HP Designjet T2300 PS printer: HP Designjet T2300 gas station problems

Similar Questions

• DesignJet 800: DesignJet 800 gas station 21.10 error

  I have DesignJet 800 where the belt failed, he grated damaging transport. Cart and belt have been replaced, but now I'm getting 21.10 service station error. I followed recommended procedures described in the manual of maintenance for troubleshooting of HP but nothing helps so gas station has been replaced as well but the problem persists. I posted video here:

  https://youtu.be/9Jbun-IZL90

  to show what happens when starting and I hope someone has some suggestions on how to deal with this. Thanks in advance.

  I encountered this problem once and now I know that the solution and it happens.  When you put on new belt and give support on you right hand side pinch the big grey sheet which goes back to the emod on the other side.  It happens more often than you think.  It is very easy to fix but you must remove the right side again and this time when you put the support on the right side to make sure the flex cable has a lot of game, when the support is totally against the frame and before you start editing I think 7 screws holding it.  It will work after that that the cable is not damaged but being pinched roots of this problem.

• Printing with ps cc (2015.5) problem

  I had been printing since I bought this Epson 3880 Stylus Pro, at least once every 2 weeks to more than a year without any problems. I print directly from photoshop, last week I printed 2 images, isn't a problem. Until today, prints comes very evil. In 2 different images green appears in the shadows and like don't muddy not sharp or details. Very hard to explain, but you can see the result of printing with an attachment. Impressions are UNEXCEPTABLE.

  So I try to print from LR with a different image that I never print from LR before. And the result came out the same. Green and muddy in the shadow or the dark area... very sad... do not know what the problem is and really have no idea how to solve this problem.

  Can you please help?

  

  Have you tried taking this image and printing of another

  no Adobe app such as preview?  Are the results the same?

  Have you tried this printer with another computer/device?

  The last of them is important to determine if you actually have a printer

  hardware failure or if there is a corruption of software/driver on the iMac.

  The first step is to determine whether or not it is a problem for Adobe.

• When I print, the photo viewer rises and am OBLIGED to print from that program. The problem is, that it does not work - the colors are inverted and incorrect. All attempts to correct in the color management failed.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • When I print, the photo viewer rises and am OBLIGED to print from that program.  The problem is, that it does not work - the colors are inverted and incorrect.  All attempts to correct in the color management failed.  Some images are color reversed negatively. and others not when the print window picture viewer options are increasing. and every time I print a normal color on the picture he reverse out come.
  • Recent changes to your computer
  • What you have already tried to solve the problem

  didn't work :/

  ==============================================
  It may be interesting to try to remove all color profiles in the color management.

  Windows 7 - change color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  If this does not work... update or just reinstall your printer driver may be worth a try.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• HP Designjet 500 42: Old problem of driver update

  Hello

  I have HP Designjet 500 printer 42 in. And I can't update the old drivers. I downloaded new drivers drivers

  Installed new drivers and the printer connected to the computer. Installed printer itself. Driver version but check it shows in 6.08 (preferably printer-> subject) window.

  I deleted all drivers using pnputil.exe d Oem # .inf and printui/s/T2 orders. All the drivers of HP has been removed from

  C:\Windows\System32\DriverStore\FileRepository

  and

  C:\Windows\System32\spool\drivers\x64\3

  Installed new drivers (8.10) and pluged in the printer. Printer has been installed but with drivers 6.08. So I went to the "print management" as an administrator. Pressed on HP Designjet 500 42 by HP printer 'Manage sharing'-> "Advansed"-> "New driver"-> 'Disc' and in C:\Windows\System32\DriverStore\FileRepository I chose "dsgj510.inf_amd64_* *" folder and the dsgj510.inf file here. But could not find "HP Designjet 500 printer 42 in.". Here only:

  HP Designjet 500 42 + HPGL2 card; HP Designjet 500 plus 42; HP Designjet 500ps plus 42; HP Designjet 500PS42 + HPGL2 card; HP Designjet 510 42 inch printer and HP Designjet 510ps 42-inch printer.

  I tried to use HP Designjet 500 42 + HPGL2 card HP Designjet 500 plus 42 drivers. But printer would give an error message and do not print.

  With the help of the 6.08 driver version I can print from some software, but I need to print from AutoCAD. And AutoCAD gives me the error message "no: cannot use this configuration of tracer for one of the following reasons: the driver is not found, cannot find the device or the driver has a problem." No device has been substituted. "And I can't choose the HP designjet 500 printer in AutoCAD.

  It is a shared printer and other computers on the network have 8.10 drivers and can print from AutoCAD. Single computer, the printer is pluged cannot print because it driver 6.08.

  I found the problem.

  On the page under 10 64-bit windows this is only "HP Designjet 500 and 510 HP-GL/2 and HP RTL driver 64 bit" 8.10 drivers. And this driver is not HP Designjet 500 printer 42-inch drivers. But under 64-bit windows 8, here's two pilots. "Driver HP DesignJet 500 PCL3GUI 64-bit" 8.10 drivers and same as above. This file have drivers for HP Designjet 500 printer 42 inches and runs under windows 10.

