HP Designjet 500 42: Old problem of driver update

Similar Questions

• HP designjet 500 plus network problem

  Hello

  I'll need your help. I have the HP designjet 500 printer more and today I bought the HP JET DIRECT 620N NETWORK CARD. I installed inside the socket, connecting the card with an ethernet to pc cable. I went to the installation of hp on the monitor, select Yes for cfg network, ip and dhcp, I reboot the tracer and in the monitor shows he gets the local IP 192.168.1.2 as well as info from rest, which is are in conflict with other devices on the network. The problem is that im trying to find the printer over the network connections on my windows xp pro, but it does not show on the results. I don't see that there is an icon that does not give me an error. I also tried to see my tracer of the firefox browser with the local IP which has achieved and open the menu normally, showing how the network works. I tried several times to reboot pc and tracer in case they are blocked, but got the same problem. Perhaps there is a driver for win xp to see the plotter on LAN? I need to have your help as soon as possible, because a lot of work to do with the tracer and this question comes back to me.

  PS I should mention that I currently have a network with 3 pc the on the Office that they link together without any problem.

  P.S. This thread has been moved to printers - LaserJet for printers - Designjet & large Format. Forum Moderator - HP

  First off there are 2 homes EIO to the back, so you messed up there. With the power off, install the gl2 card in another location and see if you still have the problem. There may be a plaque on the slot, held in place with a screw at the top and bottom. Just remove the 2 screws and remove the cover and install the card.

• HP Designjet 500 more: DRIVER FOR HP Designjet 500 FILE more

  Hello

  HOW to GET Designjet 500 more DRIVER FOR Windows 10 Enterprise 64 - bit OS

  Windows 10 is not released until July 29, pilots and what products will be supported probably won't be out until close.  The HP page here says "compatibility tool soon, come back in the end of July."

  That said, I use the old driver Windows XP x 64 on my decades old Designjet 650 c in Windows 10 preview.  I think Windows 7 or 8/8.1 drivers work in Windows 10 for the Designjet 500 if there is not drivers provided.  At this point there are sixteen variations of HP Designjet 500 models available through Windows Update, including variants of the 24 "and 42" models, standards, and only, HP and Microsoft provided drivers PS mono models and color and HPGL2 drivers.

  

• HP Designjet 500: Driver for Hp Designjet 500 42 invalid in Win 64

  I downloaded the driver for mi hp designjet 500 42 (c7770b) printer in windows 7 Professional 64-bit (with all the software updates for today 02/20/2015). When I double click on the exe file you downloaded here: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=377948&lang=en&lang=en&cc=us&cc=us

  I got the message "it is not an application valid win32" and it is impossible to install.

  Hello

  You have the same error for all drivers below?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=377948&swItemId=pl_66260_3&swEnvOid=4063

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=377948&swItemId=pl_56198_2&swEnvOid=4063

  If the same phenomenon occurs for both of the above drivers try, follow these steps, the steps for Windows 7 should be the same as those listed for Windows Vista in the article:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00318556&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0001

  Hope that helps,

  Shlomi

• Unable to drawings SolidWorks great impression for HP DesignJet 500 via Server

  Hello

  Our company has a HP DesignJet 500 with 24 "Inker for tracing large pages of design drawings created in SolidWorks to our technical workstations.  These workstations all have Windows 7 64-bit with 8 GB to 16 GB of RAM and 1 TB of hard drives and intrigue to the drawing via on board our servers (Server 2008 32 bit with 4 GB of RAM), which connects to turn over a connection IP to JetDirect EX Plus (with a sleeve of 10 Mbit / s and a CAT 5 network cable) and a parallel cable.  Lately we had problems tracing of parts of very large assembly drawings (100 MB + size), by which desktop lock when trying to trace.  They can even preview before printing (print dialog box disappears when the user clicks the Preview button).  Restart the plotter and the JetDirect gave no results better.  The server has plotter driver installed v6.08 (data file version 2.1), and the tracer itself is on firmware 3.03 version.  No errors are appearing on the plotter except an error of 79:04 in December.  Tracing a bitmap file doesn't seem to be a problem, but I could not try the other formats again.

  Any thoughts?

  Thanks in advance,

  Michael

  In the properties of the driver, there is a tab services which must display a troubleshooting icon and you can click on "Run as bitmap".  This will allow the desktop process files to print instead of the printer, which cannot process large files.  It is the only way to execute works of old printers not designed to process.

• Product name: 120-011 IN: fixing the old internal hard drive

  Who so ever of law...

  My problem is that when I bought HP 120-011 IN he came with the capacity of 500 GB internal hard drive, but my old system had a 1 TB hard drive. So as my all files and data is in this hard drive old I want to fix that on my new PC.

  I therefore ask you to give me suggestions on how to attach my old 1 TB drive to my new PC.

  Abhishek.

  Try one of these.

  http://www.eBay.com/ITM/2-5-SATA-to-USB-hard-drive-caddy-HDD-case-enclosure-notebook-black-/331085862772?PT=LH_DefaultDomain_3&hash=item4d16415774

  REO

• Designjet 500 24 '': hp designjet 500

  I just got the printer HP Designjet 500 24 "."  I downloaded the drivers there.   I went to devices and printers and clicked on the new printer.  The designjet is not discovered.  Tried to do it manually, but I don't know my way around that.  Any tips?

  I deleted all of the printers I had and restarted the computer and tried to add again.  No dice.  He is grateful to my other main printer without problem.  Do not know how to move forward to get the designjet recognized so I can start printing my game.

  I went to the properties of the print server and the driver installed there - "HP Designjet 500 24 by HP" that still did not help.

