sites, I searched recommended deactivation/check the fan under the hardware > monitor in the BIOS.
  Cannot find this menu in the BIOS. Attempted to upgrade the BIOS from:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3460...

  use a different PC and it just tries to install on this PC. No options to create an update CD. Looking for other sites, same lame upgrade that involves running the OS. Even if the PC boots long enough to upgrade the firmware, it is now Windows 7 and the patch is only for Vista.

  I'll win the volunteers here and explain others to profit from my mistake. I took out the old fan to match. When I installed the fan nine days later I have it plugged into the outlet of case fan. For a CPU fan, it is not the BIOS. In any case, similar problems on the forum gave me the idea to look for another job from outlet and it is.

  Thank you

  Ken

• HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

  This computer came with Windows Vista pre-installed

  Now I'm running Windows 7,
  What I downgrade to Vista to update the Bios and the Firmware of my hardware?

  Or the drivers Bios and Firmware Update (.exe files) are fully compatible with Windows 7?

  What suggest you the update in Windows Vista or Windows 7?

  NVIDIA GeForce 8500 GT video BIOS update
  IPIBL - LA motherboard BIOS update
  HL-DT-ST GGW - H10N BD Writer / update the Firmware of the HD DVD-ROM drive

  SAY THANK YOU WITH CONGRATULATIONS

  Macias
  -Please do not use TinyURL my firewall blocks them.
  Click on the star of CONGRATULATIONS on the left, if I helped you. Please mark as RESOLVED, if your question has been answered.

  Hello

  starwarsmex wrote:

  You are right!!!  If it is not broke, don't fix it! But to be honest, I did not play any Blue Ray DVD on my computer, so if a problem exists with the current firmware of the device I need to do? or just curiosity, I'm sorry I lose you, update/upgrade uses the drivers to recommend running the operating system preinstalled in this case Windows Vista?

  If problems exist, then try to upgrade with the appropriate firmware listed in the driver version Vista.

  Some of the improvements will work and others cannot.  It is unfortunate but it is like that between Vista and Windows 7.

  But... If everything works well, change the drivers and/or firmware and invite trouble.

  Best regards

  ERICO

• BIOS and Firmware update

  Am I wrong in assuming that no firmware and BIOS updates are needed for my blade servers as part of the ESX updates?

  Mike

  You are wrong to assume that. You should always apply BIOS and updates the firmware for your hardware.

• Workstation xw4600: upgrade CPU to Xeon X 3363 xw4600 - get error on POST firmware update

  Until classified Core 2 Duo 8400 3.0 Mhz CPU to Xeon X 3363 2.83 Mhz CPU using 'Sticker Mod' on X 3363.

  Works fine, but with an error at startup.

  Get this error on the POST:

  "1801 Microcode Update error-
  Missing or invalid processor update. Please
  Contact Hewlett - Packard Company for a new firmware
  Updated to support the new processor not. »

  The current version of BIOS is 1.34 which I think is the most recent.  How to upgrade the BIOS to the Stepping of the processor?

  Use a xw6600 or an update of the BIOS z400?

  I was able to get help on changing the Bios microcode for the Xeon x 3363 processor.

  Fans to run at normal speed now and start error "1801" disappeared.  Machine runs great!

• HP zBook Studio G3: zBook Studio G3 - DEATH BY INTEL ME FIRMWARE UPDATE

  WARNING!

  DO NOT INSTALL THE UPDATE OF THE COMPONENT OF THE (COMPANY) INTEL MANAGEMENT ENGINE FIRMWARE!

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8934841 & swItemId = ob_159465_1 & swEnvOid = 419...

  Component Firmware Intel management engine (ME) (American International)

  11.0.0.1194 Rev.A
  December 1, 2015

  We bought 5 of these laptops for our Engineering Department and I was against a tight schedule to get them deployed (the next day). I started working on obtaining a set of installation with the necessary software and then I just want to clone one for the other 5.

  I did a clean install of Windows 10 and installed all the drivers from the HP site. Then I ran Windows updates until everything is up-to-date. I disabled Windows Defender. Now all that remained was update the firmware BIOS, Intel ME and Thunderbolt using the downloaded utilities since the page drivers. The BIOS installed fine, but it's a really weird update process. Due to the beeps and lights blink during his work. There is no progress bar to let you know if she is doing anything. At some point, as the beeping stop but it's still really work. Then he starts and updates another part of the system and so on. Anyway, that everything worked fine. No problem with the update and Windows 10.