  If HP support lazy to put all work them drivers under windows 10 for HP Designjet 500 printer.

• HP designjet 500 plus network problem

  Hello

  I'll need your help. I have the HP designjet 500 printer more and today I bought the HP JET DIRECT 620N NETWORK CARD. I installed inside the socket, connecting the card with an ethernet to pc cable. I went to the installation of hp on the monitor, select Yes for cfg network, ip and dhcp, I reboot the tracer and in the monitor shows he gets the local IP 192.168.1.2 as well as info from rest, which is are in conflict with other devices on the network. The problem is that im trying to find the printer over the network connections on my windows xp pro, but it does not show on the results. I don't see that there is an icon that does not give me an error. I also tried to see my tracer of the firefox browser with the local IP which has achieved and open the menu normally, showing how the network works. I tried several times to reboot pc and tracer in case they are blocked, but got the same problem. Perhaps there is a driver for win xp to see the plotter on LAN? I need to have your help as soon as possible, because a lot of work to do with the tracer and this question comes back to me.

  PS I should mention that I currently have a network with 3 pc the on the Office that they link together without any problem.

  P.S. This thread has been moved to printers - LaserJet for printers - Designjet & large Format. Forum Moderator - HP

  First off there are 2 homes EIO to the back, so you messed up there. With the power off, install the gl2 card in another location and see if you still have the problem. There may be a plaque on the slot, held in place with a screw at the top and bottom. Just remove the 2 screws and remove the cover and install the card.

• Designjet 110 more ink problem

  I have a Designjet 110plus, model #C7796D. I use Windows 7 Home Premium.

  I'm having a problem with the icons of ink on the display screen.

  When I try to print, the magenta icon flashes and empty bed even if there seems to be a lot of ink still in the cartridge. I installed a new magenta cartridge and the complete play icon, but when I tried to print it changed again to blink empty.  I changed all the print heads and the test came back spent with a cheque in the lower right.

  In searching the Internet, anyone else had this problem posted in 2009 with no resolution of the problem.

  All the help online, that I could find, the problem may be with the ink supply station.  When I removed all the cartridges, there is some spring loading white tabs at the bottom that appear after removing the cartridge. One for the magenta doesn't appear.  I can remove by force the

  tab, but it falls right back down. If I change the ink supply station, can I still get the part and it would be a plug-and-play solution that can manage an average handyman?

  Thanks again David for advice.

  I bought a supply of ink online station.  Followed the instructions you provided and replaced the unit with no additional parts or screws left over.   And 'Voila' it works!

  Sort of.

  The screen still shows power of magenta ink as empty. I ran a test print head alignment, all the colors print fine and it passed.  At least not flashing so that now the printer prints the whole page without stopping. YES!

  I consider the problem solved!

  Thank you for your help,

  David

• DesignJet Scanner 4520: Designjet 4520 Scanner network problems

  I have a Scanner of DesignJet 4520, that very recently stopped working on the network.  Wiring to the scanner is good and the network itself works normally.  I can't get a DHCP address or assign a static IP address to the device.  When I try to assign a static IP address, I get the following error:

  56-62 an error occurred when applying network settings. Check that the entered parameters are valid for the network.

  Thoughts?  Is my scanner goes wrong?

  Looks like you have a Rev A scanner and the software is for the Rev A and B

  The SW is 24.1 the the file name once you have created the bootable image and make sure they match

• HP Designjet 800ps paper selection problems

  I loaded the drivers etc for the HP DeisgnJet 800ps.

  It feels good, but I can't access the book 'Architecture' list set sizes in the "Properties".   I click on 'architecture', but the sizes of the paper do not appear in the drop-down list.  Can someone help me solve this problem.

  I have two other computers, and they recognize the architectural paper selections.   Thank you

  I'm linking you the Designjet forums below. Please just transfer your question their TI will be more likely to have answered.

  Designjet forum

• On the website of the Wall Street Journal, I am not able to print to the print format. Never had a problem before with this.

  I click on the print icon in an article in the Wall Street Journal. A new window opens with the article in print. When I print, I get blank pages paginated, matching the length of the article. Corner of the page is displayed on the top left the title of the article; angle will appear on the top right, the web address of the article; on the lower left corner will appear the pagination; and on the lower right corner will be the date and time of printing. It's just how any article would print; the only difference is that I do not get the content of the printed article.
  It started only a couple of days. I don't have this problem with other publications, but this problem does not exist with other browsers.

  In case you have changed the default Page Setup scaled, make sure that shrink Print CheckBox is enabled before running the printable page.

• Toshiba e-Studio 167: printing documents ODT LibreOffice 4 Linux problem

  Hello

  I'm trying to solve a problem when I try to print some documents ODT of LibreOffice 4 (13.04 Ubuntu operating system) on a Toshiba e-Studio 167 printer.