  I found a link that has helped to explain how to add a local printer by using the tcp/ip address or the host name.  I finally got to work!  I struggled for a good 3 hours trying to find different ways to add.

• Designjet 500 prints on usb but not ethernet

  I inherited a DesignJet 500 printer 24 in. I can print so that I am related to him by a USB cable but when I try to set up on my network, I can't print to it across the network.  I can ping the JetDirect card and can telnet in as well so I know that I have the correct IP address and it the card itself can communicate with my network.  I use the same driver via the USB port and the network port but still unable to print over the network.  Any ideas why I can connect to the printer on my network, but I can't print on it unless I connected locally with a USB cable?  I tried with a laptop running XP32bit and Win7 64 bit with the same results.

  Thanks for the help.

  Thanks to the entrance to the Forum of commercial products.  BTW, I discover to my problem.  It looks like the problem was the cable used to connect to my network.  One of the things that I should have checked first, but don't have.  After replacing the cable, I was able to print from the network to it.

• HP Designjet 500 42 "do not print

  Looking for help with my HP plotter. Recently, I replaced the service station and print transport. I also downloaded the driver (Driver HP DesignJet 500 PCL3GUI 32-bit) and firmware (series of printer HP Designjet 500, 510 and 800 Firmware Upgrade) to new pc XP from the original pc used for printing crashed. The printer displays indication normal and says ready for jobs however when I send a print to the printer it just shows treatment work and transport movements feeling left right at a few times, but the jobs do not print. Also, it seems to stay forever in this (suspended) mode and I have to power the printer off to return to the normal screen ready.

  What is a driver/firmware issue or hardware?

  If I try to print a configuration page it also does the same thing.

  Thanks in advance.

  Jacob

  It is a thin cable error. The ends of the cable have questions or it is not completely sitting in the cart. I guess the cable could be as bad.

• FAT32 formatting for 500 GB Seagate external hard drive using Windows Vista

  How to format FAT32 file system for 500 GB Seagate external hard drive using Windows Vista?

  Hi MVRMVR,

  Windows will work generally only format a drive in FAT 32 if it has a capacity of 32GB, no more. To format in FAT32, Yes, would need to create multiple partitions. This, of course, you don't want to do.

  I have not tried to format a large drive in FAT 32 but I guess that any third-party partitioning software (Acronis, Paragon etc.) would be able to do it without any problem. Alternatively you can do it from the Windows command prompt. For more details, see the link below:

  http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/ John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud

• I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  But what was your question? virus? most of the time its not even located in thunderbirds dirctories. Then it reappears.

• Designjet 500 proposed purple colors AutoCAD printing gray

  We used the Designjet for years and have several colors put in place to print gray and projected (252, 253, 254 and 25).  They have recently started with purple print.  I have run all diagnostics and calibrations and alignments available, and they are all good.  I looked at several troubleshooting sites and had no luck.  I use AutoCAD v 13.

  Assuming that the print heads are out of all the colors correctly, try this:

  The printer HP Designjet 500 and 800 series printers have a fix that was implemented in the version of firmware A.02.08 and higher. This hotfix provides additional media profiles that prevent blue to mauve color output change. This fix is only applicable to the series 500 and 800 and only if the printer has a version of firmware of A.02.08 or higher. Once the firmware has been upgraded, follow the steps below to make the appropriate changes in the Panel menu front printers:
  
  1.
  
  Highlight the menu paper icon on the display on the front panel of the printer and press ENTER.
  2.
  
  Scroll to the paper type and press ENTER.
  3.
  
  Highlight Enhanced colors and press ENTER.
  4.
  
  Select the type of paper there and then press ENTER.
  5.
  
  Press the Menu key to return to the normal display of front panel

• Game Minecraft OpenGL satellite L650 - driver update problem - PSK1E

  Hello

  I know that several posts have already highlighted this problem.

  I have a Satellite L650 PSK1EE.
  Sorry if this is not the right place to post but I could not find anywhere else to start a new thread.

  Essentially my children want to use * Minecraft * on this laptop. I downloaded it but get the error message that my graphics driver is not compatible opengl. I only have Intel. So I tried the usual driver updates, then I tried to download a generic Intel driver but I don't know which one is right.

  Once I have selected * chart * then * laptop graphics driver * s then I get the choice between 2nd or 3rd generation processors, accelerators and mobile chipsets, which none means nothing to me and I'm stuck.

  It seems that some people have managed to circumvent the built-in graphics card driver and update manually one this way, once you know what you download and then unzip and so on...

  Of course, I can waste my time.

  If anyone knows how to proceed, I'd be very grateful for any help so that I can stop spending hours Googling this.

  Thank you very much

  Hello

  You must install the Intel HD driver.
  Try this driver of graphics Intel HD for Win 7 and Win 8

  You must choose the zip (NOT exe) for System 32-bit or 64-bit package according to the version of the system that is installed on your laptop.

  [Drivers Mobile Intel HD graphics | http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = 2nd + generation + Intel % C2% AE + Core % E2% 84% A2 + Processo rs + with Intel % C2% AE + HD + graph + 3000% 2f2000]

• HP DesignJet 500: HP DESIGNJET 500

  General question... I am looking to buy a little used designjet 500 and do not see in the characteristics of the product, if it is a printer and strawberry.  Can someone tell me if the designjet 500 printer 24 inches offer traced functions designed to make signs or conrour cuts?

  Thanks in advance,

  Ken

  Hello Ken,

  Designjet 500 has the ability to cut the paper/online support right (at the end of the print job to the Cup/entity roller ring at the end of the print job), but I do not think that this option fits your requirements.

  Kind regards

  Ask me