  So I ran the update of the Firmware of Thunderbolt and open up a command window saying that it couldn't find the controller. It looks like not there nothing after that point and just closed.

  Finally, I ran the Intel Management Engine firmware update utility. He opens a command window and says that it is loading the file and check and so on. Then he wrote the Flash file and takes a minute or two, doing so. Once it's done, the firm order window and back to business as usual... until you restart. Once you do this, the system is toast. It does not start. Black screen, fans run at high speed and the CapsLock and NumLock bulbs only 5 slow flashes indicating that there is something wrong with the motherboard. I'm starting a supported by HP chat session.

  I am told to disconnect the battery. To access the battery, you need a bit T - 8 Torx and you unscrew 11 screws to remove the grill cover and low fan (pedestal). I did that and disconnected from the battery. Reconnect after a few minutes and tried to start. Nothing, same thing. The support agent told me that a technician on site should be sent to replace the motherboard.

  While the lower lid has been opened, I noticed that there are two small LED lights near the SSD. There are supposed to be the diagnostic lights and I found an article in the service manual indicates if one of the LEDs is lit, the motherboard should be replaced. This lights a few seconds after the connection of the power supply for the laptop or by pressing the power button.

  I asked the support agent if they knew why it happened, but they did not know.

  So, I got 4 portable more to work with. I took off the dead laptop SSD and put a charge in a brand new out of the box. Started by and on the desktop Windows 10. This laptop had BIOS v1.03 on this subject so I ran the BIOS updated and rebooted. All right. At this stage I myself asked to perform other upgrades of the firmware or not. I thought that I had a 50/50 chance and I'm the kind of person that simply be whether it was a fluke or if there really was something seriously wrong with the update of the Intel ME firmware. He ran while first instead of love at first sight to date. Update Intel did ME the same thing before, opened a window to order, checked and then flashed... and after a reboot I got another laptop dead.

  At this point, I shook my head and frowned, looking at the HP logo.

  I tried calling support, but their laptop zbook/computer service has been closed from 10 is no support by phone or chat support. I have to wait until the morning to make a call in warranty for this second laptop dead.

  The Intel ME firmware update released on download of HP ZBook Studio G3 section was not compatible with these laptops and caused the laptop no longer starts. Only an exchange of motherboard could solve the problem. HP since then changed the link to the Intel ME firmware update for the appropriate softpaq.
  
  Those who had run the update of the bad firmware and their laptop brick had to call the HP technical support to schedule a replacement motherboard on the spot.

• FS728TP attention firmware update!

  Too bad, you can ruin a good switch poe by a stupid firmware update. Tried to update my FS728TPv1 to the latest 5.0.0.8 3.0.0.22. Downloaded the zip file, you start the procedure to update with discovery of the smart wizard, message received "updated successfully"... but after reboot the switch is bricked. Did some reading, found I'm not the first guy with this case, should be updated first, startup code from 1.0.0.2 to 1.0.0.5. But it was not a code starting update file in the zip! I found somewhere on the netgear firmware french site the oldest 5.0.0.6, which contains ng_fs728tp - V5006.ros and ng_fs728tp_boot - 1005.rfb. I feel so stupid, I'm?... to open the switch box, found 88E6218-LG01 Marvel, used on some routers 10 years ago chip. anyone find a procedure to revive the switch, a tftp, a series or something connection session. I know netgear offer guaranteed for life and replace the switch, but not my case... just feel sorry a switch of the brick work