  I have not received any response from my service technical so I hope someone can help me here.

  When the document contains fonts as liberation, liberation Serif, etc., I get a printed page with the following error:

  ERROR:
  invalidfont
  THE OFFENDING COMMAND
  $definefont
  BATTERY:
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  --nostringval--
  17

  However, if export ODT file in PDF format and print PDF files or if I print another PDF Acrobat file, it is not a problem. It works too, if I print a document Word (doc) opened to LibreOffice (usually with a Times New Roman font); in this case, LibreOffice indicates that the document has Times New Roman font, although it is not installed on the system, at least I can't see fonts in the drop-down list. In these cases, that the document prints well, but the new ODT documents with fonts system fail, what happens?

  If I print in a local printer (HP Laserjet 1020), he has no problem with any document.

  I tried to apply the solution given in the son, but if I change the type of PostScript printer language, I get the same error:
  https://AskUbuntu.com/questions/69014/unable-to-print-from-LibreOffice
  https://AskUbuntu.com/questions/68909/problem-printing-in-LibreOffice-writer-but-not-in-Adobe-Acrobat-Reader-or-Evolut

  This is how I installed the printer driver:

  https://localhost:631
  Administration-> "Add printer".
  The wizard has automatically detected the network printer: Toshiba e-Studio 167 Foomatic / Postscript (en)

  This site says that the printer works under linux:
  https://www.OpenPrinting.org/printer/Toshiba/Toshiba-e-Studio_167

  Any help would be apreciated.

  Thanks in advance
  Juan José Alonso

  News about your problem?

  I found this page from Toshiba on e-STUDIO167
  http://business.Toshiba.com/USA/product/multifunction/small-workgroup/e-STUDIO167.html

  This brings me to the managers for e-STUDIO167
  http://business.Toshiba.com/support/downloads.jsp?SELCTD_MODEL=e-STUDIO167&AXN=SELCTD
  Unfortunately, there is no driver official Linux so can't say for sure if this printer is compatible 100% linux.

• Printers HP PageWide: infrequent use of printer HP PageWide can cause a problem on inkjet printer

  On the new printer HP PageWide, if I don't have that infrequent use, ink clog or dry as it does on inkjet?

  Plugged in and turned on, will be fine.

  Unplugged or turned off, 3 months is the longest we would like to see it go.

• HP Envy 4502: printer connection on my laptop wireless problem

  I installed the software on the disc that came with my new HP Envy 4502 printer on my HP laptop. He says that the software is installed correctly, but the printer is not connected wireless. Have you tried connecting via the usb cable and it worked. However, whenever I try to connect wirelessly, it fails to connect.

  I tried troubleshooting tips sevral time but still have no luck.

  My husband was able to insert the disc into his Dell laptop and connect the printer even wireless with no problems at all. This laptop is Windows 7 Professional.

  I'm getting more and more frustrated by the present, thank you I am a novice where computers re concerned, but that he thought that by purchasing an hp printer to go with my computer hp laptop, things would be easy.

  Help, please

  Take a look at this link on the implementation of WiFi.

• 6500 has more: cannot print Surface Pro 3 - a persistent problem that is ALWAYS the case.

  3 surface Pro, Windows 10 (64 bit) put in place. I constantly have problems everytime I try to print documents. Print HP says the wireless network window is not connected, but the printer wireless network Test report HP says it's on - GO. The drivers don't need to be updated on the Surface Pro, according to the HP Support Online, so please - HP should have some kind of awareness of it. Cannot access the HP Print and Scan Doctor - the link does not work. Seriously. It is a basic functionality.

  Currently I have to spend more than an hour trying different ways to get printing to work, sometimes, it will randomly to print a document and return then to not print. It is not a sustainable situation. I avoid the impression of this set-up as far as possible, that this song and dance is always necessary, but sometimes I can't do it otherwise.

  I lost a lot of time on is is no longer viable to use HP printers in my office at home and we...

  Way forward please, or I'll be dumping this HP printer and not come back.

  Hello

  Thank you for using the forum.

  You have installed the HP printing software on your PC? Otherwise, here's the link to download and install the prinrer software. We recommend that you download the full features.

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6500a-e-all-in-one-printer-series-E710/4083974/model/4083870#Z7_3054ICK0K8UDA0AQC11TA930O2

  The wireless test report will indicate if your printer is connected to the network, you will still need to install the software of the printer in order to print. (your current ability to print can be by pilots In-OS)

  The impression and doctor apps can be found on this link:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps!

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• HP Laserjet printer does not print even though it says no problems found

  Original title: the orange light on my printer continues to Flash if she said no problem was detected! and it does not print!

  my printer is a HP LASER JET professional CP1020 SERIES.

  Hello

  Were there any changes made to your computer before this problem?

  I suggest you try the methods mentioned below and check if it helps:

  Method 1:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  If the problem persists after that run above mentioned methods, then you need to contact HP to the following link and make sure with them about this:

  http://h30434.www3.HP.com/

  Hope this information is useful.