  There is a solution, in case you brick the switch to update the firmware, do not update the boot code appropriate. The boot code is some program low level similar to the bios on the card. Did some deep research on Marvel 88E6218-LG01 Chipset, I found somehow that pin 52 and 53 are Rx and Tx respectively to integrated serial UART. The two signals are 12 (Rx) and IC U27 PIN 11 (Tx). The IC and passive components around him are not soldered because the switch is not a serial console. Near U27 is the serial J8, not used. The U27 is a similar to max232 chip. The idea is to make a connection with the switch using p52 series = Rx, p53 = Tx and, of course, GND, I soldered the wires to p11 and 12 of the U27. Then do a session in Hyperterminal using baudrate = 38400, data bits = 8, parity = none, stop bits = 1, flow control = none. Power on the switch, you will see power on self-tests, boot network device based on 88E6218 software version with ARM946E-S then: autoboot in 2 seconds, press return or ESC to interrupt and enter the dance. In those 2 seconds interval if you press the INPUT switch goes to the start with 6 options menu: 1 = software download 2 = flash file Erase 3 = 4 = diagnostic mode password recovery procedure entry 5 = Set baudrate terminal 6 = back. Choose option 1) then the switch is waiting for the firmware file "code using XMODEM download, $$$ writing and waiting...". Now go to hyperterminal transfer, send file > Browse for firmware 3.0.0.22 .ros (before update wrong firmware), choose the XMODEM Protocol, and then click Send. File transfer begins, will take about 25 minutes. After that the switch restarts correctly, and discovery of the smart wizard he found. Update the firmware on 5.0.0.6 family must 1.0.0.5 to update the BOOT CODE. The boot - 1005.rfb can be found on this website: http://www.netgear-forum.com/forum/index.php?s=7d23113dd1660e3c9d613aa739513390&showforum=704 , in 5.0.0.6 zip of the firmware. Have fun...

• DVRW firmware update killed

  I have acquired a used model m7790y Pavilion Media PC with some problems.

  The original owner had not created the recovery disks. I was initially unable to succeed in their creation, so I ran to the recovery of the recovery partition, using the start option. That's happened. I could eventually create the recovery (on 2 discs DVD + R) media. If the drive worked there at that time.

  After that, I have treated all updates Vista SP1 til. Then, I have treated several updates HP found in the x 32 area of Vista software and driver download for the system, including an updated firmware for the optical drive from TSST. Then, I treated all other Vista updates thru SP2 and beyond. I thought that everything was fine but then I tried to open the optical drive and it did not. Then I noticed that a light shone from the reader. Windows does not currently show a DVD player device, but because of BIOS. It shows in the BIOS as the 3rd drive: TSSTcorpCD/DVD. The update of the firmware, I treated is sp35094.exe and has been marked as TSST TS-H653L DVD-R/RW Drive Firmware Update Version 0714.

  I have redownloaded update and tried to re - run. It fails, saying that the system does not have the minimum requirements for the update. As the drive is not listed in the Device Manager, maybe it's to be expected. I don't think that it produced an error the first time. Both times I ran from within Windows Explorer.

  Is it possible to fix this drive or is it now a brick?

  The device is seven years old. It's a brick.

  Replace the DVD burner with a new DVD of SATA burner. They are pretty cheap these days and about $20.00.

• 900 Elitepad F.50 (SP68375) G1 firmware update and defect TPM, Bitlocker problem

  I recently installed the firmware recommended for ElitePad 900 G1 (sp68375.exe) running Windows 8.1 update 1

  System BIOS Update F.50 for HP ElitePad 900 G1 Tablet (c04409743)

  In order to install the update I had to suspend bitlocker drive encryption, which is a mandatory requirement in my workplace.

  After properly installing the update of the firmware and trying to catch the bitlocker encryption, Windows reports the following error:

  "BitLocker Drive Encryption error."

  Wizard initialization has failed.

  The BIOS does not correctly contacted the

  Trusted Platform Module (TPM). Contact the

  the computer manufacturer for BIOS upgrade instructions"

  I tried to re-download and reinstall the firmware update, but ended up with the same error after successfully update a second time.

  Someone else (or HP) applied this update firmware and can fix any counselor or a workaround to get BitLocker up and run again? My ElitePad is now reported as non-compliant system due to the suspension of BitLocker.

  Thank you.

  Please try latest BIOS on HP.com (F.52) for the Elitepad 900.  If it solves your problem, please check the issue as resolved.

• color laserjet mfp m277dw pro: the new Firmware update

  My M277dw printer is automatically downloaded and installed a firmware update last night.

  The datecode on the printer now shows 20160606.

  The update took me by surprise because I was in the middle of a print session.

  Is it a real update?  If yes where can I find the notes that this version is not on the driver download page.

  @Robert069,

  All the firmware update are directly from the HP Server. They are automatic HP where to connect to the network.

  I don't have details of which fixed the update but not yet posted to the customer of the USB. The update last two were to improve the network connection and built-in web server looks like.

  You don't have to worry about melware on the printer, as melware is a computer-based software. Can not be installed on printers.  Remember to update the printer firmware are link updateing the BIOS on a computer.

  I hope this helps.

• OfficeJet Pro 8600 Premium Firmware update

  Hello:

  Known issues with the recent firmware updated for Officejet Pro 8600 Premium of CLP1CN1150CR to CLP1CN1322CR?

  I created the shortcut on the desktop and have printed the presentation and installation Instructions. The printer is connected locally (via USB) to my PC from main office (where I do the upgrade). And I will follow the instructions to make a break my firewall (KIS2013).

  It looks like a simple process, but flashing firmware & BIOS updates on material/mobos make me always disgusted.

  So I'm just now - inquire in advance - of known issues with this particular update or the update process? Thank you!

  daledoc1
  ------------------------------
  OfficeJet Pro 8600 Premium (USB-hand DT & wireless-LT)
  OfficeJet 7410 (USB-old DT & wireless-LT) - still works very well!

  view 58 and no response? Bad luck.

  Well, too bad.

  I guess it is "resolved", I advanced and performed the update.

  I pause my AV/Firewall during installation.

  It took about 5 min or less via a USB connection.

  Also, I restarted the computer after being full, like the phone that recommended technical support, even if restarting is NOT listed in the instructions.

  It seems to have been successful.

  Thanks anyway!

  P.S. for anyone who needs to do this, please don't forget to read the instructions, in particular the warning to the 8600 a connection to the computer via hard wire (ethernet or USB), no wireless. (I don't know if the update could interrupt or not, or if the printer would be damaged if we tried to do wireless).

• Question of firmware update hard drives/RAID

  We have a Server Power Edge R210II with OS MS Server 2008R2 and a Controller PERC H200 RAID (two disc HARD 1 TB Seagate SATA in RAID1).
  Recently, there is a new firmware for Seagate drives on a dell (Package update for MS Windows) support site.
  I really don't want to lose the server :) and never update firmware on the disks on the server with RAID (I've updated the players only on PC).
  Can someone tell me a procedure to update the firmware on my drives? Problems with the upgrade, best practices etc?
  Thanks for any help,
  Marius

  Best practices:

  • First have a backup. Should data not destructive, but everything can happen.
  • Use SUU or Repository Manager to update ALL of your system - iDRAC/BIOS firmware, PERC and other firmware must be updated before the firmware of the HARD drive.

  Most HARD drive firmware updates are bootable, so you just get the utility boot and update.

  You cannot update firmware of the drive not Dell with Dell firmware (i.e. If you bought the retail/generic readers).

• How can I save BIOS Firmware on G60-243DX

  How can I save BIOS Firmware on G60-243DX

  does anyone know of a tool on the net.

  My G60-243Dx has a F.33 BIOS.  It cannot be that.  latest version of the BIOS is F.32A.

  I think that geek team at best buy, updated with incorrect firmware.

  There is no available tools to save it... and I doubt that they flashed the BIOS of your laptop with the bad because the software will not Flash the BIOS, if it does not.  As well, it probably doesn't work very well if it was the wrong version.  HP site is sometimes behind the posting of updates... service centers probably have the latest versions.

• firmware update

  I tried updating my two cinema Display on my iMac (27 inch, end 2013) iMac Intel Core i7 3.5 GHz 32 GB 1600 MHz DDR3 NVIDIA GeForce GTX 775 M 2048 MB tons of time, using all possibilities, but unfortunately not worked.

  What is happening with this firmware?

  Hello RUBENSCOSTA,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your Cinema Display works again is for you!

  If I understand correctly, you are unable to update the firmware on the LED Cinema Display. I would like to try the following steps to get these working again:

  1 make sure that your iMac has all available firmware updates installed as well:

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor

  2. try to follow the process in this article on the updating of the LED Cinema Display Monitor:

  On the 27-inch LED Cinema Display Software Update 1.0

  3. If you're still having problems, you can see the general troubleshooting guide:

  Get help with your Apple Cinema Display Monitor

  See you soon!

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?